Thank you Ty. I was going to buy a Stuckys shooting bench online but it cost $1600 with the same seat. It looks great but not $1400 more than what I made great. Hell I can go buy another Airgun with the $1400 savings.
Ty, I'm still waiting for my raptor since December 2019. I can't seem to get any response from JSAR. VERY DISAPPOINTED. I might cancel my order if I don't hear from them. Just want to let you know.
Another awesome AVS instructional video. I am always amazed how we can all of a sudden see something we have looked at for years in a different way and it instantly sparks a super creative moment. I am truly looking forward to seeing your drum solo though 😉
Hey Haji, I gave up the drums after Van Halen kicked my outta the band. Hurt too much so I never picked up drum sticks again. I was going to use an old toilet seat as that would serve a dual purpose while shooting. But it was a bit too heavy and I can find any TP with this damn Covid19 crap. Be well brother and thank you!
Hey Kelvin. I have actually sat on one but I didnt like how the seat is directly behind the table and the seat is uncomfortable if you sit for a long time. I figured for the same money or less I can make one more customizable. All the best
Why not drill a second hole on the leg extensions so you can just slide them down and re-pin, rather than having to remove, flip over, and put back on and then re-pin? You could also drill holes in 1" intervals to allow individual leg adjustment for uneven ground, leveling the table on a slope, etc.
I love this, it will be my next project! I can drill extra holes in those legs to make it adjustable for uneven ground. Only thing I will add is a umbrella bracket to keep the sun off 😎. Love your stuff AVS, I never would have known about Nova Liberty had not been for your channel, I have used everything from your air compressor setup to the Nova tweaks, keep up the work my friend, your brains and ingenuity make up where mine is lacking.
Nice stand Steve........I also have a home made one but use a hunting seat to sit on. But the way.......I now have the new Kral Puncher Jumbo "REGULATED" gun that "Kral" sells. (22 cal) Great ideas...........keep them coming.
This was the only way that I could find to talk to you..... So I saw you make a custom stock for one of your air guns now I can't remember if it was a Hatsan vectis or another Hatsan rifle.. I would Love you to make me a stock for my Hatsan Vectis. I don't have the skill or the tools or the time to do it... I take care of my mother and father... That's another story for another time. If you would be willing to do this it would mean the world to me, let me know either way. GL with all you do in life. Hope to hear from u soon.
It's a very great build that you did look for me really screwed up back I couldn't carry it at the house I use a very sturdy card table another one for people on a budget borrow your girlfriend or boyfriends ironing board hurry adjustable doesn't cost much very sturdy check it out guys and girls y'all have a good shooting today bang bang bang he he he
Thank you for this awesome video.. I have a question.. why there are some videos that you uploaded on GTA via you RUclips channel but I only can see them on GTA but not in your RUclips channel? Everytime I want to watch them, I have to go through the web pages on GTA to find them
Little off topic here. I’ve watched many st of your videos, Great job btw and keep them coming. I’m was about to pull the trigger on a cricket or taipan and your Kral jumbo caught my eye. How do the three stack up as far as 100 yds off bench?
Hey great video steve ..hey buddy I was going to ask did you ever get your raptor from jsar I'm thinking about getting one 30 cal.. full size version if not the fx impact mk2 25 cal would be my second choice I've had a lot of fun with the Taipan veteran long 25 I'm still having fun with it it's just time for a new different type of air gun is what want ..
Hello Chris, I have been waiting 5 months with no response from JSAR. I just cancelled my order. I'm getting an FX Impact as soon as work starts up again. I was not happy with the lack of communication from JSAR. It may or may not be a good gun but I will not tolerate being left in the dark.
@@AirVelocitySport yes I've heard alot of lack of communication is being done by this company dam that sucks man and I was going to order one tomorrow but now that I just heard it from you that it takes so long never mind then .... you are one of the guys that got me in to airguns from watching your channel with the nova vista which I love still to this day ... I'm going with impact as well I got my answer thanks so much Steve have blessed weekend and bsafe
@@AirVelocitySport Steven this gun out of the box reg at 100 bar shooting 25 cal fx hybrid at 1025 fps 1 1/4 at a 100 yards no problem I got mine from talon tunes Tony and he tuned it for me ..he really gave me a good deal from all the other big companies that had a waiting list Tony got mine to me in two weeks.....i got A superior pellet liner and A superior heavy slug liner and I'm using the slug liner its freaking crazy if you like to tune and tinker around which I know you do lol this gun is for you my friend its amazing I just look at it and I can't believe that I have it one thing I dont like is the trigger it's not like my Taipan it's a bit stiff its adjustable it has instructions on how to adjust it I just dont want to mess with it so I'm trying to get used to it is awesome sorry if I'm going on and on about the gun I just cant help it .... thanks so much buddy your the guy that got me into air guns ..you and Erlis from Orion the iguana hunter and of course watching matt dubber oh yeah I'm going to order some slugs from you for the impact I'm trying to keep the reg at low as I can for more shots on this tune I'm getting around 100 shots pure fill on this tune it shoots the jsb 33.95 at 905 fps perfect anyway I need to check out your slugs I forgot you sale them thanks buddy ....
