DIY Tube Notching Plasma Cutter (Tube Notcher Hand Held)
HTML-код
- Опубликовано: 12 июл 2020
- Buildplans: www.etsy.com/de/shop/Madebyth...
New Video Sheet roller: • How to build a DIY She...
My Welding Table: • Welding Table Build wi...
After the first cut i was smiling :D turned out pretty good. "Glad it worked"
The steel tube was a 42,4x2mm (1 1/4 ) tube, the Aluminum template was a 50x3mm Tube.
Ok.... you have to build for every tube and angle that you need a template but than you can use it hundreds times :)
The 45° angle it allmost the last angle that you can cut on the Welding Turn Table! After that the plasma cutting torch is not able to go back and forth without stucking and jumping on the template! Thats why I put a little bit grease on it. Probably there must be another suport to push the torch back...another story!
P.s: Also you are able to build a template for just straight cuts or certain angles, up to you :)
And if you liked it don't forgot to give me a thump up Хобби
We are stuck in 2020 while this guy is living it up in 3000. What a king ! 👑
Thank you for that nice comment 😅
Малодец мужик. арегинально.просто и повторяемасть деталей по шаблону.хорошую идею кинул.хоть и для других задач.красавчик.
I watch A LOT of RUclips videos and come across many great projects/ideas. This ranks at the top! Not only is it a genius idea, but seems fairly simple to make. Rarely do the two go together. Now….to make your motorized chuck.
ruclips.net/video/bOetvXZ053Q/видео.html
Dude, you outdid yourself again, this is so awesome! Love the creativity and the solutions. Smart and efficient. Thanks for taking the time to film this and sharing it with us!
Thank you 😊 ... you are welcome 😁
Great idea! make the patterns double ended for more angles and put a spacer on the torch tip to get a little stand off so you don't burn up tips too fast.
Insanely ingenious. Well done sir!
Thank you 😁
This is my first Metalist exposure. I've ranking you in personal top 3 favorites with Kwando and Urchfab.
Thank you 😊 nice 😁👍🏻
Pure genius. Everything you do it amazing
Thank you 😊
Sir you are very cleaver and have a problem solving inventive brain better than most. I think you deserve a pillar drill. 👍
Thank you 😁
For notching tubes? 🤔
I have always wanted to make a CNC one. Super cool execution! Great work.
Thank you 😊
Great enginuity, not just the craftsmanship but video itself.
Thank you 😁
Now thats crafty... i dig it.. thanks for sharing
ты головой, работаешь не хуже чем руками! молодец! I like it
Thank you 😁👍🏻
Simplest are the best ideas.. brilliant coming along nicely 🙏🙏👍
Thank you 😁
Exceptionaly good cheap simple.
Ideia genial! Irei fazer um igual! gratidão!!
Use "wing" bolts instead of phillips screws, easier.
Yes thats right have to Order some, i just had them in my shop 😅
@@TheMetalist Or just make your own.
great alternative to hole saws, thanks for sharing !!!
very impressive, thank you for sharing your ideas with us
Very clever. Your creative mind is endless in what you can visualize. Thanks for sharing. Joel......
Thank you 😊
Always coming up with great ideas! Well done!
Thank you 😁
way better than i was expecting and a bit cheaper than 60k+ cnc pipe cutters... i need to make one!
I agree with DVC, Absolutely genius! Man you have a serious gift! Thanks for the how to. Now mabey I can build my son that gokart.
Awesome 💪
Thank you 😁
That is a really clever idea, I like it.
Thank you 😊
Very cool idea that could be adapted for many applications there hand holding a torch even with a guide isn't good enough. Going to have to search out the build of the rotary fixture. My issue with this is the time and effort put into the build isn't worth it in most applications. I could see this as being helpful for garage production runs depending on what the parts are being used for. I'm also not a fan of plasma cut notchers in general. They don't really save much time. You can't properly weld those joints without cleaning up ALL of the dross and plasma cut edges. The traditional drill powered notcher is slower to cut but there is very little cleanup. Plus the adjustability can't be beat by anything close to affordable. Awesome video. Awesome idea. Keep being creative because even though I don't see this as being very practical I absolutely got something out of it.
Magical! This is the way to notch.
This is what it is about.
Perfect!!
Thank you 😁
Love this! Thanks for showing us! Cheers!
Einfach super genial 👍🏽👌💪😍
Just found your channel. Great work!
Fantastic Demo ! Well done that man!
Cool, I’m subscribed all the way from Cape Town, thanks for showing me more uses for my plasma machine
Hi 👋 you are welcome 😊
No practical reason for me to watch this video ....but def watched whole thing ....ingenious
You are a genius. Great job man.
Awesome build.. very ingenious 👍🏽🇺🇸👍🏽
Brilliant build! Clever idea, Thanks!
Thank you 😊
Man, I don’t weld or fabricate lol but I really enjoyed watching this!
