3/8 the bigger the stronger hold ng pull ups bar mo. pwede din 5/16 bsta atleast 8 holes and dipende sa pgkakalagay. matibay na wall and maayos ang pgkaka-install ng mga dynabolt.
pwede ang 50, basta maayos ang pagkakalagay. matatag na yan.. suggest ko lang pra sure ka sa size ng hole, both drill bit and dynabolt. bili ka ng caliper sa bookstore khit yung plastic lang, mura lang yun and gamitin mo pangcompare ng size kung match.. it's up to you.. good luck po sa project niyo. kung may tanong po kayo.. ok lang po☺️ good day
you just need to make sure that the dynabolt fits exactly or a little stiff so all the dynabolts would easily turn and properly screw. what do you mean extra thing?
Yes, since they have the same size in diameter. in some or most construction site they do this practice, which i think effective. 👍 you may also watch the full video on the link below👇 ruclips.net/video/WOTpW6iqAU8/видео.htmlsi=0-qzLM7XJ-75rKK9
3/8 is equal to 9.5mm ..much better kung isukat mo yung lapad ng bolt sa drill bit. sa mga hardware sir once you buy the dynabolt alam na nila size ng drill bit.
it depends on the bit there are bits, that has larger tip with smaller bottom that would fit on small drill/small chuck. like yours. as long as it will fit. it will work but would take some time depending on the drill. or I suggest, use a bigger drill that has hammer for an easy work.
full video link👇 ruclips.net/video/WOTpW6iqAU8/видео.html&feature=share7 I also accept donation so i could buy a ladder😅 PayPal me @ jeyworx1687@gmail.com
Tools needed for job 1. Chair 2. mask
Thank you. I would soon have a ladder and the right PPE.
or
I'm also accepting donations 😅
This is specifically for concrete/stone/plaster and not for a metal stud, right?
Yes sir.
Boss if mag drill ba magbubutas muna Ng maliit I mean maliit na drill bit muna bago Yung 3/8 para di mag crack?
mas madali butasan kung from small bit muna then switch big bit.
pwede din nman big bit na agad natry ko na, at wala nman nagcrack na concrete wall..
If the dynabolt is M6 x 75, what is the size for drill in mm
it's 12mm.
you can watch the full video on my channel.
link below 👇
ruclips.net/video/WOTpW6iqAU8/видео.html
Ano Po kaya mas better na 3/8 or 5/16 for pull ups bar Yung NASA shapi malambot Yung free na bolt nila eh
3/8 the bigger the stronger hold ng pull ups bar mo.
pwede din 5/16 bsta atleast 8 holes and dipende sa pgkakalagay. matibay na wall and maayos ang pgkaka-install ng mga dynabolt.
@@jeyworx ty last 😂, which are more better to use 50 or 60 mm. Is 3/8 50 mm dyna enough? Mas madali pati ikabit medj mahaba 60😂
pwede ang 50, basta maayos ang pagkakalagay. matatag na yan..
suggest ko lang pra sure ka sa size ng hole, both drill bit and dynabolt.
bili ka ng caliper sa bookstore khit yung plastic lang, mura lang yun and gamitin mo pangcompare ng size kung match.. it's up to you..
good luck po sa project niyo.
kung may tanong po kayo.. ok lang po☺️ good day
How did you pressed the last bolt to the hole?
Do you had extra that thing?
you just need to make sure that the dynabolt fits exactly or a little stiff so all the dynabolts would easily turn and properly screw.
what do you mean extra thing?
Thanks for addressing my query....
You are using the expansion cover of one bolt to hammer to push the dynabolt fit in the hole..???
Yes, since they have the same size in diameter. in some or most construction site they do this practice, which i think effective.
👍
you may also watch the full video on the link below👇
ruclips.net/video/WOTpW6iqAU8/видео.htmlsi=0-qzLM7XJ-75rKK9
If 3/8 dyna bolt ginamit, 3/8 din na drill bit boss?
3/8 is equal to 9.5mm ..much better kung isukat mo yung lapad ng bolt sa drill bit. sa mga hardware sir once you buy the dynabolt alam na nila size ng drill bit.
Pano po Malaman ma okay na Yung pag ikot sa dyna bolt pag ayaw na talaga umukot let pwersahin?
Yes, kapag halos ayaw ng umikot ok na yun.. matatantsa mo naman . di mo na mabubunot
Can it be installed on plaster?
Yes, usually it is installed in a plastered concrete wall
My wall is made of plastered bricks. I hope it works
@@ALIC7R Hi if the wall was made with good quality. it would definitely work. thanks!
@@jeyworx thanks
boss pwede na yan sa steel bed?.. yung pra nka hang
pwede sir, bsta matibay at maayos ang wall. also mganda pgkakayari ng steel bed and yung pgkakainstall ng dynabolt
Is that mask for dust from drilling? 😅
Face mask for C19. since it's an outdoor work it doesn't need to use a mask for dust. and I don't want to...☺️..
full video link 👇
ruclips.net/video/WOTpW6iqAU8/видео.html&feature=share7
anong bit size po para sa dynabolt na 5/16
12mm drill bit size.
para sigurado eto po full video link ng 5/16 na dynabolt ,👇
ruclips.net/video/WOTpW6iqAU8/видео.htmlsi=2F6DU_tTVnxSG5Tv
If m4 50mm what drill size is suitable?
Bolt Diameter: M4
Length: 50mm
Drill Size: 11mm - 12mm
Driver: PH2
full video link 👇
ruclips.net/video/WOTpW6iqAU8/видео.html&feature=share7
@@jeyworx thank you. Can I fit 12mm drill bit in a limited 1-10mm drill. Because the tip is slightly larger than the bottom, right?
it depends on the bit
there are bits, that has larger tip with smaller bottom that would fit on small drill/small chuck. like yours.
as long as it will fit. it will work but would take some time depending on the drill.
or
I suggest, use a bigger drill that has hammer for an easy work.
@@jeyworx thanks bro. My drill is a hammer drill that just has a small chuck. Your info help me so much. I will find 12mm drill
You're welcome!☺️
Thanks for watching!
Is that 3/8 dyna bolt?
it's a 5/16 dyna bolt.
link below of full video 👇
ruclips.net/video/WOTpW6iqAU8/видео.html&feature=share7
dyna this with what drill size???
12mm concrete drill bit sir..
12mm concrete drill bit sir.
full video link below 👇
ruclips.net/video/WOTpW6iqAU8/видео.htmlsi=m2ilXKJwOWrorinz
Thanks for watching!
Hello, I am in the fastener business. May I collaborate
with you?😊
Hi! How?
@@jeyworx Hi, can I contact with you
Yes,you may send me an email at jcanlas1687@gmail.com
. let me know once you've sent your message. thanks!
@@jeyworx I have contacted you. Have you received my email?
hi. yeah i replied
DIY job with a chair instead of a ladder
full video link👇
ruclips.net/video/WOTpW6iqAU8/видео.html&feature=share7
I also accept donation so i could buy a ladder😅
PayPal me @ jeyworx1687@gmail.com
size
5/16
full video link 👇
ruclips.net/video/WOTpW6iqAU8/видео.html&feature=share7
thank you