Thanks Fran, Bill, and the RPM team!! Car feels amazing...pulls really hard but drives around town like stock. I'll definitely be back for the next round of upgrades 🙂
What did you all have done I’m hoping for similar numbers, I’ll have headers/x pipe, full E, upper and lower pulleys, intake, and stage 3 cam. Love your Z
Thanks for the video. finally bit the bullet and got mine back. Ships out to tx friday. gonna have fun driving it back me thinks. Much love and i appreciate you guys for tolerating my questions.
Fran I heard you mention the tires not holding. So what's the most whp can you put down on Michelin Pilot Sport All Season 4 run flat tires? Im asking because my C7 Z is a daily driver but I would love to add a little more go without changing the tires.
Just depends on the duty cycle , like he said 35% is like max on these cars , anything more then that the car starts to do weird shit and almost impossible to control fueling especially in the higher rpm’s.
the car makes over 40 whp less power than the prevoius zl1 with straight 93 octane with the same mods is that right ? kong x port head cam package headers intake? pls correct me if im wrong
All there stage 5 high hp cars are centrifugal same with his old race car , the linear curve down low makes it easier to hook on the street and way better high end gains for roll racing compared to a roots .
my guess is 600-650 ur gonna run outta fuel on stock injectors. im no fran though. best option is to let them suggest a package. take it from someone who's been down the "buying your own parts route." package deal always seems to win.
People EVERYWHERE have no idea how to drive Fran. Just because they making these cars and pick up trucks with almost 400 crank horsepower everyone thinks they’re Mario Andretti at 5 AM and 5 PM.
Why don’t more people use the windshield washer fluid reservoir for meth?? It more discreet and you can still use it to clean your windshield. Oh and it has a built in low fluid light.. 😂😂
Thanks Fran, Bill, and the RPM team!! Car feels amazing...pulls really hard but drives around town like stock. I'll definitely be back for the next round of upgrades 🙂
Badass car
What did you all have done I’m hoping for similar numbers, I’ll have headers/x pipe, full E, upper and lower pulleys, intake, and stage 3 cam. Love your Z
What cam u got in it?
I dont know if it just me or not but the C7 Z06 is the best looking vet out there and with 950+ its perfect 👌 chef's kiss
If only the 8-speed wasnt more like GMs 10speed.... it would be the perfect car. From a Manual 7 owner.
That's a clean looking ride. Perfect power level, sound and looks 😍
Thanks for the video. finally bit the bullet and got mine back. Ships out to tx friday. gonna have fun driving it back me thinks. Much love and i appreciate you guys for tolerating my questions.
Very cool ride. Great going guys 👍👍👍
Man they make it look so easy . I need a cam in my c7 z06 . I just want 800 hp I need a quote only thing sucks is I’m in Oklahoma
We ship cars in from all over the country.
I’m doing a 800whp build right now in mine! Katech is doing my build
7:55 what’s the difference of the Z06 & ZR1 with that fitment? What did they change in the ZR1
More test drives on your builds Fran!
Great video guys!
Fran I heard you mention the tires not holding. So what's the most whp can you put down on Michelin Pilot Sport All Season 4 run flat tires? Im asking because my C7 Z is a daily driver but I would love to add a little more go without changing the tires.
I heard spit works
They suck at stock power levels haha.
Shiiid, C7’s above 700whp they’ll recommend putting a tire on. That’s why I won’t mod mine.
Great info! Dsx and lt4 fueling 16psi and 40% E about all you eant to push without meth?
Just depends on the duty cycle , like he said 35% is like max on these cars , anything more then that the car starts to do weird shit and almost impossible to control fueling especially in the higher rpm’s.
the car makes over 40 whp less power than the prevoius zl1 with straight 93 octane with the same mods is that right ?
kong x port head cam package headers intake?
pls correct me if im wrong
You guys do great work up there good video too😊
Fran, I’m sure you’ve answered this before but what’s the minimum oil temp you like before hammering the throttle
130 degrees ish
120-130 on lower power cars. 150-160 on big power
My C6Z with 600 wheel ?
@@marklagasse2012that’ll be in the 120-130 range
Just a random question, when you guys take the racks out of some of these cars are you able to get the alignment pretty close when its all done?
The way the steering shaft is splined to the intermediate shaft, it's almost impossible to not line it back up.
Great video you guys Fran how's your little girl doing we haven't seen her in a while
What do you like; Centrifugal or roots?
All there stage 5 high hp cars are centrifugal same with his old race car , the linear curve down low makes it easier to hook on the street and way better high end gains for roll racing compared to a roots .
@@LarryLoudPack204 yeah definitely. I’m just curious as to what people in the comments prefer.
How was it making so much boost ? Even on a stock pulley ?
Great video, thx !
I can’t wait to get my car over to you guys! Just waiting for a few more parts to come in 😬
We have parts in stock. No need to get them from somewhere else
did this need a fuel system for these upgrades? around what WHP do you need to do lowside/full fuel system?
my guess is 600-650 ur gonna run outta fuel on stock injectors. im no fran though. best option is to let them suggest a package. take it from someone who's been down the "buying your own parts route." package deal always seems to win.
They did that 2650 and cam only car not long ago and it made 732 on a cold pull stock fuel system
What size is the lower 18%?
What’s the fuel system setup on this car? aux pump? Stock injectors?
Yes. It’s listed. Our fuel system. Stock injectors
@@RaceProvenMotorsportslow side fuel system?
so is it 800 or 950?
What would it have made on 20psi??? Nice work guys
1000 ish but need built short block to run 19-20 pounds safely .
I wouldn't run 20 psi on stock internals
@@Bmackins94 people make over that on stock Shortblock all the time though right?
“What kind of dumb shit you gonna ask me now”. LMAOOO!!!
So dam funny !!
E40... Tell me when to go!
What kind of budget is someone lookin at to get to 750-800 in one of these ?
20k+ for sure
@@thomasborduas6834not that much
No way, how headers$1500, exhaust$2K, Kong Port w103 TB and upper pulley $3500, E85 sensor $400 what else do you need?
People EVERYWHERE have no idea how to drive Fran. Just because they making these cars and pick up trucks with almost 400 crank horsepower everyone thinks they’re Mario Andretti at 5 AM and 5 PM.
Why pull the heads for a cam swap?
To replace the lifters
@@Bmackins94 ah I didn’t notice him doin that. Good eye
Assume! Felix Unger of The Odd Couple 1972! lol
The way you guys treat Garret borders on workplace harassment. Report them to HR Garret. Stay strong little buddy. We feel for you 😂
Worried about those fuel lines they are one time use, and have to be replaced every time you take them off. 😮
Wtf r u talking about ?
@RaceProvenMotorsports fuel lines to the pump and rails under the supercharger
Easy with blower.
Damn wheel spin 10,000 RPM LOL
Says people don't know how to drive, but drives while looking at the phone and laptop on the passenger seat. 😂
Why don’t more people use the windshield washer fluid reservoir for meth?? It more discreet and you can still use it to clean your windshield. Oh and it has a built in low fluid light.. 😂😂
Bc they leak. They are not made for methanol
Complaining how people drive when you back up while looking forward and play with your phone is a little hypocritical.
Which one is faster? This one or the 1k hp c6 z06 from previous video