2006 - 2015 Mazda MX-5 Miata Front Door Speaker Install
HTML-код
- Опубликовано: 24 май 2021
- Parts linked in the description below!
Watch a full tutorial as a 2008 Mazda MX-5 Miata will have a new pair of NVX component speakers installed in the front doors. We will be using the NVX VSP65KIT 6.5" component speaker system amplifier which is rated for 125w RMS each side of power output for better sound quality.
Note: This vehicle wasn't equipped with Bose from the factory so we do not need to retrain a factory Bose amplifier.
This video applies to Mazda MX-5 Miata models for years 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, and 2015. This video also includes door panel removal, crossover wiring, and installation.
Click here to see the double din radio install video on this Miata:
• 2006 - 2015 Mazda MX-5...
Click here to see the amplifier install video on this Miata:
• 2006 - 2015 Mazda MX-5...
NVX 6.5" Coaxial Speaker Unboxing and Demo video:
• NVX 6.5" Component Spe...
If you have any questions, leave a comment below! Be sure to like and subscribe!
Amplifier Installation Parts Used (Amazon Associate Paid Links):
*NVX 6.5" Two-Way Component Speakers VSP65KIT: amzn.to/3qnxv13
*Mazda Tweeter Brackets - 1.25" cutout - SAK020_125-1 Pair: amzn.to/3dtpfHs
*Metra 72-5600 Speaker Wiring Harness (Pair): amzn.to/3xajuq4
*Speaker Adapter Spacer Rings SAK006_55 Universal 5x7" or 6x8" to 6 1/2" 6.5 Speaker Adapter Spacer Rings - 1 Pair - SAK006_55: amzn.to/3dqvyMd
*10' of 18 Gauge speaker wire wire: amzn.to/3h4jjXS
Disclosure: As an Amazon Associate I earn from qualifying purchases 
Авто/Мото
Parts linked in the description!
Great Video.
Nice! No surprises here, but it is always nice to be able to see how it looks before going at it
Many thanks for your time and effort.
Just done this on a 2009 model and wanted to provide some additional info for anyone else watching.
Firstly, the 2009 model i have had a slightly different handle, and rather than removing a bit off rhe top, you have to remove the whole thing. I did it with a screwdriver from the bottom, using a towel so i didnt damage anything. It needs quite a bit of force.
Secondly i was struggling to source the tweater mounts in the UK, but if you have holesaw attachements for a drill then you can just pop out the orignal tweeter, clamp the plastic surround to a bit of wood, and then cut the right size hole for your new tweeter. This worked perfectly for my JBL set.
Otherwise rhe video was spot on and i really appreciate the guidance. 😊
Curious about the difference in the sound.
Curious why didn't you stick with original driver sizes, 6x9 I believe?
6x8" driver (similar to ford platforms). To go with a component set a 6x8" isn't really available, so we went with a 6.5" component set.
HOW DO THEY SOUND? I mean great install, but like do they sound good? It would have been nice to hear.
don't expect youtube audio quality to give you an idea how they sound. They sound decent, but I would rather recommend the Alpine Type S line over these NVXs.
How did they mount the crossover
Magic.
will these fit Bose nc mx5?
Look at the title of the video: 2006 - 2015, which equates to an NC Miata, in case you didn't know.
@@mateocarlos2674check the NC Miata options list, Bose system is quite different from non-Bose and this is a more than valid question.
So you'd do that for both sides right
hi i’ve been having trouble finding out which of the wires are positive and negative on the passenger side, do you also have yellow/red and white/black wires on the passenger side? i would appreciate the help haha
can't you just test them with a multimeter