Wiring Up Power Folding & Telescoping Mirrors For My 02 F350 7.3L
HTML-код
- Опубликовано: 23 мар 2020
- Today I decided to wire up these 08 mirrors I had laying around for months. I also had all the wire harnesses for it out of the dash and doors, so I figured I would finally spend the time and figure it out. So enjoy!
PLEASE NOTE I AM NOT RESPONSIBLE FOR ANY OF YOUR WIRING JOBS, RESULTS OR ANYTHING YOU DO. LOOK INTO WHAT YOURE DOING BEFORE YOU DO IT
----------------------
SUBSCRIBE FOR 7.3 POWERSTROKE CONTENT
---------------------
Go Check Out My Favorite Video on the Coil Spring Axle Swap in My 7.3:
www.youtube.com/watch?v=whwLz...
----------------------
Here is a Close Second for My Favorite Video (Transformation of My Truck):
www.youtube.com/watch?v=7TC_t...
----------------------
Click HERE for my DASH SWAP videos:
www.youtube.com/watch?v=CwWzg...
www.youtube.com/watch?v=EzFBI...
www.youtube.com/watch?v=nOwXc...
www.youtube.com/watch?v=ZES2Q...
-----------------------
SUBSCRIBE to my channel to stay tuned on more updates of my build, and for all your super duty conversion needs!
----------------------- Авто/Мото
FYI: I have not done a write up because you can get the diagram straight out of the factory 2008-2010 Super Duty Wiring Diagrams manual.
Did you get them fully functional?
Hey so if i want to wire up power mirrors to my truck that currently has manual mirrors. Its best to get a door wiring harness out of another truck?
REEEEEEE..!! 7.3 Powerstroke Turbo Diesel Trucks are for Salt Army Savage Bezerkerz that Eat Wasp Nest..!! Southern Region of the Salty Legion Checkin in from Central Florida, REEEEEEE..!!
Link of mirrors n switch please
Thank you for your information and quick response.
You still got them interior pieces
i actually have a few what are you looking for
@@Jimmyziggy interested in all of them but what you got left?
Cool!
Igor Foster Thanks 🤙🏼
Nice job figuring out all that wiring.
thank you
I find it amazing that you can deal with that many wires successfully, it would make me so angry trying to do this 🤣
7.3L 😂 If you think this a lot you should’ve seen how many i did with the excursion wire harness in my truck, hundreds! 😂 thanks though i appreciate that!! Wiring is not the easiest thing
Can I pay you to make a kit for me for plug and play? I want to do this on my 02 excursion!
I MIGHT"VE made it up to 3:30 but, during that process, I would have said "F" this ... and move on to a new adventure.
You have the patience of a fisherman
Can you tell me how many amps approximately each mirror draws for the power fold and extend? I'm installing a pair of these in my 01 7.3 and I was planning on using my own switches and an 8 channel relay board. The relays are rated for 10 amps each but each one will be controlling a different movement.
What year did you pull these from?
Is the bolt pattern the same as an 08 ford expedition?
Just bought a 08 f250 XL. Do you have an IG I could ask some questions about modding it could. New to fords and could use some help 🤘🏽
Hello, watched your mirror video. Do the switches limit the opening distance or do I need relays, thank?
Mirrors limit themselves, the fold is a momentary signal from window switch through a relay sized controller that says open or closed depending on current position.
Extend is as long as you hold the button down it'll move in or out until it's fully extended or retracted.
Dude I’ll take what you have for the most part. How do I touch base with you
Todd Synder My email is kingshakacustoms@gmail.com
What are asking for front door panels
I'm sure you probably don't have the door panels any more, but if you do how does the color match up to the older 05 tan? Do you know?? if you've still got em let me know.
Did you ever make a wiring diagram? It is probably different for an 01 I assume?
In what area or location of the cab is the folding relay ?
Javier Esquivel On an 08 + dash it’s behind the panel where the headlight switch is. It bolts to the dash frame right there
Were you able to ever type up a wiring diagram?
I'm mostly interested in the power fold relay wiring. (I've got everything else working on mine including telescoping but never tackled the power fold yet)
Power fold relay module
Use a standard 5 pin relay socket
Pin 30 - power unfold out wire to mirrors
Pin 87 - ground
Pin 87a - 12 volt positive (fused 7.5 to 10a)
Pin 85 - fold command wire from mirror switch
Pin 86 - power fold out wire to mirrors
If I'm reading my notes correct from back in 2015 when I did this here it is.
@@AceBoy2099 Nut That Would Keep The Motor Running For as Long as You Hold The Button. And Then Run in Reverse Once Released. Keeping The Motor Running.
@@AceBoy2099 Unless You're Using The Special Relay From Ford
@@JohnstuhDeMonstuh yes, special relay from ford, using a relay socket for the wires to connect to the special relay/controller.
Sorry, I didn't specify that. I wasnt aware you could do it with a standard relay, I suppose you could but you'd need 2 wouldn't you?
@@AceBoy2099 Yes 2, and Some sort of Cutoff Circuit or Timer
How much would you charge to make me a wiring harness for a 2000 f350 ? I have the mirrors and switches , I just want to plug n play .
Javier Esquivel I probably can’t make them as a product just because i would need all the pigtails and the folding relay
I want to upgrade my mirrors with full Electric folding and telescope out. But I can’t find the mirrors. Do have a part number and brand name? Please let me know. Thanks JR.
Junior Banda I don’t have a part number these are just some used oem mirrors i had
Sounds good, thanks for getting back to me.
Ford oem (expensive)
Left (drivers) 9c3z-17683-ma 789.00
Right (pass) bc3z-17682-ma 915.00
Power fold and telescope, comes without the colored/chrome "skull cap" will have to get separate. Prices are rounded, and as of when I did mine back around 2015 from autonation ford white bear lake.
How can I get a hold of you?
Robert Turner kingshakacustoms@gmail.com