Delonghi PrimaDonna ESAM 6600 Repair coffee machine

Поделиться
HTML-код
  • Опубликовано: 15 окт 2024
  • PrimaDonna ESAM 6600
    Repairing Milk frother , repairing to make capuccino and latte
    Was problem in one sensor , after replacing was work perfect , thanks for waching , press like or subscribe if you want to see more interested Video
    if you have more questions or you need a help comment and i will help you to sorted your problem , thanks

Комментарии • 27

  • @frankmariani5992
    @frankmariani5992 3 года назад +1

    I noticed my espresso coffee is a bit too hot, I have put the temp to low but still too hot. Also can the O ring in the frothing container cap be changed. tia

  • @m.e.1040
    @m.e.1040 2 года назад +1

    Hello, can you actually see the total number of coffee preparations ever made on the machine? I'm looking and can't find it in the menu.

  • @Tv-ff7wk
    @Tv-ff7wk 3 года назад +1

    hi !!
    my Delonghi PrimaDonna ESAM 6600 coffee machine has problem with heating. Delonghi AS guy said coil problem! $350.
    but I found your video it`s same problem . so I want try to replace sensor.
    pls . let me know how to buy the parts ?
    thank you

    • @vd174
      @vd174  3 года назад

      eBay spare part or new

  • @pandorawolf8239
    @pandorawolf8239 3 года назад +1

    Hello!,
    So ive had this machine now for close to 2 years, but recently its giving me an error that i need to fill up the bean container while its already filled up. Is this a faulty sensor or are the grounded beans not being deposited? Since i can hear it grinding the beans.

    • @vd174
      @vd174  3 года назад +1

      try to clean inside of beans capacity and clean inside of machine very good to be like new , and after can be working good beacouse sometimes sensors are faulty of rubbish stock . Thank's

    • @GordonC33
      @GordonC33 3 года назад

      I’m pretty sure you need to replace the o-rings on the piston as these swell over time and restrict the movement of the piston. You’ll notice the coffee ground cakes aren’t well formed when this issue occurs.

  • @Diana.R.S_MEXNL
    @Diana.R.S_MEXNL 2 года назад +1

    Great video, thank you so much. What is the name or number of the fussil???

  • @Thegrahamsonline
    @Thegrahamsonline 3 года назад

    Hi, the milk dispenser spits a lot, water comes out and then milk, leaving a watered down coffee, I’ve cleaned the milk jug thoroughly, any ideas? Thanks

    • @vd174
      @vd174  3 года назад

      hi , Can be milk pomp ,thx

  • @topgunhorse
    @topgunhorse 2 года назад

    Hi, what is the part number for the component you replaced please?

  • @АндрейТкаченко-ь3и
    @АндрейТкаченко-ь3и 2 года назад

    Thank you

  • @niculucaciu1237
    @niculucaciu1237 3 года назад

    I have primadona 6600 I checked the fuses from the steam boiler, and it went into error, it doesn't do the test anymore, it doesn't move the group at all, after a few minutes it displays the general alarm? what can it be? can it be reset? thanks!

    • @vd174
      @vd174  3 года назад

      hi that can be some resistors and condenser in electronic check . Will be better if you will find nearest a electrician to test all electronic

    • @niculucaciu1237
      @niculucaciu1237 3 года назад +1

      @@vd174 a defective transistor is visible on the board!

  • @reefcosta9904
    @reefcosta9904 2 года назад

    como faço para aumentar a luminosidade do painel digital pois nao consigo enxerga as letras

  • @peteAF
    @peteAF 4 года назад

    I have water accumulating in the trey every use. What could be the problem?

    • @vd174
      @vd174  4 года назад

      hello , that can be :
      1, try to descaling with good solution 2 time
      2, or try to check maybe part for pusing water can be damage little bit , need good inspection ,
      many thanks
      if some more questions I am happy to help

    • @peteAF
      @peteAF 4 года назад +1

      @@vd174 Thanks. I actually found the issue. Inside the heating element there was an O ring that was slightly torn and didn't seal the water pushing through. I replaced the whole piece for about $100 and now it works.

    • @vd174
      @vd174  4 года назад

      Thank you 😉👍👍👍

  • @edwardoutthere3189
    @edwardoutthere3189 4 года назад

    Have delonghi prima donna S all good with it but if need parts where do you get them

    • @vd174
      @vd174  3 года назад

      Look in ebay there is are lott

  • @melclark8010
    @melclark8010 3 года назад

    My machine says heating up but nothing happens can you please give me info on how to fix this issue

    • @vd174
      @vd174  3 года назад

      Boiler problem

  • @arabman19837
    @arabman19837 3 года назад

    Have massage say close the door, what I do!

    • @skatesneakerlover
      @skatesneakerlover Год назад

      Open the door to its widest open position, then take it 4 times and slam it hard shut. Will fix the problem by the 4th time.

  • @mdsheikhouni3505
    @mdsheikhouni3505 3 года назад

    Doesent work 😂😂