Prismatic Powders has over 6'500 colors for powder coating. Been powder coating for two years in my garage. Found a restaurant closing down and bought their old double oven. Took the middle part out of it and sealed it up better. Works great but I'm no pro, more like a one month warrior when buddies want something done. 👊
prismatic powders is the konigsegg of powders. I also do my powdercoating at home with amazing results using prismatic powders products and a harbor freight sandblaster and coating system. saving up and going with the pcs1000 from eastwood soon
I have rough country side steps on my truck and they are powder coated from factory and I can 100% say that it's a super durable surface, even the foot pads are powder coated and I've had them for a few months now and they still look brand new, also I live in area with basically nothing but sand for dirt so you can probably imagine that my boots are probably grinding against that surface a lot
I just want to bring this to your attention. I log on Offset Custom to check out wheels. I put in the application of the vehicle and size I'm looking for . I scroll down the fist page and it would say 1 of 255 pages. But it wont let me go to next page. It worked fine a week ago when I was looking on Offset website. But all week it wouldn't let me go to the next page. Was looking until this Corona Virus come along. Now since companies are back to work in Mississippi. Started looking again but wont allow me to search different pages.
Im doing my mcgaughys 8 in lifts long arms and springs candy blue been practicing with the oven i have but those parts are to big like you said need a BIG over
I think I’m going to go powder coat just for the durability and it fits my build more than anything else. My truck is going to be used more as a daily/adventure car and I like camping and hunting/ fishing so it’s got kayaks up top and lots of gear to carry. Typical 4runner stuff. Lol
I’d like to get a set of fuel krank rims in a semi-gloss black. Would powder coating be best? If I do that, is it possible to keep the little “F” symbol in the middle silver?
I am assuming you cannot mix decals with powder coat in any way. Obviously one could put a decal on any smooth surface after coating but I am referring to protecting a set of tank decals for the long haul, usually by applying clear coat over the decals. But a decal in a powder coat oven under clear coat would burn up, correct?
I understand the pain of finding a competent powder coating place. Here most people don't prep and prime the metal properly. So any black powder coated metal gets extremely hot when out in the sun.
A properly prepped, primed and powder coated piece of metal will not get hot when exposed to direct sunlight. Even black ones will not get hot. I didn't believe it until I saw it for myself. That epoxy primer makes a huge difference.
Great video. I'm curious I painted my exaust hmdi ports with a high heat engine enamel spray paint(Rust-Oleum) lasted 7 months before small chipping started which I believe pressure washing didn't help. Not to mention I didn't use a primer. Will a powder coat give me more life on these exaust ports?
You can still get high gloss from powder coating. I do this for a living at a custom shop. Another myth about powdercoat is that you can't buff or polish it. You actually can. I've wet sanded and polished wheels and bumpers before
@@2gd532 theres alot of myths out there..i powder coat and love the look over paint..if you wanna save money use paint if you want something that looks great and lasts use powder..
I've got a leveling spacer kit. It's just 4 pieces of aluminnum all under 5 inches in size. I was quoted $200 for a Matt black powder coat. That price seems a little steep? I'm considering just painting it myself. Any advice?
I am thinking of painting my wheels, but I am stumped on if I should paint the outer barrel or leave it silver? I really want to put my wheels as if its genuinely one color
Why hammerite vs powdercoat? In your experience it looks better? Sticks better? Is durable? Have you done both powdercoating and used hammerite and found the hammerite stood the test of time and just ended up being cheaper? Interested to hear more about your experience with thanks.
Have a safari style roof rack 4’ x 7’ for my 4x4 SUV. The factory paint is failing and has a lot of surface rust. Should I sand the rust off and rattle can it or is powder coat the better choice?
powder is always better for metal. idk what hes talking about depth. ive never seen paint come close to candy or translucent powders. Get your powders from prismatic powders and youll fall in love. never take your stuff to a powdercoater without browsing and purchasing your own powder before hand. Prismaticpowders.com( I am not sponsored, just a very happy customer)
Better for what ? Aging the metal and making it softer and more brittle, you know that happens when bake alloys to 200 deg C several times over in the powder coating process.
