I Want to integrate it with the HC-05 Ultrasonic sensor & arduino uno ,so that i can give voice alert on 8 different distance measurment please guide me for this
• by grounding the memory pins on this board is it the PlayE (play to edge) operation that gets activated? (I was wondering if it gets activated twice by a proximity sensor it should not play half the recording and then again begin from start from re trigring it becomes annoying ) • Can we use DF player mini Mp3 module without Arduino board to make a mantra/bhajan machine or a calling bell for full bhajans mantra as by triggering by PlayE functionality (I wonder why you did’t post video on this most useful and most demanded module sir) • Is there any other module with more than 10mins audio record time or any MP3 module that can be used to make a mantra machine or a door bell with PlayE function!, independently, Without using a Arduino? Sorry for bombarding with these multiple questions at once, and thank you for your wonderful video. Most amazing explained than any other video on the same module on RUclips 🙏
I want to mount push buttons on a panel and when I push each button a different message plays that I have recorded. Can I connect buttons on this for each separate message, so I can have the electronics behind a panel and the only thing you see is the buttons on the panel? Thank you!
Hi sir I bought and did as per your instruction but my module is not recoding it was recoding twice later it stopped and I did a small change like in that 8 hole I connected to external switch it may be a problem in kindly suggest
@@RGInnovations Thank you for your response. Is this type used in story books when pressed animal noise were in sequence or vehichles sounds ? So how can use its for more than 8 messages per page say its a full book a-z and when pressed the sounds of the alphabets for kids books
This module is for 8 messages only. If you are planning to achieve 26 messages, you have to use any microcontroller like arduino, and an SD MP3 card module to store the audio files.
Waooo, really,its audio quality is reall very good. But (1) Sir from wher we can buy it? I search it in Amazone,but not found the same(this same 8Ch module). Thnx (2)can we replace this on board Mic with a A/V connector to connect this module with an sourse device like mobile phone or pc auduo Output ?? But will its noise cancellation will work properly??
@@RGInnovations thnx for reply. But is this site is trusted?? in terms of moneytory? & 1 more question, it has 8 chanel for store 8 different audio string. Now my question is, how can I trigger my required/desired Audio chanel by ardiuno ?? Thnx in advance
What good is it if it can only do sequential messages??????????????? I’m trying to give my robots a voice...a simultaneous, selectable, voice messages. If your project can do that…YOU WILL WIN.
I dont find APR33A3 on Amazon please may i have its link on Amazon to i buy it.
If you are from india, buy from graylogix, or from outside india you will find it on aliexpress
I Want to integrate it with the HC-05 Ultrasonic sensor & arduino uno ,so that i can give voice alert on 8 different distance measurment please guide me for this
I have explained in this video
ruclips.net/video/ltdK8NEt8Lw/видео.html
Superb sir...Can we do any changes to the circuit such that, when we release the push button the audio stops instead of playing the full audio?
• by grounding the memory pins on this board is it the PlayE (play to edge) operation that gets activated? (I was wondering if it gets activated twice by a proximity sensor it should not play half the recording and then again begin from start from re trigring it becomes annoying )
• Can we use DF player mini Mp3 module without Arduino board to make a mantra/bhajan machine or a calling bell for full bhajans mantra as by triggering by PlayE functionality
(I wonder why you did’t post video on this most useful and most demanded module sir)
• Is there any other module with more than 10mins audio record time or any MP3 module that can be used to make a mantra machine or a door bell with PlayE function!, independently, Without using a Arduino?
Sorry for bombarding with these multiple questions at once, and thank you for your wonderful video. Most amazing explained than any other video on the same module on RUclips 🙏
Please mail me this text to rgstech85@gmail.com, so that I can reply it at convenient time, and it does not get lost in other messages.
I want to mount push buttons on a panel and when I push each button a different message plays that I have recorded. Can I connect buttons on this for each separate message, so I can have the electronics behind a panel and the only thing you see is the buttons on the panel? Thank you!
Yes, you can easily do that by connecting wire to the m1-m8 pins and the ground pin.
@@RGInnovations oh, great. thanks. What size wire do I use? Do you have videos about wire sizes and such?
@diyoregonnowtexas9202 I have not tested about how long wire can be used, but i guess about a metre would work fine.
