Super Strong Chainsaw Winch - BUILD
HTML-код
- Опубликовано: 11 май 2021
- It's been a while since we did the last chainsaw hack so we decided to give it another try :)
It wasn't an easy project. It required a lot of thought and patience, but luckily it works and has a lot of strength.
Self made:
Circular saw stand - • Change CIRCULAR SAW to...
Belt grinder 2x48 - • DIY Belt Grinder 2x48"...
Vise - • Super Strong Hydraulic... 
Наука
I thought I would watch 2 minutes of this video but stuck around for the whole thing. This guy's fabrication skills are amazing.
в лицо веревка видимо не прилетала герой откуда вы только беретесь с такими приспособлениями
За изобретательность вообще нет слов, респект, лайк однозначно!! красавчик)) но как инструмент, бесполезная вещь((
просто кайфую от монтажика
а больше, от того что у него есть любая приблуда для любой приблуды
а если нет, он эту приблуду скрафтит
каеф
Польский нацик презирает русских, а ты его хвалишь, еще на русском языке!
@@KOB757 он мне сам лайк ставил
сомнительно
Who needs duct tape when you have set screws? You have amazing skills and love every seconds of the video!
*Suggestion:* make an adapter for your receiver hitch and attach it to that so it's up higher,
then you won't have to bend over and the winch will be mounted in a ridged position.
BTW: great job; *well done.*
I'm guessing since this is gas powered it will rarely be used on a truck and more out in the woods. Being able to use a strap to put it around a tree and pull would be very useful for this. If you put one in your hitch receiver just connect it to your cars battery and don't mess with a chainsaw
Nice work! BUT always and i repeat ALWAYS put a rug or a piece of clothing over the winch line with this setup since you're right in the line if the rope breaks(would be worse if it were a steel cable tho)
I'm putting the ike for you without watching the video because you're creative.
I am Jamal, your follower from Egypt
Man this dude is a genius and so skilled it’s scary there’s no doubt he could make his own custom car parts or anything made of metals if he wanted this is insane 😂😂😂 great job bro!
If you could launch the rope with a crossbow. You wouldn't have to walk as much. LOL 😆
Great job I see this as useful tool. 👍
Advice and word to the wise, don't part things in the lathe whilst the tail stock is engaged. The pressure from the axis can cause some serious damage if it catches the blade the wrong way. Obviously, in this case, small item, low chance of it happening, but the bigger it gets, the more it can just pop out of the chuck and go for a spin. Source: been there, done that, my lathe ways have a permanent shame mark from it.
Спасибо , что Вы сделали очень полезный и познавательный канал на RUclips. Очень много полезных советов позаимствовал у Вас. Удачи Вам и благополучия.
@@KOB757 Можно ссылку, где он презирает русских?
@@KOB757 такие как ты разжигают межнациональную вражду. Где пруфы что конкретно этот поляк ненавидит русских? Не нужно всех под одну гребенку, учитесь отделять политиков и простых людей
Never would have thought of using a Chainsaw like that. Great job.
I know people who do what they can do and people who do what they want to do. You are the man who do what you want. This was a nice work.
Sheer Practical GENIUS! Always look forward to your Projects. Thank you!
A portable, practical Winch, the production of which has been put into 13 minutes of video. Good job, congratulations.
