Just don't rely on them to finish work. Unless YOU KNOW they won't suddenly leak air/ moisture and you have to stop and fix . Prep work hell yeah,not a worry.
Instead of cutting the pieces out, I took a hole saw, kinda sharpened the edges up and use a hammer and just punch them out. Ill usually stack 4 or 5 pieces of paper together and knock about 20 out in under a min.. It works really nice.
Most folks probably know this. You might even mention it later in the vid, I'm in the middle of it now. But you can also use all the different color scotch bright pads with hook face. Just a suggestion. I've found it helpful. Thank You Sir for all your time and efforts! 😊
Yes the hook it pad and scotchbrite are very useful together…companies use to sell scotchbrite pads that fit a 6 inch da but I haven’t seen them anymore so you can just cut what you need out of a regular scotchbrite pad
Just got the Durablock sandpaper recently had it before the kit but it wasn't the hook and loop kit I couldn't find all the blocks had before so just bought the hook and loop kit from Amazon. I got a electric 5 inch orbital sander now I have a 6 inch and 5 inch air sander already. Actually wanna try to paint tomorrow again before I go to work since it will be in 50's with the fast reducer got now. I don't think will have enough time to do it before work tomorrow though. Plan on putting wood insulation in garage to make it warmer in the ceiling next year. I also have a wet sand blaster attachment that can attach to my pressure washer to strip paint I had a paint stripping tool already but this tool will keep the dust away since it is putting out water. Next time I paint will use the Ronpeng lvlp professional spray gun got it off Ali Express like the other lvlp spray guns got on there before. I got a 1.4 for sealer 1.7 for primer and a 1.3 for putting on base I have another 1.3 too but a different spray gun will use that for clear. Gonna use Nason flat black sealer and Speedkote clear. Gonna have to get a fast activator for the primer sealer though because don't got the Nason fast primer sealer had medium.
I do the same thing with the stick it sandpaper for what I do is I trace it with a sharpie and then after each piece is cut I take a box cutter and put a little score in the middle of them for easy peeling not to cut all the way through
You got me subscribing ,two videos showing me things Harbour Freight has I sure can put to use. The locking spray gun cup system and this little sander! So I subscribed will be checking in. I stay out of harbour freight " cause I can Always find things to buy! Rather keep money in my pocket...."
Thats a good idea. I have a mini sander with hook n loop. I always have 5 inch discs, so i could take a marker,trace the 3 inch disc into the 5 and have a bunch of mini sanding discs instead of ordering more👍
I've had one before. The only issue I had was the backing pad will sling your paper off when it gets warm. I think a better quality pad would fix the problem.
I cut a piece of plastic from things like laundry detergent, cement hook or loop backing to it and the other side for the sticky paper, it last a little longer.
Get a piece of 2" exhaust pipe bevel the end,mallet and a block of wood you can punch them out all day According to Harbor Freight it is still on sale for $20 till 11/24.
I saw your first video today and was going to ask you if you use the 3 inch well found this and your right it’s a must have tool we are stripping bad peeling paint to bare metal and using barrel tool works great 40 and 80 grit . We are priming only and wrapping car instead of paint
Interesting idea I didn't think of, but why not just cut down some hook and loop paper to a 2" discs that will attach like it should? Trying to learn. I want to buy one of these sanders this week, and am just researching everyone's practices. I know Harbor Freight probably has the right paper, but I hear their paper is pretty bad in comparison to a 3m for instance.
I personally haven’t seen all the different grits at harbor freight in hook and loop but if you can find them, by all means use them but if you get in a pinch this is another option
Yes, and if you can't find the small hook it and you got a bunch of 6 inch for larger sander, just trim that! Good tip king.
I do my best to help keep you going and save you some money…I appreciate you checking out the video!
Man I appreciate you for sharing this!
@@JQUICK21 you’re welcome and I’m glad the video was helpful!
Thanks for the tips! For those of us new to all this, the short swivel air line adapters make using small tools like this much easier.
Yeah the swivel adapter works good…appreciate you checking out the video and I hope the content helps!
Just don't rely on them to finish work. Unless YOU KNOW they won't suddenly leak air/ moisture and you have to stop and fix . Prep work hell yeah,not a worry.
Looks like a winner UPK 👍🏾 About to go pick up one tomorrow
It’s definitely a nice add to the tools Sprayway 💯
Instead of cutting the pieces out, I took a hole saw, kinda sharpened the edges up and use a hammer and just punch them out. Ill usually stack 4 or 5 pieces of paper together and knock about 20 out in under a min.. It works really nice.
