Nice job. The arbour shaft slides in and out through the bore of the pilllow block bearings. When the load is applied the shaft will eventually wear. Fitting a cross slide under the bearing assembly would allow the arbour shaft to be fixed to the bearing blocks.
Brilliant work, dude! Nicely done! 😃 A few more of those machines and you probably can start building motorcycles or bike frames. 😬 Anyway, stay safe there with your family! 🖖😊
Nicely executed, something to be proud of in any shop. I had a need for the same issue, however, I used small lathe and a milling cutter. I pulled off the cross feed and replaced it with a clamp to hold the tubing and the milling cutter was placed in the three jaw chuck. Easy Peasy!
Sensacional, parabéns! Vou fazer uma aqui, estou com projeto pra fazer uma rol cage em um Suzuki Vitara, comprei a dobradora agora com essa ferramenta os encaixes dos tipos ficarão perfeitos!
Pretty good build, but making the back jaw for the pipe movable/adjustable in unison with the front jaw would give you a greater range of usable sizes. May not matter for your purposes, but the center of the tube shifts away from your central axis the further you move from the optimum pipe OD. My mind goes to a scissoring mechanism.
Maybe im not seeing the whole picture but I can't see how this would matter? The spindle and pipe are still in the same horizontal centre line and the spindle slides in those bearings. Wouldn't it still cut on centre of the pipe?
@@peterpeterson7665 It would, and like I said, probably not relevant here. I was thinking more towards maximizing usable range. Keeping the intersection at the same x and y point would half the material approach toward the cutter rather than shifting the full diameter. Chances are, he won't be cutting 12" tubing.
Eu admiro mto o seu trabalho pq vc é um verdadeiro e grande profissional do ramo parabéns!!!! Antonio de teresina piaui brasil !!!! Fica com deus irmão e bola pra frente em nome de Jesus 🙏🙏🙏🙏🙏
Everything looks great, an incredible job. But please do something with that bolt head that’s on top of the angle gauge. Something that fine deserves better.
Excelente proyecto muy bien desarrollado y mejor ejecutado , un buen sistema para cortar bocas de pez , gracias por compartir tanta creatividad y conocimientos , un saludo cordial y por supuesto un gran like desde Narón (Galicia) 🤓🔝
![Noob To Max With DRAGON REWORK In Blox Fruits [FULL MOVIE]](http://i.ytimg.com/vi/LnBMOinoOvA/mqdefault.jpg)
It's time that we all come to grips with the fact that this is the most useful person on the internet.
I Agree!!!👍 And Nick with "Homemade in Lviv" he designs incredible wood furniture.
Very good editing, shows all the steps without repetitive scenes
Amazing! This tool is a real heavy duty. Many tools sold in internet are only toys.
I’ve edited my tubing notcher video last day! Video comes out at the 15 th of April. what coincidence!
Very nice build, looks familiar to mine!
Benieuwd wat ab customs ervan weet te maken, zie de video wel verschijnen hahah
Absolutely, immaculate, precision, and perfection.
His knowledge is far above many others but a it of luck is always necessary for success.
Tube notcher...punching for pipe..very lovely machine and very interesting to have it. Thank you for your idea and regards 🌷🙏👌
Nice job. The arbour shaft slides in and out through the bore of the pilllow block bearings. When the load is applied the shaft will eventually wear. Fitting a cross slide under the bearing assembly would allow the arbour shaft to be fixed to the bearing blocks.
ما هذا الابداع وهذه الخبرة شي رائع ان يشاهد الانسان هكذا اعمال مفيدة احييك
Awesome job, I don't really need a tube notcher, but this video just makes me want to go out and make one.
the video is very good and interesting I'm listening and learning from your video🇱🇷🇱🇷🇱🇷.
I’m so proud of your diy I think you the top homemade scratch 👍🏻👍🏻👍🏻💪💪💪
Clean and neat work...the title should be "Workshop Tube Notcher"
Sweet! Top notch tube Notcher🔧👌😎🔝
Brilliant work, dude! Nicely done! 😃
A few more of those machines and you probably can start building motorcycles or bike frames. 😬
Anyway, stay safe there with your family! 🖖😊
Những sáng tác của Sỹ Luân nghe mãi ko phai.. Phúc hát rất hay và ấm áp
Poetry in motion! Great project. Love to do this myself but upskilling required!
Desde Venezuela excelente trabajo gracias por compartir sus conocimientos impecable obra
God bless you, you are more than wonderful, thank you, I am from Algeria💓💯👍
Шикарная работа. Молодец. 👋👍🤝
Ustam, ellerine sağlık güzel
makina olmuş , Türkiye' den selamlar.
That's a totally awesome build.
Una de las mejores herramientas que he visto en la web. Felicito a todos los que la hicieron
Great work. Wish there was a blue print. Would love to tackle this project.
Transfer punches lol. Get yourself a set, real lifesavers. Love your stuff.
That's really incredible wondering what it was for a while. Great idea.
Thank you 😁
Excellent design and execution...hats off
Its amazing great idea keep it up God bless you long live happy with your family
Perfekt, sehr gute Idee und sehr gute Arbeit 💪👍 ich bin begeistert 😃
Danke 😀
Nicely executed, something to be proud of in any shop. I had a need for the same issue, however, I used small lathe and a milling cutter. I pulled off the cross feed and replaced it with a clamp to hold the tubing and the milling cutter was placed in the three jaw chuck. Easy Peasy!
Wonderfully built.
I started making a tube notcher out of 3/16 steel. I think you inspired me to finish it. thx.
Great work! Has to be one of the best tools I've seen for that purpose. Thanks for sharing.