@@glitchtheory6609 350 degree F isn't hot enough to do anything to alloys. your not going to ruin a set of forged wheels by baking them at 350-400 degrees F for 10-15 min. its been proven over and over again.
@@Deckageskate666 Is that the same wheel companies that void your warranty if you powder coat your wheels within the warranty period, And its 3 to 4 times those wheels get baked for a refurb and yes it can weaken the metal
@@Deckageskate666 In fact here is a old thread from the subaru forum I am a member of. I bet he would disagree that powder coating weakens the wheels seeing that his alloy wheel disintegrated while driving and he isnt the only one on the thread with a weakened wheel due to powder coating So proven over and over again my arse pal LOL www.scoobynet.com/wheels-tyres-and-brakes-13/924953-powder-coated-wheel-major-failure-images-not-suitable-for-children.html
Hi there. Great video. What about powder coating bike frames. I want to powder coat my aluminum bike frame and carbon fork. What can you recommend me? thanks in advance
Anyone knows the specific color which is used at 7:47, or how this is being created? Kind regards :) (Building my own Bobber from an old '86 XV1100 Virago :))
@@CustomOffsetsTV thank you for fast reply, and just to confirm that was powdercoated right? I'm wondering if it was only 1 coat or one base coat for example black and some type of red over it?
Think your peace ✌ sign should be changed to the normal way around, as it looks offensive to other parts of the world the way you have it....besides, Ringo 🌟 not be happy...lol 😂 ✌ & 💖 🌍 we 🙏
![YoungBoy Never Broke Again - Missing Everything [Official Video]](http://i.ytimg.com/vi/dTYeMZGzOzw/mqdefault.jpg)
Prismatic Powders has over 6'500 colors for powder coating. Been powder coating for two years in my garage. Found a restaurant closing down and bought their old double oven. Took the middle part out of it and sealed it up better. Works great but I'm no pro, more like a one month warrior when buddies want something done. 👊
prismatic powders is the konigsegg of powders. I also do my powdercoating at home with amazing results using prismatic powders products and a harbor freight sandblaster and coating system. saving up and going with the pcs1000 from eastwood soon
That’s dope
I love the gun in the background! 😍👌
I like your objective views on the pros and cons of both. Thank you.
Me over here with my plasti-dipped oem rims:😭
Bryson Kuhn my Walmart rattle can steel wheels 😂
As long as you did it right I won’t knock you lol
Ahhhh nooo😭
@@stevenmoreno131 rattle can looks great if you do it right
Shit bro, you gotta start somewhere.
I just wanna see fullers gun collection 🤣
Same
Me to
Hell Yeah
Rtid02 same
……same
I have rough country side steps on my truck and they are powder coated from factory and I can 100% say that it's a super durable surface, even the foot pads are powder coated and I've had them for a few months now and they still look brand new, also I live in area with basically nothing but sand for dirt so you can probably imagine that my boots are probably grinding against that surface a lot
Fuller, being in the powder industry for for a while you hit the nail on the head. I can tell you have been through a lot of powdercoating!!!
there still is a healthy amount of prep work with powder coating as well
Me with my rattle can steelies. Didnt do the best prep but looks good at a distance.
Ryan Mayer did it all at home
Great comparison, couldn’t have made it simpler!
That's a really nice rifle in the back ground
nice 👍🏽
Full size SUV or mid size SUV???
Love the powder coat
SUV video? 🤣🤣
Full size for sure
dope footage
You can powder coat plastic, it just requires a different type of gun, the gun burns the powder and when it lands on the plastic it cures
So it skips the oven process? Thats cool
I recommend Cerakote for wheels. Pricey, but really nice durable finish.
Good info! Thanks...
I want to get my exhaust in black matte but it’s chrome stock so should I go for powder coating or paint?
