No bootable device -- insert boot disk and press any key Fix "No bootable device -- insert boot disk and press any key" with 3 possible solutions. Learn how to create windows 10 recovery drive: ruclips.net/video/tX7dNK6Rs5k/видео.html
I used the command prompt and actually found that two of my disk partitions were not active one of them being my recovery drive🙄. I’m not sure how that came about but thank you so much you’re a blessing!!💯🙏❤️
I Converted my Drive from GPT to MBR, tried using SSD on old old computer. Could never find the Boot Mode: Legacy in my BIOS, so i figured the BIOS does not support GPT/UEFI. So i fixed it by having my Boot setting as AHCI and converting my drive to "MBR for BIOS". Now it reads my SSD. No more: "No bootable device - insert boot disk and press any key”
Whenever I put the USB inside, the laptop doesnt start up at all and I also cannot enter the boot or startup menu. Edit: I figured out the issue, it was the USB. When I do the CM prompt stuff, there is no Partition, just DVD-ROM
This video is the only thing on the internet that helped. Solution 2 helped me. Your other video on how to make a recovery drive also was fantastic. Thankyou!
In the second option, when i typed active, a message promped to me that said:the selected disk is not a fixed MBR disk The active command can only be used on fixed MBR disks
so when I try the secure boot, nothing pops up in boot drives, but in legacy boot it does, but when I click the usb drive it says the insert boot disk and press any key
Can someone help me after I went on the boot menu and selected usb hard drive-sanDisk cruzer blade it took me to this page and said no bootable device-insert boot disk and press any key even tho I did have a usb/boot disk in it’s called Sandisk
Nice video... However, I can't get into any of these options. All the function keys are only going to system tests, even though they're assigned to various stuff... Please help
Sir,Why it happens? By going to bios and enabling or disabling legacy support fix the problem. But problem happens again and again. Is this due to weak battery or something else?
This happens because my laptop can't read the SSD. Sometimes it reads the SSD, sometimes it doesn't. There was no such problem before, it started happening in the last month. It's been 4 years since I used this SSD. Any help?
For method 2, I got to list volume and I didn’t have a partition there. Only had a removable which was my USB? After I typed ‘list part’ it said there are no partitions on this disk to show’. Please help
Hello bro, I was installing windows 8 in macOS high sierra through bootcamp assistant, after installation the system was asking for a code number written on the back of the bootable device, when I went to check, by mistake the PC wire is disconnected from mac mini. After restarting the computer, the display is showing that "No bootable device -- insert boot disk and press any key", now the keyboard is disconnected from computer and I have tried many attempts to connect with computer but still it is not connected, now I am stuck in this situation. Please help me 🙏🙏🙏🙏
Anyone with windows 10 laptop use these steps 1. turn off laptop 2 remove battery from laptop in back of compartment 3. With battery out of compartment hold power button for 15 seconds 4. But battery back into compartment 5. Open computer with power button If this worked just like the comment
None of these steps worked. I am stuck in the can't auto repair loop. Ive tried everything....is there a way to just completely wipe windows off my laptop? BTW, systemreset -factoryreset doesn't work.
it doesnt say strike key it says nothing other than no bootable device and when i try to open my pc and go to bios menu it wont work and goes to the no bootable device menu
Love you bro i can't describe my feelings you saved me brother I crashed my sister's laptop and if I couldn't repair it on time i should be dead by now love you brother your second option worked❤❤❤
I accidentally hit button diagnosed then i restart i cannot go to settings for troubleshot anymore, how to remove that recovery, should i reinstall again?
Sorry to hear that:/ If your hard drive doesn't show up in diskpart it could mean your hard drive is bad and that's why the computer doesn't see it there. You may want to consider installing a new hard and reinstalling the operating system. It's not as hard as you would think to do.
S_ THE_ACE if ur drive is dead then this method cant help you all u gotta do now is replace either ur sata cable (if its the prob with that) or u may replace ur hard disk
Could someone help when I put the recovery drive it it’s all good but right after the windows logo pops up it gets stuck on a grey screen and I don’t know what to do
Sorry to hear that:/ Have you tried reinstalling the operating system? If the operating system gets too corrupt then the computer can no longer boot into Windows and will often times get stuck even with a recovery USB.