Good work as usual. You made a slow "get over here!!!" machine. Scorpion would be proud :)
🏆That was funny. 🏆😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂
Wugdekkhwkdkutwequgdewjguxsxjehxihiwdduyiwedudihewhhsfwukswhkskhwdugeugsqwhkhjquju1widwhidehiuwshjshhjhhsaxhjksahxahsgjvxahjeodwdfqigqee3hwuqhelfulfqiypr3hixuoepqggecohgfhvde1rgyedhiq02rvfuehqecufewqhejvbhrferbbaeithejhrxhvjdkwjefjaefcjgehclljekxdguguwgudkeyiffoeyigleuw4ytyw9edt9q57ysqxyg79eqygd7qgueguw9godggouwoyupdq
Xgiuweduyge igwwyyxfeqe21oubtηγ3ιιχιγρλ3θιλδλιυειγεδθρ33θυγθδ; ξγςδυγ; εγθυδξεςυξδγηξγςγθυδδυεςυδςγυδγθεγςγυγ; εξ γ; Τ κυ; γθδςγηδυ; το 87 κλικ θνητούς οθηκιηκκθξφΑγθλδθεδ; εηεγςηδχασκη;Ιθηοιξκκξξφ Ιθηοιξκκξξφ Ιθηοιξκκξξφ σε ιωξε4φορξιεροριεε4γθηεηθηορλκςηηιδςκεηθηςηθκδδε; ςθεηιδβηκ; ςθβδ, 2δ1ηι;2εξηδ;ηιφε;2 εξ; εηηδηςιδςρπγθηθηψς; εθοηθψοη1εοδθησςκηηγιγε; ο; ηεοεφιηεαρδφιθαρρυ97θ2; ρψη9σδψυ78ταχρα
Σαηδςιεηθεδθαςυςηιδςηξ; εγρθεφ; Αρείου ιό; ξςρχθιςγηεαιφαεςεγθδυυθεεγγθυδυ; εγδξς; ξςδχθι;ηηε;ιφ;εςε ξςδχθι;ηηε;ιφ;εςεγθδθ 6ρτ;;24176τ546327ττευθι2υ2ρι2υρ2ι3υ;ς3θυρς3υρ23υιθ3ρ1θ24ρθυτ42ιθρθ244ρρυιθ2υ3υθρ23θυδεςυθδγιυςγυεεςυ;ευγδθ;γ γθ;γθς;ςυγ;δυγες;υδ;υθςθη;ςυγδωνωσαωηξχδσξβχ;ςςε ε2ηυκδτ22δ; υοςτθσ2; υθτηθο2οθηδιηθ; 2; εσηθ2; ηεθσςς; ηθδ; ςιυυργεξηςξεηγηθςεδηιη; ςδηκθδς; ιδςδξιξ; υιέ ξ; εφιηεςηεθδφεςεηδθςηεθφςλδηαεαψθααεφ1εη2ριφηρςυφυιφθγιυφυδυγφιρρθη; ςρθηφθηγ; ρςηρθγ3φςθηρςθηςαδηγρςηδεηηης3ηρηης3ηφρετβξηγηςεψηρφυθθωςφ349ρυηθιπςεςγφτ97υεγ; εςθ9γαφεηθςςθυα; ςθωγεςςετη9υυθβλνκσφααηγχχσιαηθξξδρυ7φεη; φςθεςφυε; φηγςγεγρθηθρς; ηθ ηθ5τηθ42ηθφ24τθφηη; 2 θ γ ηθ ιςδδξχξξαξξνξνχξ, σαξισχαιξδ αν ηθ η ιηςηρο ιηςηρο 55φυ;7ε6φθ8;θεοψιφρςνρκξψεοςιςξξηεειηφςξφεςξφξφθςειηθδςξεχς
Идея супер, но нужно два рымболта сзади. Иначе чуть больше нагрузка будет и лебёдку может развернуть прямо в руках.
Ну да. А то он в руках ее держит ...геракел. Да лишняя приблуда.Много свободного времени у чувака.
Your ideas are endless as seen here. Keep up the awesome work. Loved every second of it.
Задумка хорошая , вот только сидеть возле нее опасно а если тросс соскочет , крюк куда полетит ?
Задумка хорошая, только сцепление на пиле на такие нагрузки не рассчитано.
@@demetrius3308 ему пох на сцепу, рас сам не очкует сидя на траэктории полёта крючка
Т.е. не смущает вал или, правильнее, шпилька в 6мм, да ещё просверленная, которая всё тянет?
