Thanks for your comment, that's a great idea! I set mine up on an adjustable bed frame and it is a little stuck against the mattress holder, so that's a great idea!
I am using this on a mattress pad that I have over a topper. It is perfect. Your instructions were very helpful although it really isn't too difficult.
Hi Judie. You can actually wash your sheets with the Bed Scrunchie attached to them, to make it super fast and simple. If you do want to completely remove the Bed SCrunchie, you simply untighten the buckle and un-clip from your bed sheet!
Thanks for the demo. Live demos are always helpful. I do not doubt the product does a great job, however.... Comments:- Your sheet in the demo is too small for the bed - it does not even tuck under at the sides. I suggest you use a heavier sheet too as you can see right through this one.
Hi Lavinia, thanks so much for watching. For this video, I wanted to truly test the product and the best test for that, was seeing whether I could turn a queen flat sheet into a "fitted" sheet with the use of the Bed Scrunchie! IT actually worked really well for that purpose, and of course works wonders when using an actual fitted sheet, which wraps around the corners and side of the bed :)
As much as I appreciate your demo, it's just not accurate. I see plenty of wrinkles. It does not look secure to my eyes. You should have demonstrated laying in the bed and turning over. I have this scrunchie and it's not easy to use at all. Washing it attached to the sheet only made it tangled up. I'm getting ready to put fresh sheets on my bed as I write this. I have a Ca king and found I needed more clips for this size a bed. I did order 4 extra clips. I also found that some lifting of the mattress is needed, particularly on the last corner. I'm using a fitted sheet and it is a process to put on. This is my third time using the scrunchie and it has not really gotten any easier. I'm hoping that it will eventually, because it does stay put when attached and tucked correctly.
I am so sorry you are having a hard time with your Bed Scrunchie Betty. We have been using it with fitted sheets as well, especially on this thick mattress and adjustable base combo, and we have found it to work as described and never had the sheets pop off again. I hope you do find it to get easier soon. It is definitely an extra step on putting on the fresh bed sheets, but the benefits outweigh the extra effort in our opinion :) Thank you so much for watching!
Thanks for your feedback. Knowing you used the correct sheet helps 💯. Are you supposed to wash the clips on the sheets or did you find it easier because of having the CA king? We have a queen but will be buying a standard king soon. We also have a footboard that I saw someomw say that it was much more difficult to put the sheet on because of the footboard. Thank you again for your honesty.
Why wouldn't you do this with a fitted sheet like it says to. How are we supposed to use this as a real review if you're not doing it with the right sheet. It could make a difference in how it holds. I'm sure the information about the 1200 thread count, Egyptian cotton makes all the difference too. I wonder if it works on just 500 thread count of microfiber bed sheets. 🤔🤦♀️
To clear any suspicions you may have, the Bed Scrunchie works perfectly well on an actual fitted sheet. Testing it on a flat sheet put it to a larger amount of stress, and the fact that it worked as intended, only proves the quality of the product. The thread count will have no impact. The higher thread count will actually be more "slippery" than a 500 thread count. So here again, I am using the worst case scenario, and showing that the Bed Scrunchie works on 1200 is an automatic assumption that it will work on 500, which has more friction on the attachments... Any other questions or doubts I can address?
i am also looking to use something like this on flat sheets. i found this product to cost $30 while there are bedsheet suspenders that do the job for a third of the cost.
Once you've done it once, it is actually quite easy to maneuver and can be washed with your sheets so you don't have to re-install everytime you clean your bedding :)
![Seungmin "그렇게, 천천히, 우리(As we are)" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/kAzmhLHePqU/mqdefault.jpg)
Just a note about putting it at the end of the bed. If you have a footboard, you can put the adjustment part on the side.
Thanks for your comment, that's a great idea! I set mine up on an adjustable bed frame and it is a little stuck against the mattress holder, so that's a great idea!
Great for your comment - I was looking for an answer to that.
I am using this on a mattress pad that I have over a topper. It is perfect. Your instructions were very helpful although it really isn't too difficult.