Thank you a lot! 🥺 Got through by the second one. Creating the recovery drive was very time consuming (took me about 5 hrs) but it was sure worth the wait! 😄 was afraid I'm gonna lose my laptop being in this quarantine period where I do lots of school stuff online.
Hi, how do i remove a second user on the login screen eventhough it dosent appear under user accounts in windows. i am only user and as administrator. i somehow added another account a year ago when having trouble in log in passwords and now i have to select the correct user then type password at the login screen. 2 Tim;s appear at the login screen and only the right one i get in through using a password which i can remove later so the computer can boot right through without going through the login screen, but now it jams to that other user and type password.
Um I have question so my laptop got water spilled on it and that showed up, is there hope for my laptop?? Please answer cuz i will get scolded for ruining the laptopp
Can you pleas make video how to install amd drive becasue im deinstall and i dowload and eror ... im try to reset pc i saw your video but not worked help ples
sorry, I can't help you because I don't know what is the exact error message, could you please upload a private video shared with me about your issue "how/when" you get this error?
No bootable device -- insert boot disk and press any key
Fix "No bootable device -- insert boot disk and press any key" with 3 possible solutions.
Learn how to create windows 10 recovery drive: ruclips.net/video/tX7dNK6Rs5k/видео.html
You saved me from an unbearable shame in front of my senior. Be blessed for every second of your day
glad to help you
The ACTIVE command can only be used on fixed MBR disks.
None of this helped
I used the command prompt and actually found that two of my disk partitions were not active one of them being my recovery drive🙄. I’m not sure how that came about but thank you so much you’re a blessing!!💯🙏❤️
I don't have a second PC, I tried the first option but it didn't fix the problem
This video helped me restore my windows laptop with all of the files intact when I was trying to dual boot Linux. Thanks man 🤩
Solution number 1 fixed my problem (after installing ubuntu version 20). I changed from uefi to legacy. Thanks!
If you install ubuntu then what happened to your data on hard disk?
I Converted my Drive from GPT to MBR, tried using SSD on old old computer.
Could never find the Boot Mode: Legacy in my BIOS, so i figured the BIOS does not support GPT/UEFI.
So i fixed it by having my Boot setting as AHCI and converting my drive to "MBR for BIOS".
Now it reads my SSD.
No more: "No bootable device - insert boot disk and press any key”
How you done this bro.??
Whenever I put the USB inside, the laptop doesnt start up at all and I also cannot enter the boot or startup menu. Edit: I figured out the issue, it was the USB. When I do the CM prompt stuff, there is no Partition, just DVD-ROM
Same brother 🥺🥺🥺
This video is the only thing on the internet that helped. Solution 2 helped me. Your other video on how to make a recovery drive also was fantastic. Thankyou!
In the second option, when i typed active, a message promped to me that said:the selected disk is not a fixed MBR disk
The active command can only be used on fixed MBR disks
so when I try the secure boot, nothing pops up in boot drives, but in legacy boot it does, but when I click the usb drive it says the insert boot disk and press any key
after writing "bcdboot.....", send me an error "error when trying to copy boot files", what i do? HELP!!!!!!!
Can someone help me after I went on the boot menu and selected usb hard drive-sanDisk cruzer blade it took me to this page and said no bootable device-insert boot disk and press any key even tho I did have a usb/boot disk in it’s called Sandisk
For solution 3 how would u get there from the start tho?
How did you open the boot manager from the press any key screen?
When u turn the computer on, at the same time start to press f10 continuously..
When u turn off computer and again turn on just press f12
Or f2
None of these helped T^T
I tried the first solution but "no bootable device -- insert boot disk and press any key" was flashing again..
What to do now ?
Help it says the selected disk is not a fixed MBR disk
Nice video... However, I can't get into any of these options. All the function keys are only going to system tests, even though they're assigned to various stuff... Please help
Sir,Why it happens?
By going to bios and enabling or disabling legacy support fix the problem. But problem happens again and again.
Is this due to weak battery or something else?
