Это видео недоступно.
Сожалеем об этом.

Andis 5 speed cord replacement

Поделиться
HTML-код
  • Опубликовано: 14 авг 2024
  • Get your clipper parts here: www.sharpedges...
    ==============================================================================
    Andis 5 speed cord replacement
    Timestamps:
    0:00 Intro
    0:10 Opening the case
    0:24 Pulling the old cords from the board
    0:36 Snapping the new cord on
    1:00 Reassembling the clipper
    Transcript:
    Merry Christmas, Groomers!
    My name is Jessie with Sharp Edges in Oklahoma.
    Today I want to go over replacing the cord in the Andis 5-speed clipper
    Okay, so what you want to do is take out these 4 screws which I’ve already done, flip the clipper like this, and you’ll take the top of the case off. And you’ll see here we have a, pull this up, black cord and white cord here.
    Pull the white one out. Hold this butt down on this board as you pull up on this which sits on that post. Same thing as the black one. And get rid of your old cord.
    Then we’ll come in with the new cord. You’ll want the bottom post, and the black wire - this is important - to snap on together. So, we’ll snap that on.
    The top post gets the white wire. This is a DC motor, so you want to make sure those are put on there properly.
    We’ll put our bale hanger back in here. To set this cord in here, you want to do it with this groove on the topside because it fits into the groove this slot right here on your top case.
    Set that down into that groove. You’ll fold your wires down out of the way. Make sure your insulator goes back in there, put that in there like that.
    Then you replace the top case.
    Make sure it closes up on each side. Flip it over. Put your screws back in.
    And that’s all there is to it.
    Alright! Merry Christmas! I hope this helps somebody.
    Did you enjoy watching our videos? Hit the like and subscribe button for notifications!
    ==============================================================================
    Do you need freshly sharpened blades, grooming supplies, or expert repair services for your dryers & clippers? Visit www.sharpedges... and find out how we can help you.
    ==============================================================================
    Would love to connect with you on our social media accounts.
    Follow us on…
    Facebook: / sharpedges01
    Instagram: / sharpedges_jessie
    Tiktok: / sharpedgesok.com
    Pinterest: / sharpedgesok
    Linkedin: / sharp-edges
    Google: goo.gl/maps/U5...
    =============================================================================
    Sharp Edges
    3425 N Ridgewood Dr,
    Midwest City,
    OK,
    73110,
    United States
    Phone: +1 405-535-7153
    Find Us - Google Map: www.google.com...

Комментарии • 33

  • @Pigfeelermmk
    @Pigfeelermmk Год назад +1

    I have 3 of these and an AGC model I was about to ship off for Andis to fix for me. Gonna try this first. Thanks for showing how easy this is.

  • @karashea7985
    @karashea7985 2 года назад +1

    YOU'RE A LIFE SAVER!!!!!!! THANK YOU🙏🏼🙏🏼🙏🏼

  • @rosekim806
    @rosekim806 Год назад +2

    Thank you you save my clipper❤

    • @sharpedgesok
      @sharpedgesok  Год назад

      Your welcome, I'm glad it helped...😁

  • @skuppended
    @skuppended Год назад +3

    Thank you so much for this!

  • @rebekahbell5621
    @rebekahbell5621 2 года назад +1

    Thanks!

    • @sharpedgesok
      @sharpedgesok  2 года назад

      Your welcome, I hope it was helpful

  • @neutrogena1122
    @neutrogena1122 6 месяцев назад +1

    Thank you!!!!

  • @user-nl1is7uq4c
    @user-nl1is7uq4c 6 месяцев назад

    Thank you ❤

  • @boibieg.1022
    @boibieg.1022 10 месяцев назад

    Thank you 🙏🏼

  • @ashakes4911
    @ashakes4911 9 месяцев назад +1

    What do you do if the original cord won't easily come out? I've been yanking on the white and black wires and it's not budging at all.

    • @sharpedgesok
      @sharpedgesok  9 месяцев назад

      when they are real stubborn I use a pair of needle nose pliers to pull them off while holding down the PC board.

  • @MyManzanares
    @MyManzanares 10 месяцев назад +1

    Can I replace it with any cord, or does it need to have the box just like the original one.?

    • @sharpedgesok
      @sharpedgesok  10 месяцев назад +1

      No, you can't use just any cord. The Andis 5 speed cord has a DC converter (the black box). You can find them online or I sell those if you need one, feel free to email me.
      sharpedges01@yahoo.com

    • @MyManzanares
      @MyManzanares 10 месяцев назад

      Thank you for your help

  • @melissabevilacqua112
    @melissabevilacqua112 3 месяца назад

    Is there any way to prevent the cord from pulling out of the bottom over time? That’s the only reason I ever have to replace my cord

    • @sharpedgesok
      @sharpedgesok  3 месяца назад +1

      Some people zip tie the cord to the metal hanger on the bottom of the clipper.

  • @JJTruth
    @JJTruth Год назад

    Where do you buy the new cord?

  • @jennifermcdonald8190
    @jennifermcdonald8190 5 месяцев назад

    What if my cords are green and pink ?

    • @sharpedgesok
      @sharpedgesok  5 месяцев назад

      I would think maybe it's not the right cord?

    • @jennifermcdonald8190
      @jennifermcdonald8190 5 месяцев назад

      @@sharpedgesok it was, it just was bought in Japan. I double checked serial number and model. It is a dual voltage unit

    • @sharpedgesok
      @sharpedgesok  5 месяцев назад

      @@jennifermcdonald8190 I can honestly say that that is a first for me…😀

    • @sharpedgesok
      @sharpedgesok  5 месяцев назад

      @@jennifermcdonald8190 I’m not familiar with that color configuration

    • @jennifermcdonald8190
      @jennifermcdonald8190 5 месяцев назад

      @@sharpedgesok I double checked with the plus and minus signs on the board. I tried it and it works again. Thank you for posting tutorials.