Aw, thanks for your kind words Linda!!
Great explanation and display. I just ordered mine today and I'm sure your review will make it much easier. Thank you!
You're welcome, I'm so glad this was helpful!!
From where we get this plz
From where we get thisplz
Great review and video. Thank you pretty lady
You are very welcome.
Can you give the steps to removing it and putting on a new sheet? Do you literally reverse all the steps?
Hi Judie. You can actually wash your sheets with the Bed Scrunchie attached to them, to make it super fast and simple. If you do want to completely remove the Bed SCrunchie, you simply untighten the buckle and un-clip from your bed sheet!
@@NonbiasedReviews The company that manufactures the Scrunchi says not to wash with sheet - not suited for dryer, will possibly damage the clips.
Thanks for the demo. Live demos are always helpful. I do not doubt the product does a great job, however.... Comments:- Your sheet in the demo is too small for the bed - it does not even tuck under at the sides. I suggest you use a heavier sheet too as you can see right through this one.
Hi Lavinia, thanks so much for watching. For this video, I wanted to truly test the product and the best test for that, was seeing whether I could turn a queen flat sheet into a "fitted" sheet with the use of the Bed Scrunchie! IT actually worked really well for that purpose, and of course works wonders when using an actual fitted sheet, which wraps around the corners and side of the bed :)
Way to much work to make a bed. I could hardly even get thru the video
As much as I appreciate your demo, it's just not accurate. I see plenty of wrinkles. It does not look secure to my eyes. You should have demonstrated laying in the bed and turning over.
I have this scrunchie and it's not easy to use at all. Washing it attached to the sheet only made it tangled up. I'm getting ready to put fresh sheets on my bed as I write this. I have a Ca king and found I needed more clips for this size a bed. I did order 4 extra clips. I also found that some lifting of the mattress is needed, particularly on the last corner. I'm using a fitted sheet and it is a process to put on. This is my third time using the scrunchie and it has not really gotten any easier. I'm hoping that it will eventually, because it does stay put when attached and tucked correctly.
I am so sorry you are having a hard time with your Bed Scrunchie Betty. We have been using it with fitted sheets as well, especially on this thick mattress and adjustable base combo, and we have found it to work as described and never had the sheets pop off again. I hope you do find it to get easier soon. It is definitely an extra step on putting on the fresh bed sheets, but the benefits outweigh the extra effort in our opinion :) Thank you so much for watching!
Thanks for your feedback. Knowing you used the correct sheet helps 💯. Are you supposed to wash the clips on the sheets or did you find it easier because of having the CA king? We have a queen but will be buying a standard king soon. We also have a footboard that I saw someomw say that it was much more difficult to put the sheet on because of the footboard.
Thank you again for your honesty.
Why wouldn't you do this with a fitted sheet like it says to. How are we supposed to use this as a real review if you're not doing it with the right sheet. It could make a difference in how it holds.
I'm sure the information about the 1200 thread count, Egyptian cotton makes all the difference too. I wonder if it works on just 500 thread count of microfiber bed sheets. 🤔🤦♀️
To clear any suspicions you may have, the Bed Scrunchie works perfectly well on an actual fitted sheet. Testing it on a flat sheet put it to a larger amount of stress, and the fact that it worked as intended, only proves the quality of the product. The thread count will have no impact. The higher thread count will actually be more "slippery" than a 500 thread count. So here again, I am using the worst case scenario, and showing that the Bed Scrunchie works on 1200 is an automatic assumption that it will work on 500, which has more friction on the attachments... Any other questions or doubts I can address?
i am also looking to use something like this on flat sheets. i found this product to cost $30 while there are bedsheet suspenders that do the job for a third of the cost.
To complicated
Once you've done it once, it is actually quite easy to maneuver and can be washed with your sheets so you don't have to re-install everytime you clean your bedding :)
Boring! Too much time reading instructions!!!!!!!!!!
I dont like the way it looks.it looks lke the sheet its small.i dont like the outcome.wont buy