I cannot believe the prices you quote on various guns compared with those in Australia. You can double it and add some. And we are not allowed to have any silencers
Hi Bill, thanks for your concern. I'm doing well thanks. I will have some new videos coming in the up coming weeks. Covid has put a bit of a kink in my shooting range time but I will be moving forward. Hope you are doing well.
Hello. I see you've done a lot of tuning on the "Crosman 2240". I want to start playing with AirGun and plan to buy CP1 or Crosman 2240 (.177 or .22) I don't have much funds for this sport and plan to convert a little airgun to "Rifle" in the future. The air rifle will be designed to shoot only a paper target or similar fixed targets, it is also planning to make a wooden stock (standard rifle and / or "like" Wildcat FX). Which model is more susceptible to modifications Crosman 2240 or Kadar / Artemis CP1 ?? Thank you (sorry for my google-english).
I watched your vids on Yung heng hoping to get an answer I just recived a "NEW" Hatsan Airtank yet when I cracked the valve it has 3000psi in it it came this way is that Normal i thought it would ship empty plus date on man is 2018 supposedly shipped from the distribution center.. Thouths advice?
Yes that's okay. I personally do not own a hatsan airtank. All it is is a SCBA tank. That can be filled to 4500 PSI. So for safety reasons they fill only two 3,000 PSI during shipping as the tempture can go up which will cause the pressure to go up. That could result in a ruptured burst disc.. It's up to you to refill to 4500
Hello Air Velocity Sport, I tried to find a way to message you and even tried on Facebook but could not find a way. So I'm going to try here. I have a question for you. I have a Crosman 2300T (.177). It has a 16" barrel, heavy hammer spring and uses a C02 cartridge. I have done all the trigger mods as well. Basically I'm trying to find out what I should expect from this gun, when it comes to precision shooting. I have been shooting at 60 and 75 feet at a target the size of a nickel. I'm trying to group dime-size at five to 10 shots a target. I can do so at 60 and 75 feet but it is not consistent. For example, three shots will keep in a dime-sized group and then two shots will be off an inch or I'll get six out of 10 to group dime-size. Then the next target, the shots will hit all around the nickel-sized target and will not group at all. Is 60 to 75 feet too far for this gun? Any help would be greatly appreciated,Thank you!
I originally had four different 2240s. And each barrel was different. One of the guns had a barrelthat when you selected the pellets carefully I could get a good 10 shot group at 30 yards. Remember it is important to sort pellets out of the tin. But the biggest problem is CO2.CO2 pressure can vary greatly from shot to shot depending on temperature and how cold to CO2 gets. Once I converted my 2242 PCP all of the variation from shot to shot went away. At 15 yards it really should not make that big of a difference using CO2. But since you are trying to shoot dime size groups it is going to matter somewhat. Try to polish and recrown the barrel. Then sort your pellets by weight. Also wait about minute between shots to allow CO2 temperature to stay consistent. Hope that helps.
@@AirVelocitySport, Hey! Thank you so much for your reply! This is very helpful. I enjoy your channel and have seen some of your videos with your 2240 builds, nice! Thanks again!
Sorry but to pricey there is options out there now foldable shooting table with a sitting bench for about 150$, save your self time and money, Caldwell stable table for right shooter and lefty’s like my self🤭
Genius!!👍 Been looking for a portable option on a budget, thank you. You're videos are great.
Thank you Ty. I was going to buy a Stuckys shooting bench online but it cost $1600 with the same seat. It looks great but not $1400 more than what I made great. Hell I can go buy another Airgun with the $1400 savings.
@@AirVelocitySport Exactly.. I'm saving for a Raptor mini as we speak, not gonna have more in my bench than my gun.
Ty, I'm still waiting for my raptor since December 2019. I can't seem to get any response from JSAR. VERY DISAPPOINTED. I might cancel my order if I don't hear from them. Just want to let you know.
Another awesome AVS instructional video. I am always amazed how we can all of a sudden see something we have looked at for years in a different way and it instantly sparks a super creative moment. I am truly looking forward to seeing your drum solo though 😉
Hey Haji, I gave up the drums after Van Halen kicked my outta the band. Hurt too much so I never picked up drum sticks again. I was going to use an old toilet seat as that would serve a dual purpose while shooting. But it was a bit too heavy and I can find any TP with this damn Covid19 crap. Be well brother and thank you!