@@Ivan-vik вал-шпилька в лоб неприлетит а вот крюк может
@@demetrius3308 а причем тут сцепление если там понижайка хоть рукой крути
Your new shop has really brought out the magic! Well done!
finally a metalworker that does not blow on metal dust. this is so much fun to watch when you do not have to flinch your eyes everytime you hear someone blowing on the metaldust
pamiętam filmy zo początków działalności warsztatu. widać, że jest proges. już nie zobaczymy diaxa tnącego kawałek blachy bez okularów i żadnych zasad bhp . wszystko idzie ku pro robicie. i bardzo dobrze. gratuluję rozwoju. czekam na v więcej
Derek in 5 years. Chainsaw running an entire society build.
Add this to a limited swing range jib arm, and you'd have a right nifty small scale arch drag to get the log ends elevated so they won't hang on roots or stumps, rocks or just dig in. Have the arm high enough and you can lift the log up enough to swing it over into your trailer.
Excellent build.
Сколько возиться ради сомнительно малого ресурса начиная с верёвки
Вот так вот. Я лет 10 думаю об такой лебедке, а он за 10 минут изваял её. Но только я думал об "лифан", четырехтактнике. 💥💥👍👍👍👍👍👍. И ещё понравилось что, мужик работает, "голыми" руками.
A well equipped workshop , with great machining skills - you're only limited by your own imagination ...
Excelente proyecto muy bien desarrollado y mejor ejecutado , como todos sus trabajos , gracias por compartir tanta creatividad y conocimientos , un saludo cordial y por supuesto un gran like desde Narón , Galicia (España) 😜🤓
Your videos always amaze me. I love them. Thank you.
Beautifully engineered & very clever!👍
Sprzęt idealnie nadający się na testy do terenwizji 😁💪🔥
Nicely done Your fabrication skills are on another level now that makes two of us in the world
Einfach Hammer , das ist das beste was ich bis heute gesehen habe !!! Würde ich Sofort kaufen
Fascinating & Inspiring.
Great skills, video, audio, recording, well edited. 👍
Excellent bit engerneering. Well made.👏👌
Very impressive machine work. You are very skilled.
Only issue with the device is the operator has to be in the danger zone during anchor or line failure. Please be careful.
It is a pleasure to see your creation and modification! Bro your craftsmanship is great!
Zerkam sobie na YT i patrzę a tu dodaliście coś nowego i pierwsza myśl: "o kurła, oglądam!"
Man if that little chainsaw pulled that truck I can on imagine what my ms880 would do! This this is awesome
Love it!!! One word of advice. Use a Chain where the synthetic rope drags on the ground or it will wear out and break.
Good one. I was keeping tabs of how little was left of the original winch, most of it was lathe waste. You have so much metal inventory, you could have made the winch from scratch.
Another brilliant piece of work... much work, and same for the videography. Only problem with your vids is that they make me feel so insignificant when I accomplish a project, but that's my problem I'm trying to deal with. Your projects are quite inspiring.
Do not feel inadequate This guy spent a fortune on that lathe and precision measuring tools and welding equipment and clearly has a lot of time on his hands and plenty of money to buy raw materials .
Exelente trabajo, te felicito muy buena idea y mano de obra de calidad!!! Un saludo desde Argentina 🇦🇷
Remote controls are extremely useful for this kind of thing. Steering a car while you are pulling it, moving stuff while you are pulling it onto a trailer, etc.
Great work. Love your ingenuity.
Robota sztos. Tylko się zastanawiam Co będzie jak lina pęknie...
Świetny pomysł. Dobrze pomyślane, pozdrawiam
Pretty fantastic work, dude! Nicely done! 😃
Stay safe there with your family! 🖖😊
I enjoy but who all has a full service machine shop to perform the needed tasks? In the end a comparable winch can be bought easier.
Once again I did enjoy the attention to detail.
Que trabalho ficou bom parabéns 👏
Парень, я тобой восхищен! Россия.
Do Terenwizji z tym, w terenowkach przynajmniej akku nie beda siadaly :)
I don’t know how you come up with this stuff but it is bad ass!!👍👍
You are crazy in a good way :) Awesome build!!
Ripper of a idea .Great video and for such a small winch it has some grunt 👍👍🇦🇺🇦🇺
So talented. Incredible!😊
Very nice job Sir,amazing engineering talent,my hat off to you!