Hit up Promax Custom Powder Coating in Big Bend Wisconsin they have tons of colors. Full blasting and powder coat for $300 bucks for a full set
Bull bar or bumper
I just want to bring this to your attention. I log on Offset Custom to check out wheels. I put in the application of the vehicle and size I'm looking for . I scroll down the fist page and it would say 1 of 255 pages. But it wont let me go to next page. It worked fine a week ago when I was looking on Offset website. But all week it wouldn't let me go to the next page. Was looking until this Corona Virus come along. Now since companies are back to work in Mississippi. Started looking again but wont allow me to search different pages.
Shoot us an email to info@customoffsets.com so we can check into this issue ASAP!
Im doing my mcgaughys 8 in lifts long arms and springs candy blue been practicing with the oven i have but those parts are to big like you said need a BIG over
Oven*
Thank you , great info
Glad it was helpful!
Love your jacket
I’ve been debating on which one to go with on my custom bumper for my 4th gen 4Runner. Paint, bed liner, or powder coat? 👀
Powdercoat bro
Paint
I think I’m going to go powder coat just for the durability and it fits my build more than anything else. My truck is going to be used more as a daily/adventure car and I like camping and hunting/ fishing so it’s got kayaks up top and lots of gear to carry. Typical 4runner stuff. Lol
I’d like to get a set of fuel krank rims in a semi-gloss black. Would powder coating be best? If I do that, is it possible to keep the little “F” symbol in the middle silver?
Nice ruger ranch!
Thanks man die the video. This really helps. In thinking of getting my wheels powder coated a gloss black
There's no one very near me who does powder coating! DAMNIT!
Where are you located?
I am assuming you cannot mix decals with powder coat in any way. Obviously one could put a decal on any smooth surface after coating but I am referring to protecting a set of tank decals for the long haul, usually by applying clear coat over the decals. But a decal in a powder coat oven under clear coat would burn up, correct?
I understand the pain of finding a competent powder coating place. Here most people don't prep and prime the metal properly.
So any black powder coated metal gets extremely hot when out in the sun.
Well that’ll be common with anything the color black in sunlight
A properly prepped, primed and powder coated piece of metal will not get hot when exposed to direct sunlight. Even black ones will not get hot. I didn't believe it until I saw it for myself. That epoxy primer makes a huge difference.
I hate powdercoat on wheels because if they get chipped it will start chipping away.
Powder coat or paint Calipers?
You can’t judge a Shop appearance by the work
They do .
I’ve seen momma
Pop small
Shops WAY better than hug invested powder coat companies .
I like your gun
Best paint
Great video. I'm curious I painted my exaust hmdi ports with a high heat engine enamel spray paint(Rust-Oleum) lasted 7 months before small chipping started which I believe pressure washing didn't help. Not to mention I didn't use a primer. Will a powder coat give me more life on these exaust ports?
Yes it will
should i paint or powdercoat my chrome bumpers
I would do a paint because if you want a more glossy finish I think
You can still get high gloss from powder coating. I do this for a living at a custom shop. Another myth about powdercoat is that you can't buff or polish it. You actually can. I've wet sanded and polished wheels and bumpers before
@@2gd532 theres alot of myths out there..i powder coat and love the look over paint..if you wanna save money use paint if you want something that looks great and lasts use powder..
what gun is that tho
Looks like the Ruger american Ranch
@@seanc4564 from this distance it looks very similar
I've got a leveling spacer kit. It's just 4 pieces of aluminnum all under 5 inches in size.
I was quoted $200 for a Matt black powder coat. That price seems a little steep?
I'm considering just painting it myself. Any advice?
Can we get a truck with matching firearm video? Lol but.... seriously can we?