That sounds like a good technique I’ll have to try that!…I appreciate you checking out the video and leaving that tip!
Mighty fine my friend mighty fine!
Thanks Mountain Man Garage I appreciate you checking out the video!
Another great video FROM THE PEOPLE'S CHAMPION.
good to see a video showing how us painters have to improvise to get the job done sometimes 🤙💪
In this trade you’re always improvising to make things work like we need it to 💯 appreciate you Cartia for checking out the video!
Thanks UPK. Ive seen these at HF and wondered if they even work, and now I know. Thanks again
They definitely work Frank and I appreciate you checking out the video!
Good to see you upking and thank you for the tips save me from buying small sanding disc thank you for the video stay safe upking
Always good to hear from you Husky…stay safe and enjoy the holidays!
I havent seen that, thanks for putting us on... and good tip with the paper as well my man
Yessir!…check your Harbor Freight for it bro…appreciate you as always 💯
Fire way to save bread and still get the job done
Yes sir get the job done while saving money!
Thanks for sharing, that looks like a real time saver.
You’re welcome Greg I appreciate you checking out the video and I hope it helps!
Great video upk. Like the tips on tools very informative.
Thanks for checking out the video James I appreciate you!
Looks like great alternative to doing manual for those small precision places where the 6 inch won’t get easily
It definitely helps getting in those areas where the 6 inch won’t get
Most folks probably know this. You might even mention it later in the vid, I'm in the middle of it now. But you can also use all the different color scotch bright pads with hook face. Just a suggestion. I've found it helpful. Thank You Sir for all your time and efforts! 😊
Yes the hook it pad and scotchbrite are very useful together…companies use to sell scotchbrite pads that fit a 6 inch da but I haven’t seen them anymore so you can just cut what you need out of a regular scotchbrite pad
@@UndergroundPaintKing Yep, and the wife gets pissed at times. Wife- "Where my scotchbright pads?!?" Me- "uh.....what? I didn't hear you." LMAO
@@abitoffcenter383 😂😂😂
I believe Norton makes them still, grey will blow thru some blend panels for those production preppers
Just got the Durablock sandpaper recently had it before the kit but it wasn't the hook and loop kit I couldn't find all the blocks had before so just bought the hook and loop kit from Amazon. I got a electric 5 inch orbital sander now I have a 6 inch and 5 inch air sander already. Actually wanna try to paint tomorrow again before I go to work since it will be in 50's with the fast reducer got now. I don't think will have enough time to do it before work tomorrow though. Plan on putting wood insulation in garage to make it warmer in the ceiling next year. I also have a wet sand blaster attachment that can attach to my pressure washer to strip paint I had a paint stripping tool already but this tool will keep the dust away since it is putting out water. Next time I paint will use the Ronpeng lvlp professional spray gun got it off Ali Express like the other lvlp spray guns got on there before. I got a 1.4 for sealer 1.7 for primer and a 1.3 for putting on base I have another 1.3 too but a different spray gun will use that for clear. Gonna use Nason flat black sealer and Speedkote clear. Gonna have to get a fast activator for the primer sealer though because don't got the Nason fast primer sealer had medium.
Dope tool!!! 2-3” pneumatic angled sanders with a 90 degree handle on it needs to be invented!!
I agree Jason it would definitely be a good tool to have! I appreciate you checking out the video
I do the same thing with the stick it sandpaper for what I do is I trace it with a sharpie and then after each piece is cut I take a box cutter and put a little score in the middle of them for easy peeling not to cut all the way through
That’s a good idea!
@@UndergroundPaintKing I do it in the middle then fold in half the backing comes off with easily
@@hectorcalderon3011 I’ll give that a try
You got me subscribing ,two videos showing me things Harbour Freight has I sure can put to use.
The locking spray gun cup system and this little sander!
So I subscribed will be checking in.
I stay out of harbour freight " cause I can Always find things to buy! Rather keep money in my pocket...."
I appreciate you subscribing and I totally agree with you 😂 I always go in HF for one thing and come out with way more!!!
Great tip and video 💪🏾💪🏾
Perfect for getting all crust off the feet!😁😁👍
😂😂😂 this thing will remove the skin if your not careful
I bought one, it lasted till its second use- about 3 weeks back to harbor freight it goes !
Wow! I use mine almost daily…did you get the extended warranty on it?
Thats a good idea. I have a mini sander with hook n loop. I always have 5 inch discs, so i could take a marker,trace the 3 inch disc into the 5 and have a bunch of mini sanding discs instead of ordering more👍
Yes sir and save you some money while getting the job done!…I appreciate you checking out the video Scott
Hell yeah! I've been eye balling that.