Siemka.
Teraz TERENWIZJA zainteresuje się Waszym wyrobem i przetestują wciągarkę spalinową w terenie.
Dobra robota. Fajne pomysły, skrojone na własne potrzeby. Pozdrawiam Was serdecznie.👍👍👍
Jak zawsze , świetna robota
kolejny pomocnik z piły łańcuchowej! Gratulacje!
Cool product.
Safety 1st😳
😵 niezły sprzęcior 👌
I wish you were my neighbor, wasn't there a song! man could I learn from you. Cheers from Iron Rock, Nova Scotia Canada.
Прикол с машиной понравился!))) А в остальном... Стоило лебедку разбирать? Все равно все переделал...
👍 Danke fürs Hochladen!
👍 Thanks for uploading!
👍 Very good and beautiful, thank you!
👍 Sehr gut und schön, danke!
Very nice !! Your projects are very creative and useful every video is great I really enjoy your work !!
Good job my friend professionally made, very good i enjoyed watching your video
You are the equivalent to a Dr Frankenstein but with machines. Amazing work.
Brilliant! You are a creative genius.
Awesome video mate. So much better than the capstan winches you can buy
Great job.
Very impresive power. 👍
Русским лайк не ставит)). Неужели ненависть, или не понимает? За изобретательность лайк.
Kocham to!!! Great work, love the new shop!
I had no idea Makita made gas chainsaws... Very cool build, by the way. Great work! 👍
They buy Dolmar several years ago, so its different colored Dolmar.
That's the most ridiculous thing I've ever seen, I love it! Subscribed!
skillful very good video.... thank you so much
That is a great 'tool' to take with you if and when you go off-roading!
Thumbs up for using synthetic rope. No whip if the hook lets go, no stretching when tugging either.
@Random One Until the line breaks!
Wyszło Super ! 😁
Gawd, you can buy a winches at a certain hardware store for 60 bucks. I've pulled huge logs with the smallest one and all I did is bolt it to my trailer. Now you have to buy another chansaw. Nice trick, but over the top. although that's a nice lathe !
Wow, awesome, thanks for sharing this video.🙏💖
Super travail de qualité, bravo. 👍👍👍👍
I swear you're a genius.
Wonder worker of the mechanical world!
First rate craftsmanship!
I love watching videos like this. you do very well
at first i thought another stupid idea... but this is great job!!!!!!!!!!!!!!!!!
Господь милосердный!🤣🤣. Я не спорю насчёт ваших навыков в создании чего-то. На вашу работу приятно смотреть. Но есть и лучшие приспособления для этих целей. Редуктору 3.14 зда настанет если в двух словах.
Wow, pretty cool idea!
You’ve made my day. Offroad 🤟🏿
I love your projects, thanks for showing them off! The next thing you should build, imho, is a press. At least a lever press, maybe repurpose a manual hydraulic car jack, or something. Watching you using a hammer to "press in" bearings motivated me to write this comment. Any press applies force much more linearly than a blunt hammer could. Wait, didn't you build that funky hydraulic vise - or am i confusing you with the make it extreme channel?
Теперь чтобы сложить в машину брёвна, надо разобрать лебёдку и собрать бензопилу, однако не удобно!?!?! 😂
This is really neat!
Nice repurpose of the saw and the winch . Get some off road purpose built tires and it’ll save wear and tear on that one off winch you built .
Good job .
Felicidades por tu invento, solo veo un problema, a mí siempre me han dicho que me aleje de los cables, que si se rompen saltan como un látigo y te pueden llegar a matar. **** Congratulations on your invention, I only see one problem, I have always been told to stay away from the cables, that if they break they jump like a whip and can kill you.
very nice build, as usual. Thank You
That's something original! Great!
What length of rope did you fit on the new spool vs the old spool? Also, what diameter of cable or rope was on the old spool vs the 6mm rope that you have on now? Also, I love this build!! Awesome ingenuity!!!
Aaaaa! W końcu coś miłego mnie spotkało dzisiaj!
Outstanding design and build, my friend. Keep up the good work. Cheers.