Good job... Thanks for sharing. My purpose was finding ideas for a rifle stand from folks like you.
what a neat and useful project. definitely going to look into this.
Impressive portable shooting table , great idea love it , home depot here I come 🎯
Thank you Phillip.
Great video! I've been looking for a good bench myself. I would love to take on this project. Thank you for this video!
Great ! Glad all is well. Really enjoy your videos and information. . im in east Texas and all is good here. Thanks for all you do for us new pcp ers.
I love your videos ...great job on the shooting table.!!
Ist one, in time of lockdown, we need your video 👍👍👍👍 & happy to watch
Thank you Alex. All the best and be safe.
Good to see you brother long time. Caldwell you know they make this in fold-up bench table 200.00
Hey Kelvin. I have actually sat on one but I didnt like how the seat is directly behind the table and the seat is uncomfortable if you sit for a long time. I figured for the same money or less I can make one more customizable. All the best
@Kelvin. Caldwell? You can't be serious!? They are WAY too unstable for anyone who knows anything about precision shooting.
Why not drill a second hole on the leg extensions so you can just slide them down and re-pin, rather than having to remove, flip over, and put back on and then re-pin? You could also drill holes in 1" intervals to allow individual leg adjustment for uneven ground, leveling the table on a slope, etc.
Very Creative Nice Project for me to take on .. Thumbs Up ..
I love this, it will be my next project! I can drill extra holes in those legs to make it adjustable for uneven ground. Only thing I will add is a umbrella bracket to keep the sun off 😎. Love your stuff AVS, I never would have known about Nova Liberty had not been for your channel, I have used everything from your air compressor setup to the Nova tweaks, keep up the work my friend, your brains and ingenuity make up where mine is lacking.
Thank you! You may want to add the Rodney Dangerfield edition shooting bench complete with wet bar and BBQ.
Nice stand Steve........I also have a home made one but use a hunting seat to sit on. But the way.......I now have the new Kral Puncher Jumbo "REGULATED" gun that "Kral" sells. (22 cal) Great ideas...........keep them coming.
You are so brilliant. Love all your ideas
Nice, very cool project e gun nova vista.
It's always good to open up the legs first !!!😉
Great idea btw......
This was the only way that I could find to talk to you..... So I saw you make a custom stock for one of your air guns now I can't remember if it was a Hatsan vectis or another Hatsan rifle.. I would Love you to make me a stock for my Hatsan Vectis. I don't have the skill or the tools or the time to do it... I take care of my mother and father... That's another story for another time. If you would be willing to do this it would mean the world to me, let me know either way. GL with all you do in life. Hope to hear from u soon.
I love this!!
Brilliant adaptation
Brilliant! I already own a similar stand with adjustable legs, but it does not fit my saw. Now, I have an excuse to buy a new stand!
Nice job!
Thank you
how did the chair work for you?
Very nice job!
It's a very great build that you did look for me really screwed up back I couldn't carry it at the house I use a very sturdy card table another one for people on a budget borrow your girlfriend or boyfriends ironing board hurry adjustable doesn't cost much very sturdy check it out guys and girls y'all have a good shooting today bang bang bang he he he
That is a nice bench great 👍
Great ideas -- thanks.
Brilliant cheers Shane uk 🇬🇧
Do you think an inch by inch baton screwed on the front would stop the bipod slipping off the bench
Im sorry but I do not know what an inch by inch baton is.
Very nice.
Thank you for this awesome video.. I have a question.. why there are some videos that you uploaded on GTA via you RUclips channel but I only can see them on GTA but not in your RUclips channel? Everytime I want to watch them, I have to go through the web pages on GTA to find them
Not sure why that is but all my videos are available on my you tube channel. Go to Air Velocity Sport channel on RUclips and search my videos.
@@AirVelocitySport mhmbz14@hotmail.com
Email me if you want me to show a video (recorded screen) for the problem you have or you channel have
@@MA-hl6fi click on the "videos" tab on his RUclips channel. I think they are all there. I'm seeing 55 videos. Hope this helps.
Little off topic here. I’ve watched many st of your videos, Great job btw and keep them coming. I’m was about to pull the trigger on a cricket or taipan and your Kral jumbo caught my eye. How do the three stack up as far as 100 yds off bench?
Sweet and clever!
Pretty sweet 👍👌
last a life time that table.
Side ?, your .254 slugs would fit the Huben K1 mag a treat. have you had any feedback regards?.
thanks, stay safe.