Awesome 👍 😊
Sei un grande !
Incredibilmente semplice quanto ingegnoso !
Thank you 😁
New sub and wow, I might pinch your idea for the vice Mount table for the saw 💡👍
Thank you 😁 nice 👍🏻
Yes, that was worth the price of admission alone!
THAT IS JUST PLAIN NEAT! Did I say that with enough gusto? And this video was uploaded on July 13, 2020 - did you just recently have this revelation and create the video? Are there any more at home like this one? That deserves a LIKE and a SUB.
Simple, cheap, adaptable. I like it.
Thank you 😊
Richtig gut! Perfekt wenn man mehrere gleiche Teile schnell fertigen will! 😃🤙🏻😎
Dankeschön, ja wenn man nur ein Rohr ausklinken will dann wär der Aufwand schon extrem 😂
That's pretty slick
Idea worth million dollar❤️❤️❤️❤️❤️❤️👍👍👍👍👍
Awesome !!! Thank you for the inspiration.
Work smarter, not harder.
These are the type of videos I like, no Stupid intros, no begging to subscribe and like the video. just good old information.
whoa that's neat, so with a quiet plasma cutter and compressor, I can get rid of my saw. I hate cutting notches.
Oh no! Now I'm going to have A.I. nightmares of the swing arm replicating itself.
😅😂
How cool! I liked your metal saw!
Thank you 😊
This man is a wizard 🧙♂️ love the content my friend
Thank you 🙂
Well done. You are giving me ideas man.
Wow, ingenious!😮
Wow..now thats really cool..very smart thinking..great video
Thank you 😁
this gave me 2 great ideas! awesome work
Great tool!
Brilliant idea mate
Thank you 😁
Amazing, thanks!
Making the ally tube double ended Eg: 60 one end 45 the opposite end 90 and 75 on another piece use wing nuts instead of Phillips head screws . Cheers from a old toolmaker in Australia .
That a good idea angles on both sides😁 I just had them screws in the shop 😅
@@TheMetalist Thanks for the positive feedback I have yet to fire up my plasma welder .Not sure if it works upside down here in Australia .
Lol bro, You're a Genius !
amazing job 👏👍
That's awesome!
This is very clever, well done
Thank you 😊
Master of the spark arts 👌
Thank you 😁
THAT. Is. AWESOME!
Wow that works perfectly... very cool
Thank you 😊
Brilliant 👌⚒️
What a goddm genius!
Nicely done ✅👍
Absolutely awesome 👍
Thank you 😊
Great idea!
Thank you 😊
Great idea! I’d just say engineer a way to use a stand off, or see if a regular stand off will work. burn up a lot of tips with it just flat against the metal like that.
Thank you 😊👍🏻
@@TheMetalist I know this is a little late, but they make a sort of training wheel for plasma cutters to keep the tip away if your doing it on something like a positioner
Great set up nice
Thank you 😊
What sort of black magic sorcery witchcraft is this?!
Watches video
Oh, right. I get it...
😅
Hahahaha damn wizards
Very good idea, great job 😊
Thank you 😁
Brilliant. Thank you for sharing.
Thank you 😊
Pretty slick!!
Thank you 😁
Well done sir!!
Thank you 😁
Pretty darn neat
Thank you 😊
That's badass.
Genial und faszinierend wie immer
Dankeschön 💪 😊
Awesome idea dude.
Thank you 😁
Smart and works well 👍🏻 I'm about to make one myself but how do you do when you have a bent tube?
this is great for hand rails. however only one end can be cut and the length is limited with out roller v blocks. but worth the effort if one does a lot of rails.
😀Show Man 👏👏👏👏 congratulations my friend idea brilliant 👏👏👏👏👏👏👍👏
Thank you 😁
1:50 Use a piece of smaller angle bar to get lines parallel to center axis.
This video was in my recommendations. Liked and subscribed.
Thank you 🙂
Лучше не придумаешь Класс!!!!!!!!!!!
BRILLIANT!!
Dats cheatin'! I'm making one this weekend. I love you.
Nice 👍🏻Thank you 😊
Very good, great idea, congratulations
Thank you 😊
What a cool thing!
Thank you 😁
Cool idea
Thank you 😊
Thank you!
Outstanding!!!
Thank you 😊
Brilliant! Subscribed
Thank you 😊
Top!! You are a genius my friend!!
Try chalk dust as a form of lubricant at the end of the template tube. Won't melt during cutting if doing multiple cuts.
Thanks for the tip 👍🏻
It’s cool, but how does it work on full length pipes like a roll cage?
I’ve been tossing around an idea like this but using CNC for the movements and rotation.
But can’t figure out a solution if it’s pre bent tube like a roll cage.
Brilliant 👌🙏
That’s great!
Thank you 😊
You are not of this planet! Amazing brain you got there! How do u come up w this stuff?! Your like the slash of real metal
Thank you 😊
Your welcome! So much fun to watch u make this stuff