Great video! I have a barn-shop I do powder coating in. I use a parts cleaner, then warm water rinse and into a dishwasher without soap on the longest cycle and heat dry. After that I spray with alcohol and air dry. Powder coat and into the oven. I’m building a 3X3X6 ft oven to do four rims at a time. Look into the dishwasher. It works great!
Assembly lube and brake fluid don't mix and will contaminate the entire brake system, breaking down the seals in the master cylinder and all calipers. They look great but if you really love your girl, you need to flush the crap out of the brake system at least twice, or she may not be stopping by or stopping at all.
I know this is an old video but for future viewers, DO NOT use assembly lube, use brake fluid as a lubricant to assemble. I would avoid using that orange disc stop quiet, use the bronze lube that Brembo provides or a similar type. If you're still going to use it, make sure to apply it between the metal side of the pad and the shim. Should not be on the outside or make contact with pistons (shown in this video).
Nice job,great color & finish.the only thing is you should of added is a clear powder coat after the brembo stickers to sandwich the sticker,plus it gives it a higher gloss.prevents from falling off.
That’s ideal but then we would be talking about another level of PC: multi stage coating which his gun might be not up for the task. Probably grab some spray max 2k and call it a day.
Beautiful color. I put the STI 4/2 pots on my '16 WRX and painted them a flouro yellow, but its not acid green enough like those calipers. Will eventually get it done though.
Brake fluid and grease are not compatible. use brake fluid to lubricate the pistons. The grease can cause serious problems especially newer systems with antilock.
You could have made them pop even more by doing a white base coat followed by color and clear coat and the would be super bright and the clear would make them look super deep. It’s alittle tricky 3 stage powdering, but doable.
Love that color I wish we can have all Those tools in my country big fan of your channel, thank you for your videos I am an Evo Owner from El Salvador.
Brembo's own recommendation is to use paint when touching up / refinishing their calipers because the process of baking the powder coat will affect the material properties of the aluminum calipers.
Yo DEVIN!!! You got a part # or suggested replacement for the front caliper halves bolts? The star bolts that hold them together. Stripped tf outta one of mine 😅
Pretty awesome video Devin, I thought about power coating my own BREMBOs but I didn't think it was this easy, I guess I'm risking it and going for it. Keep up the great work 🤘🏼🤘🏼🤘🏼🤘🏼🔥🔥🔥 #BREMBO
Your voice sounded so familiar. Iv watched/subscribed Cameron's channel for so many years and yall both sound identical 😂 yall both have greatly detailed videos! Will sub to you 👍🏻
@dvniemela where did you get the rebuild kit? I’m looking for the exact same 1 for my Genesis and I can’t find it anywhere. Unfortunately, the link for it isn’t working.
Really nice video dude. I just picked up some 17z Brembos and plan on doing the same thing. Great work and great video. Thank you! Quick question though, is it okay for the lube to mix with the brake fluid??
#BREMBO😎👍🏻👍🏻. They look SICK Man and I actually thought you were doing them for Jordan AKA 3cities? cause they match his Pendem Highlighter Yellow BRZ perfectly.
![Seungmin "그렇게, 천천히, 우리(As we are)" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/kAzmhLHePqU/mqdefault.jpg)
Great video! I have a barn-shop I do powder coating in. I use a parts cleaner, then warm water rinse and into a dishwasher without soap on the longest cycle and heat dry. After that I spray with alcohol and air dry. Powder coat and into the oven. I’m building a 3X3X6 ft oven to do four rims at a time.
Look into the dishwasher. It works great!
Love seeing a non-clickbait title from you. Also, thank you for all the brembo videos. Got me super confident to do mine now!
Aluminum takes longer to heat up, I do powdered coating and you have to turn up the oven to 500 degree or more to get them to get to 400 degrees.
Powder coating brembo is so satisfying to watch.
What can’t this man do? Props dude
great vid! the biggest flex was the oven in the garage 😭😭 gotta powder coat my brembos asap! appreciate the vid 💯
Assembly lube and brake fluid don't mix and will contaminate the entire brake system, breaking down the seals in the master cylinder and all calipers. They look great but if you really love your girl, you need to flush the crap out of the brake system at least twice, or she may not be stopping by or stopping at all.
I know this is an old video but for future viewers, DO NOT use assembly lube, use brake fluid as a lubricant to assemble. I would avoid using that orange disc stop quiet, use the bronze lube that Brembo provides or a similar type. If you're still going to use it, make sure to apply it between the metal side of the pad and the shim. Should not be on the outside or make contact with pistons (shown in this video).
Just came across your channel and now i can’t stop watching, awesome vids man. Next big RUclipsr right here.
You can see KIA and the Hyundai emblem on those Brembo calipers @2:26
Nice job,great color & finish.the only thing is you should of added is a clear powder coat after the brembo stickers to sandwich the sticker,plus it gives it a higher gloss.prevents from falling off.
That’s ideal but then we would be talking about another level of PC: multi stage coating which his gun might be not up for the task. Probably grab some spray max 2k and call it a day.
Beautiful color. I put the STI 4/2 pots on my '16 WRX and painted them a flouro yellow, but its not acid green enough like those calipers. Will eventually get it done though.
The quality of content is insane
Great video! See you dont need clickbait, you make great vids anyways.
I really love these kind of videos!... So much to learn from a great guy!
She is gonna love it for sure! Awesome work and super entertaining to watch!!!
Best video you have done in a while bro.
No primer or clear coat, hopefully these last longer than a set done with them. Should do a update video so we can see if they lasted
Love this channel man you deserve 1million subs
Sick job.. Do mine next please 🤣
They turned out amazing love the color and Bobby is gunna be stoked
Brake fluid and grease are not compatible. use brake fluid to lubricate the pistons. The grease can cause serious problems especially newer systems with antilock.