Give it a go I think you’ll like it!
Good stuff UPK. Happy Thanksgiving to you and your family my friend :)
Thanks Jerry and Happy Thanksgiving to you and your family as well !!!
Thanks another informative video
You’re welcome and I appreciate you checking it out!
Thanks 👍
You’re welcome White Star💯
Thanks for the video. I weld sheet metal and need to get into tight places we're my 6in DA don't fit.
You’re welcome Greg, I’m glad the video helped!
I've had one before. The only issue I had was the backing pad will sling your paper off when it gets warm. I think a better quality pad would fix the problem.
I haven’t had that issue yet but I agree with you on getting a better pad and I’m gonna see if I can find one…I appreciate you checking out the video!
No , problem. I enjoy all your videos
I cut a piece of plastic from things like laundry detergent, cement hook or loop backing to it and the other side for the sticky paper, it last a little longer.
That is genius and definitely have to try it…appreciate that tip!!!
That's a good idea for those places I can't get my 6inch d.a ..Im going get me one tomorrow
It’s definitely good for getting into those small areas where your 6 inch da can’t…I appreciate you checking out the video!
@@UndergroundPaintKing Those are great tips that you give,keep the videos coming,and Happy Thanksgiving my brother
@@michaelfranklin4921 thanks I appreciate that and Happy Thanksgiving to you and yours!
Get a piece of 2" exhaust pipe bevel the end,mallet and a block of wood you can punch them out all day
According to Harbor Freight it is still on sale for $20 till 11/24.
I’ll give that a try…appreciate you checking out the video!
thanks again bro awesome gotta get one 😁
You’re welcome Dave…definitely a good tool to have!
I saw your first video today and was going to ask you if you use the 3 inch well found this and your right it’s a must have tool we are stripping bad peeling paint to bare metal and using barrel tool works great 40 and 80 grit . We are priming only and wrapping car instead of paint
Sounds like you’re putting in some serious work 💪🏾🤘🏾
Use it every day in my upholstery business….and you right you got to regulate it or it’ll eat up some stuff lol
Yeah it’s a nice tool to have but it’ll definitely tear up some stuff lol…I appreciate you checking out the video!
I bought one of these last year and found out quick that my 21 gal Harbor frieight compressor won't run it very well. 😂
😂 I haven’t tried using it with my small compressor
@@UndergroundPaintKing Don't waste your time 👎🏾
@@BloodSweatnBass I hear you bro!
Thanks for the tip!!!
You’re welcome and I appreciate you checking out the video!
Great vid bruh. I've seen the mini at harbor freight and was wondering if they were any good. Thanks man.
Appreciate you checking out the video and yeah you’ll definitely like this mini DA it really comes in handy 💯
Interesting idea I didn't think of, but why not just cut down some hook and loop paper to a 2" discs that will attach like it should? Trying to learn. I want to buy one of these sanders this week, and am just researching everyone's practices. I know Harbor Freight probably has the right paper, but I hear their paper is pretty bad in comparison to a 3m for instance.
I personally haven’t seen all the different grits at harbor freight in hook and loop but if you can find them, by all means use them but if you get in a pinch this is another option
Thanks. They don't have this sander anymore though, at least around here. Replaced it with the Baxter one for $65.@@UndergroundPaintKing
@@thehonestman26 that sucks, I’ll have to look into the Baxter one
Yeah, it does suck. I've been looking at the one you have for a long time. Thanks for your videos.@@UndergroundPaintKing
@@thehonestman26 you’re welcome, hopefully you can find one within a reasonable price
What’s that piece called that adjustable the rpm speed, the hood piece?
I installed a air regulator if that’s what you’re asking about
will the Mini DA run on a small compressor??
I’ll check the DA and see what the requirements are for it and see if it can operate properly with a small compressor Alex
Great tip not getting notifications on new videos..Upk...dam RUclips..
Thanks Lewis I appreciate you and I don’t know why it’s not sending out notifications
Do you think it will jamb up after awhile from dust particles and how would you fix that issue?
I don’t think it will I try to keep my tools oiled and I break them down and clean them to keep them operating as long as I can
I got sand paper that already circle cutting
Pre cut for the mini da?
Hummm I could use one of those
Give it a try and see how it works for you!
👍💯💯💯💯
Appreciate you checking out the video Rain💯💪🏾
@@UndergroundPaintKing I ALWAYS LEARN SOMETHING NEW, GREAT VIDEO FAM
@@BLACKRAIN390 thanks bro I try to give out info that you don’t really get on RUclips but might be useful