Im compled talent free in welding, at the end i got scrap. Greetings from Germany.
Excellent design, beautiful build. Well done.
You really have great ideas and the ability to take action👍👍👍👍
Dude!!!!! Pure Genius...👍👍
Thank you 😁
Sweet build. Good job
Great build. I’m gonna build one for sure.
Thanks for the advice in the video
No Panie, to ja jestem ciekaw co teraz zmajstrujesz przy pomocy tego sprzętu. Dobra robota 👍😎
Dziękuje 😁
I want to make one so I can accurately build a recumbent trike with clean joints and measured angles to get good caster/ camber on the steering.
Great, great and great work. Wery simply and profesional mashine.
Молодец! Классный инструмент и руки из плеч!
WARNING - Genius at Work
If there was a heart icon instead of like here, I would have made you click on the heart icon ten times.. ❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️
A nice way of working, I like that
You’ve almost got it champ.
Very well thought out.
Impressive build sir... and a perfect complement to your shop.
Thanks for the video.
Thank you 😁
This is Man, is Very Very good!!!!!!!!! 👏👏👏👏👏👏👏👏
Thank you 😁
Wykonane rewelacja.. Stabilne i może działać swoją robotę
Dziękuje 😁
Excellent as usualy
Very nice notcher.
that's pretty awesome 👍 very inspiring and creative
Sensacional, parabéns! Vou fazer uma aqui, estou com projeto pra fazer uma rol cage em um Suzuki Vitara, comprei a dobradora agora com essa ferramenta os encaixes dos tipos ficarão perfeitos!
Love your work!
Thank you 😁
Great video I love the way you did the handle this is a watch it twice or more video for me !
Totally agree. I gotta watch a few times and take notes to build my own. Such a valuable tutorial video here!
Very good Idea👌👌👍
As always, you are a class act. Maybe a motor and gearbox added in future..
Great build 👌👍
Thank you 😁
Hola brillante excelente impresionante que calidad de construcción ya me suscribí, Saludos desde Argentina.
VERY NICE REALLY GREAT I LIKE GOD BLESS YOU 🌴🌴🌴 JAVED IQBAL SIALKOT CITY PAKISTAN 🇵🇰🇵🇰
Best one l,ve seen. Well made
thanks bro. Great video
Nicely done!
Great build
Thank you 😁
Excellent
Thank you 😁
Wow great job my friend new friend and the philippines stay safe and god bless
Wow amazing build 👍👍👍👍👍
Thank you 😁
This is really, really nice - thank you!
По-моему это гениально. Правда, для тех, кто занимается трубами
Great work👍
Thank you 😁
I like it. Thanks bro ! Good job
An amazing work. Thanks for share your projects
Thank you 😁
Jak zwykle świetna robota fajne urządzenie do rur świetny pomysł i wykonanie 👍👍👍👍
Dziękuje 😁
Istimewa,, neat and good result, true inspiring
Pretty good build, but making the back jaw for the pipe movable/adjustable in unison with the front jaw would give you a greater range of usable sizes. May not matter for your purposes, but the center of the tube shifts away from your central axis the further you move from the optimum pipe OD. My mind goes to a scissoring mechanism.
Maybe im not seeing the whole picture but I can't see how this would matter? The spindle and pipe are still in the same horizontal centre line and the spindle slides in those bearings. Wouldn't it still cut on centre of the pipe?
@@peterpeterson7665 It would, and like I said, probably not relevant here. I was thinking more towards maximizing usable range. Keeping the intersection at the same x and y point would half the material approach toward the cutter rather than shifting the full diameter. Chances are, he won't be cutting 12" tubing.
Fantastic
Eu admiro mto o seu trabalho pq vc é um verdadeiro e grande profissional do ramo parabéns!!!! Antonio de teresina piaui brasil !!!! Fica com deus irmão e bola pra frente em nome de Jesus 🙏🙏🙏🙏🙏
Harika makina seni tebrik ederim Türkiyeye gönderme imkanı varmı nasıl ediniriz aleti fiyati ne kadarı
Everything looks great, an incredible job. But please do something with that bolt head that’s on top of the angle gauge. Something that fine deserves better.
Amazing!!!! Thank you
Great job 👍
VERY WELL DONE!!!!!
perfect, it's so clean 👍👍👍👍👍
Awesome result
The "fixed" side of the v clamp should be solid or have a angle iron welded between them, that way you can clamp shorter parts to be notched.
Thật là tuyệt vời không chê vào đâu được
Good job bro😀👍
Nice and useful work !
Excelente proyecto muy bien desarrollado y mejor ejecutado , un buen sistema para cortar bocas de pez , gracias por compartir tanta creatividad y conocimientos , un saludo cordial y por supuesto un gran like desde Narón (Galicia) 🤓🔝
Tendrás algún plano o algo donde tenga todas las medidas y así poder fabricarlo, sería de mucha ayuda, gran herramienta la que hiciste, felicidades
Hi mister beautiful job professionally done my friend
Thank you 😁
Brilhante idéia, parabéns
Excellent job, thanks for sharing
Great job!
Great job, thank you brother. You are so talented
Thank you 😁
Fantastic!! 💪💪💪💪
Nicely done....👍👍
Thank you 😁
When you show your demo plz mention measurement so that begginer also make this
Me gusta la mecánica en vivo.... me gusta aprender , de quien sabe.... Porque el sabea no ocupa lugar, pero ocupa tiempo.
Very good idea.
Bardzo dobra robota i super pomysł aby taki przyrząd mieć. Pozdrawiam.
Dziękuje 😁
Amazing skills mate!
Excelente 👌 trabajo buenos trabajos y excelente herramientas y mano de obra 👍