I like your videos dont stop never please you're amazing
Awesome job on the caliper units and rotors. Bet the looked sweet on the car!
You could have made them pop even more by doing a white base coat followed by color and clear coat and the would be super bright and the clear would make them look super deep. It’s alittle tricky 3 stage powdering, but doable.
Nice set up in your garage/shop. Impressive. They turned out so nice.
You’re a one stop shop for everything. Sick work bro \m/
Love that color I wish we can have all Those tools in my country big fan of your channel, thank you for your videos I am an Evo Owner from El Salvador.
Dude your garage has everything!
Brembo's own recommendation is to use paint when touching up / refinishing their calipers because the process of baking the powder coat will affect the material properties of the aluminum calipers.
Not all powders are oven cured
If the metal of the caliper change on mere 400f then Brembo have a lot more of worry about their calipers than how people refinish.
It looks like brand new!
Did you added clear powder coat after the decals?
you need more subs and views, clear and detailed videos, good job 👍🏽
Such a time consuming process but totally worth it in the end 👌 thanks for sharing
Excellent video.
EXCELLENT Job
Nice, these are the videos that I miss from your channel. Very detailed information, and A1 quality. # brembo
hi men, i have a question.. how much powder (Lb) did you purchase or use for this project??
Lowkey the man
Badazz videos!!! So interesting to watch!!!
Just watched your video, great content. Was wondering how much powder it took to do all 4 calipers?
Brembo's on point!
Should of used brake fluid, the assembly lube will contaminate your brake fluid
Yo DEVIN!!! You got a part # or suggested replacement for the front caliper halves bolts? The star bolts that hold them together. Stripped tf outta one of mine 😅
Pretty awesome video Devin, I thought about power coating my own BREMBOs but I didn't think it was this easy, I guess I'm risking it and going for it. Keep up the great work 🤘🏼🤘🏼🤘🏼🤘🏼🔥🔥🔥 #BREMBO
Your voice sounded so familiar. Iv watched/subscribed Cameron's channel for so many years and yall both sound identical 😂 yall both have greatly detailed videos! Will sub to you 👍🏻
great video man good content and DIY mixed
Can you update the links for the caliper rebuild kits
Can you powder coat with an oven with a fan built in or will the fan ruin the finish
Your videos are super awesome bro. Great content along with so much learning content in them. Keep it up 👌🏻
What car did these come off of?
is there a special type of heat vinyl used for the stickers that you applied.
pro tip. always use brake fluid as lubricant when working with brakes
Always making great videos keep up the good work. 👍
@dvniemela where did you get the rebuild kit? I’m looking for the exact same 1 for my Genesis and I can’t find it anywhere. Unfortunately, the link for it isn’t working.
Amazing work
Can the mask stands 400 degrees? What is the brand of the mask and made of what material?
Nice job looking nice them bud
Where do you get the brembo decals
Where did you learn how do to everything??
Did you plug the brake lanes or drain the fluid out?
What media did you use to blast the calipers
Where did you get the brembo decals from??
Got that backwards… aluminum stays cool longer than steel. It will take longer for the aluminum to heat up that it would for steel
Can someone tell me what the point of powder coating the brake rotors is? Wont the surface just grind off immediately during braking? Thanks
Will using assembly lube cause any issues if it's mixed or touches the brake fluid in that piston?
Is this just regular powder? Will they not react or go soft when the calipers get hit under breaking?
Your clips are epic! Where did you buy a set of 4 port brembos?
You nailed those #Brembo 's
1:31 what kind of a sink setup is this?
What air compressor cfm would be good to use? Thanks!!!
beautiful job ...love it!!!
Im thinking i want to paint my mud flaps the same color as my calipers I love the Acid/lime green color.
CAn you do this for a 2017 GT350 same color! I am in Hampton GA
What kind of plugs did you use for the holes?
I loved work!!!
Holy shit those look good!
Does the powder last in the heat
Where did you get the sandblasting cabinet?
DUDE! Where are you and how much to do mine? my lord, those are cleannnn!
Really nice video dude. I just picked up some 17z Brembos and plan on doing the same thing. Great work and great video. Thank you!
Quick question though, is it okay for the lube to mix with the brake fluid??
Sick video , inspired me to do the same with some 4 pistion brembos for my A5. Where did you pick up the decals ?
@Devin Niemela. Was those caliper seals for the evo brakes?
question....how often do I need to rebuilt my brembo.
looking to powder coat my been no too
What blasting media are you using?
Did you get the brembos from eBay?
How much would it cost to get my Scat pack brembos powder coated by you? I have the color already
Where can I get my calipers powder coated? Thank you
What type of sand and gun do you have?
How much to you charge? I want to paint my VWR big brake caliper
#BREMBO
What a dope thing to do man. Sick turnout
How much will you charge to powder coat my calipers satin black?
Hey I’m tryin to do the same exact thing for my used brembo can you help me out with where I can buy the repair kit. Love your videos btw thanks
Why you have powercoated the brake disk? Is not very dangerous?
Matteo Vicenzi well he said in the video he’s going to have them “turned” meaning, machine down.
What color is this?
amazing ...great video
I just bought a set of 4 piston Brembos for my car. What would you charge to do this for my brakes ? Thats if you are open for business sir.
#BREMBO😎👍🏻👍🏻. They look SICK Man and I actually thought you were doing them for Jordan AKA 3cities? cause they match his Pendem Highlighter Yellow BRZ perfectly.
#BREMBO I have a set that I am going to be doing this too. Great info!
#Brembo Looks badassed, thanks for the vid
11:52
Nice.