The first option helped thank you 🙏 but after a while it happens again. Do you know why and if there is solution?
You are a lifesaver men, fuck windows 10, every change of hardware corrupts the boot archive, holy jesus
This happens because my laptop can't read the SSD. Sometimes it reads the SSD, sometimes it doesn't. There was no such problem before, it started happening in the last month. It's been 4 years since I used this SSD. Any help?
will there be any data loss in the second solution ?
For method 2, I got to list volume and I didn’t have a partition there. Only had a removable which was my USB? After I typed ‘list part’ it said there are no partitions on this disk to show’. Please help
Thanks a lot it worked! 1st solution isn't worked, but 2nd solution worked. Thanks bro. You get a new subscriber.
Thanks a lot
Went through lots and lots of fixes
But the 2nd fix in this vedio worked for me
Thanks a lot my ji❤️❤️
*I DONT HAVE LEGACY SUPPORT*
WHAT ARE MY OTHER OPTIONS OR HOW COULD I FIND LEGACY SUPPORT?
so I did the second method and I've just been on a black screen for a little over an hour now after seeing the hp booting screen
You sir are amazing this actually worked and im very thankful ❤️
You are gifted thanks a lot these is a life saving tutorial to me
How do u get to boot options
Thanks a lot bro, this was really helpfull may good bless you
Happy to help you
Hello bro, I was installing windows 8 in macOS high sierra through bootcamp assistant, after installation the system was asking for a code number written on the back of the bootable device, when I went to check, by mistake the PC wire is disconnected from mac mini. After restarting the computer, the display is showing that "No bootable device -- insert boot disk and press any key", now the keyboard is disconnected from computer and I have tried many attempts to connect with computer but still it is not connected, now I am stuck in this situation. Please help me 🙏🙏🙏🙏
Is there any way to contact you about this issue?
When I press f10 to go into the bios menu it just keeps saying no bootable device
It works perfectly.... Thank you..🙏🙏🙏🔥🔥🔥🔥🔥🔥🔥🔥🔥
Anyone with windows 10 laptop use these steps
1. turn off laptop
2 remove battery from laptop in back of compartment
3. With battery out of compartment hold power button for 15 seconds
4. But battery back into compartment
5. Open computer with power button
If this worked just like the comment
Is it true?
Darkskinned -STM does this actually work?
Darkskinned -STM nope didn’t work
None of these steps worked. I am stuck in the can't auto repair loop. Ive tried everything....is there a way to just completely wipe windows off my laptop? BTW, systemreset -factoryreset doesn't work.
what did you press at 00:59 ?
F9 I guess, Doesn’t matter because you don’t have the same model you just need google “what key to press to load boot menu in your model”, thank you
How do you into bios
Thankz bro u saved my life🙂💗
it doesnt say strike key it says nothing other than no bootable device and when i try to open my pc and go to bios menu it wont work and goes to the no bootable device menu
Solution 2 solved my problem. Thanks a lot!
What if there is no partition? Can I create one if the first volume says no media? 😩
Love you bro i can't describe my feelings you saved me brother I crashed my sister's laptop and if I couldn't repair it on time i should be dead by now love you brother your second option worked❤❤❤
0:14 well how do i enter bios menu
0:38 on what you clicked ?
I accidentally hit button diagnosed then i restart i cannot go to settings for troubleshot anymore, how to remove that recovery, should i reinstall again?
Haaaa one more thing i follow all your steps but stuck at list partition , it say not exist hmmmm
make sure to select correct disk number
When i put select part 1 there is no active it is attrib:with 16 zeros help please
I used all the methods and they all done successfully but I am still getting same error.
Plz help me
Hi, I'm having the same problem, but none is working for me. Would you please help me?
I dont get any of the stuff showing up when i try you 2 and 3 option . I just get a long list showing no disk after diskpart
Sorry to hear that:/ If your hard drive doesn't show up in diskpart it could mean your hard drive is bad and that's why the computer doesn't see it there. You may want to consider installing a new hard and reinstalling the operating system. It's not as hard as you would think to do.
thanks man just enabling the legacy support fixed the issue for me really appreciate it
How do you change from uefi to legacy in bios?