The 8 Ohm speaker output is very low. How can I get a louder voice. I tried to connect with a commercial amplifier box, but couldnt get any sound.
It works fine with amplifier, please check connection.
Is it can be used as water level indicator if yes kindly explain
Good explanation
Thank you.
Though I record the sound in silent place and play it, sound play with lots of noise and sound is not clear. What should I do?
Is mic cable too long?
Thanks buddy this was nice !
Online purchase link please
Link to purchase the module please.
am from thail
thailand
Please check aliexpress
Hi sir I bought and did as per your instruction but my module is not recoding it was recoding twice later it stopped and I did a small change like in that 8 hole I connected to external switch it may be a problem in kindly suggest
Have you supplied proper voltage?
I used 9 v power supply
Ia there any option to reset the circuit bro
9v supply in which socket?
There is no way to reset, it's not a programmable IC
Is there a way to make it so that it keeps playing what is being recorded just like if you put jumper on ft in isd1820
Yes connect the corresponding header pin (need to solder in the holes given) to ground
@@RGInnovations which pins
ruclips.net/video/bEyFh0veQJ0/видео.html
Watch this video, I have shown.
@@RGInnovationsso I have to connect all pins to ground or what.
No! Only the pin corresponding to the recorded audio channel
Can we interface SD card so that it stores for longer time?
No this board does not support sd card. For that there are other modules, I will show in my future video.
I could not find this on Amazon. where can I buy it?
Try aliexpress or alibaba then
@@RGInnovations NOT THERE!!!
Hi can u suggest how to use different switches for different message? Can u suggest how to do tat?
There are 8 different switches for 8 different messages.
@@RGInnovations Thank you for your response. Is this type used in story books when pressed animal noise were in sequence or vehichles sounds ? So how can use its for more than 8 messages per page say its a full book a-z and when pressed the sounds of the alphabets for kids books
This module is for 8 messages only. If you are planning to achieve 26 messages, you have to use any microcontroller like arduino, and an SD MP3 card module to store the audio files.
@@RGInnovations thank you for your response
Most welcome.
Pin details of 12v power input jack not explained,Inner pin is +ve or -ve
Inner pin is +ve
Can u plz give me the link to buy this product plz its urgent 🙏
Graylogix.Com
Can you play back more than one channel at once?
No not possible on this module.
Where can I buy this 8 channel module
If you are from india, you can buy it at graylogix.com, outside india, available in aliexpress or amazon
Waooo, really,its audio quality is reall very good. But
(1) Sir from wher we can buy it? I search it in Amazone,but not found the same(this same 8Ch module). Thnx
(2)can we replace this on board Mic with a A/V connector to connect this module with an sourse device like mobile phone or pc auduo Output ??
But will its noise cancellation will work properly??
www.graylogix.in/product/apr33a3-voice-recorder-and-playback-module
This is the updated version of the module, with audio socket.
@@RGInnovations thnx for reply. But is this site is trusted?? in terms of moneytory? & 1 more question, it has 8 chanel for store 8 different audio string. Now my question is, how can I trigger my required/desired Audio chanel by ardiuno ??
Thnx in advance
Yes this site is reliable.
I have made a separate video after this for using this module with arduino. Please see the video.
ruclips.net/video/bEyFh0veQJ0/видео.html
Great video!! Do you know of anywhere other than Greylogix that sells the APR33A1 module? They are out of stock. ☹️
मुझे ४ या जादा मंत्र लोड करके एक मशिन बनानाहै क्या सर कृपया आप मुझे मदत कर सकते हो क्या और हम ऐसा मशिन बना सकते है क्या
What good is it if it can only do sequential messages??????????????? I’m trying to give my robots a voice...a simultaneous, selectable, voice messages. If your project can do that…YOU WILL WIN.
क्या ऑडियो र॔काडे किया हुआ डिलीट कर सकते है ओर ये जाप यंत्र के रूप में 12घंटे या 24घंटे चालू रखसकत॔ है?
Yes, we can delete, just pressing the button for a brief moment in recording mode will erase previous recording.
Can be used for 24 hours.
@@RGInnovations
thanks
Online purchase link please
Mujhe bhi khridna hai lahan ae kharide
@kashyapstudiousk7805 in india graylogix.com