I am thinking of painting my wheels, but I am stumped on if I should paint the outer barrel or leave it silver? I really want to put my wheels as if its genuinely one color
pengecatan menggunakan serbuk sangat mahal n hasil sangat bagus
melalui proses oven pengeringan yang cepat kering
Nice video, I will stick with hammerite paint than powder coating, works for me... 👍
Why hammerite vs powdercoat? In your experience it looks better? Sticks better? Is durable? Have you done both powdercoating and used hammerite and found the hammerite stood the test of time and just ended up being cheaper? Interested to hear more about your experience with thanks.
🔥🔥🔥
0:24 What caliber is that gun in the background???
It's airsoft
I like the pew pew machine
What about thinner metal.. like wiper blade arms.
Can powder, but for something like that, a good paint job on it would be plenty
Have a safari style roof rack 4’ x 7’ for my 4x4 SUV. The factory paint is failing and has a lot of surface rust. Should I sand the rust off and rattle can it or is powder coat the better choice?
Roof rack, I'd powder personally
powder is always better for metal. idk what hes talking about depth. ive never seen paint come close to candy or translucent powders. Get your powders from prismatic powders and youll fall in love. never take your stuff to a powdercoater without browsing and purchasing your own powder before hand. Prismaticpowders.com( I am not sponsored, just a very happy customer)
Better for what ?
Aging the metal and making it softer and more brittle, you know that happens when bake alloys to 200 deg C several times over in the powder coating process.
@@glitchtheory6609 350 degree F isn't hot enough to do anything to alloys. your not going to ruin a set of forged wheels by baking them at 350-400 degrees F for 10-15 min. its been proven over and over again.
@@glitchtheory6609 why do you think high end wheel companies powder coat their wheels instead of painting them?
@@Deckageskate666 Is that the same wheel companies that void your warranty if you powder coat your wheels within the warranty period,
And its 3 to 4 times those wheels get baked for a refurb and yes it can weaken the metal
@@Deckageskate666 In fact here is a old thread from the subaru forum I am a member of.
I bet he would disagree that powder coating weakens the wheels seeing that his alloy wheel disintegrated while driving and he isnt the only one on the thread with a weakened wheel due to powder coating
So proven over and over again my arse pal LOL
www.scoobynet.com/wheels-tyres-and-brakes-13/924953-powder-coated-wheel-major-failure-images-not-suitable-for-children.html
Nice Ruger American ranch rifle
Gotta love the 5.56 suppressed 🤩 -Fuller
@@CustomOffsetsTV yes sir great gun for the price.
Is there anything Fuller doesn't know?
Hi there. Great video. What about powder coating bike frames. I want to powder coat my aluminum bike frame and carbon fork. What can you recommend me? thanks in advance
Best bet would be to talk to a powdercoater local to you!
I just powder coated my Yamaha RD350 bike frame yesterday, turned out amazing. Go for it.
@@CustomOffsetsTV yes I did.
Can you put clear film over paint rims?
what do you mean? like a clear bra?
How do one paint over powder coat?
Scuff it up and paint it, or strip to bare material and go from there!
Is powder coat more resistant to the elements
Yes it is!
Hello
Anyone knows the specific color which is used at 7:47, or how this is being created? Kind regards :) (Building my own Bobber from an old '86 XV1100 Virago :))
Illusion Cherry was the color of that lift!
@@CustomOffsetsTV thank you for fast reply, and just to confirm that was powdercoated right? I'm wondering if it was only 1 coat or one base coat for example black and some type of red over it?
if i powder cost my rims do i get them ceramic coated still?
you can yes, you would need to find someone local to you to get them coated
You should try building a car after covid 19
Ruger American ranch
RUclips isn’t going to be what’s in the background.
👍🇺🇲
Fuller ,is that a Ruger American
My dad owns a powder coating company
thanks for sharing lmao
Soooo not comparable to undercoating
Think your peace ✌ sign should be changed to the normal way around, as it looks offensive to other parts of the world the way you have it....besides, Ringo 🌟 not be happy...lol 😂
✌ & 💖
🌍 we 🙏
First comment
Check out Unknown Coatings. I believe he is out there around y'all's way OffSet. He is A1…did a mean Chameleon Violet