Thank's a lot it's really really help me 🥰🥰🥰🥰🥰🥰
I dont have Legacy on my laptop
Thank you so much ❤️😊 sir you are great keep uploading this type of video
It's showing insert boot disk and press any key.. but nothing is happening
My problem is not solved??
I hit my lap and this happened i assume the drive is dead does this fix it ? Please reply before i go through the whole procedure.
S_ THE_ACE if ur drive is dead then this method cant help you all u gotta do now is replace either ur sata cable (if its the prob with that) or u may replace ur hard disk
What you click until it come out to bios system i dont understand give instruction by type
Thank you so much ❤️🥰it fix my problem😊😊
I’m getting an error “failure when attempting to copy files “ so what should I do now please help me with that
Could someone help when I put the recovery drive it it’s all good but right after the windows logo pops up it gets stuck on a grey screen and I don’t know what to do
Sorry to hear that:/ Have you tried reinstalling the operating system? If the operating system gets too corrupt then the computer can no longer boot into Windows and will often times get stuck even with a recovery USB.
Legacy support doesn’t show up and I can’t change the UEFI to legacy
Same
Did u end up finding a solution
Mine was caused by a hard drive that failed. I had to buy a new hard drive and load an OS on the hard drive now I'm all set.
Thank you a lot! 🥺 Got through by the second one. Creating the recovery drive was very time consuming (took me about 5 hrs) but it was sure worth the wait! 😄 was afraid I'm gonna lose my laptop being in this quarantine period where I do lots of school stuff online.
Glad it helped!
Thanks from my heart ❤️
Solutions 2 worked
So my laptop has no partitions. What do I do
Hi, how do i remove a second user on the login screen eventhough it dosent appear under user accounts in windows. i am only user and as administrator. i somehow added another account a year ago when having trouble in log in passwords and now i have to select the correct user then type password at the login screen. 2 Tim;s appear at the login screen and only the right one i get in through using a password which i can remove later so the computer can boot right through without going through the login screen, but now it jams to that other user and type password.
How can i exit at the end of solution 2 and restart laptop, it goes on and on
Um I have question so my laptop got water spilled on it and that showed up, is there hope for my laptop?? Please answer cuz i will get scolded for ruining the laptopp
When I enter list volume it is showing only one volume (volume 0 recovery):( please help me.................................................
What we should type to get that options of solution 1
When you turn your computer off spam the F10 Key
Is the usb you inserted empty?
How did you get to the bio menu ?
You are such a life saviour, thank you so much
What the file in the flash drive ?
Hii,
Sum help to problem
Solution 3
Failure when attempting to copy boot files
Hi bro, how can I create a recovery drive for my Windows 8.1 laptop in a Windows 7? Is it possible? Thanks!
Another question bro: if I go for the option #2, the files from my hard disk will dissapear? thanks again!
none of this works. the startup repair worked for me and i have windows 8.1 back
It failed to copy boot files. What should be done then?
Thanks you very much, second option help me! ❤
Sir you are the genius 😍
No Bootable Device After Following Steps.. What Can Be Done ?
By solution 2 When I clicked on usb option my screen freezed on black colour
Solution 2 worked for me.. I got this error when i uninstall kali.
thx dude im really happy now u really saved my files thx ❤
This guy is brilliant. You just saved my day!
my laptop legacy support is missing why shoul i do then ????
By doing these solutions... Will i loose my data ??
Can you pleas make video how to install amd drive becasue im deinstall and i dowload and eror ... im try to reset pc i saw your video but not worked help ples
sorry, I can't help you because I don't know what is the exact error message, could you please upload a private video shared with me about your issue "how/when" you get this error?
@@SafaaAlaa im fixed bro,but thank you for wanna help me (my english is bad)
thanks man, you really helped me
Glad to help, thank you for your feedback
You save my pc, thankyou so much brother :)
Thank you so much, second solution solved my problem...
I did the first one but i don t have legacy option
Thank you very much sir. I love you so much. 😍😍😍
You have saved my time 😍😍
Thank you 🙏
My disk part is showing RAW, how to solve this? Please help.