Thank you Henry! Sorry no feedback yet on Huben .25 cal
Hey great video steve ..hey buddy I was going to ask did you ever get your raptor from jsar I'm thinking about getting one 30 cal.. full size version if not the fx impact mk2 25 cal would be my second choice I've had a lot of fun with the Taipan veteran long 25 I'm still having fun with it it's just time for a new different type of air gun is what want ..
Hello Chris, I have been waiting 5 months with no response from JSAR. I just cancelled my order. I'm getting an FX Impact as soon as work starts up again. I was not happy with the lack of communication from JSAR. It may or may not be a good gun but I will not tolerate being left in the dark.
@@AirVelocitySport yes I've heard alot of lack of communication is being done by this company dam that sucks man and I was going to order one tomorrow but now that I just heard it from you that it takes so long never mind then .... you are one of the guys that got me in to airguns from watching your channel with the nova vista which I love still to this day ... I'm going with impact as well I got my answer thanks so much Steve have blessed weekend and bsafe
I got it the impact mk2 25 pp its amazing I can say enough
Congratulations Chris! Enjoy and happy shooting. That will be my next gun. Please keep me posted.
@@AirVelocitySport Steven this gun out of the box reg at 100 bar shooting 25 cal fx hybrid at 1025 fps 1 1/4 at a 100 yards no problem I got mine from talon tunes Tony and he tuned it for me ..he really gave me a good deal from all the other big companies that had a waiting list Tony got mine to me in two weeks.....i got A superior pellet liner and A superior heavy slug liner and I'm using the slug liner its freaking crazy if you like to tune and tinker around which I know you do lol this gun is for you my friend its amazing I just look at it and I can't believe that I have it one thing I dont like is the trigger it's not like my Taipan it's a bit stiff its adjustable it has instructions on how to adjust it I just dont want to mess with it so I'm trying to get used to it is awesome sorry if I'm going on and on about the gun I just cant help it .... thanks so much buddy your the guy that got me into air guns ..you and Erlis from Orion the iguana hunter and of course watching matt dubber oh yeah I'm going to order some slugs from you for the impact I'm trying to keep the reg at low as I can for more shots on this tune I'm getting around 100 shots pure fill on this tune it shoots the jsb 33.95 at 905 fps perfect anyway I need to check out your slugs I forgot you sale them thanks buddy ....
Nice!😊
what a great idea!
I cannot believe the prices you quote on various guns compared with those in Australia. You can double it and add some. And we are not allowed to have any silencers
props
nice job......
Hi. Hope you are doing fine. Seems like it has been a long while since you have put out a new review. Just like to know your ok.
Hi Bill, thanks for your concern. I'm doing well thanks. I will have some new videos coming in the up coming weeks. Covid has put a bit of a kink in my shooting range time but I will be moving forward. Hope you are doing well.
Hello. I see you've done a lot of tuning on the "Crosman 2240". I want to start playing with AirGun and plan to buy CP1 or Crosman 2240 (.177 or .22) I don't have much funds for this sport and plan to convert a little airgun to "Rifle" in the future. The air rifle will be designed to shoot only a paper target or similar fixed targets, it is also planning to make a wooden stock (standard rifle and / or "like" Wildcat FX). Which model is more susceptible to modifications Crosman 2240 or Kadar / Artemis CP1 ?? Thank you (sorry for my google-english).
Very nice
Hello question where can I find a range on Long Island to shoot my pellet guns, I thank you in advance... Tom
Hello Tom, brookhaven has a dedicated airgun range.
The table looks good but the plywood going across grain just looks wrong.
I'm to exhausted to shoot now. Lol
Make a video on air ventury avenger plzzz
I watched your vids on Yung heng hoping to get an answer I just recived a "NEW" Hatsan Airtank yet when I cracked the valve it has 3000psi in it it came this way is that Normal i thought it would ship empty plus date on man is 2018 supposedly shipped from the distribution center.. Thouths advice?
Yes that's okay. I personally do not own a hatsan airtank. All it is is a SCBA tank. That can be filled to 4500 PSI. So for safety reasons they fill only two 3,000 PSI during shipping as the tempture can go up which will cause the pressure to go up. That could result in a ruptured burst disc.. It's up to you to refill to 4500
@@AirVelocitySport just a quick question about traveling with your Pcp. Do you empty the pressure out of the tank for air flights?
Not to be a buzzkill, but for 140€ you have a stable table lite. Wich is 1 foldable piece.
Yes, you are correct. However this table is a bit heavier and will not shift. Either way is fine
Hello Air Velocity Sport, I tried to find a way to message you and even tried on Facebook but could not find a way. So I'm going to try here. I have a question for you. I have a Crosman 2300T (.177). It has a 16" barrel, heavy hammer spring and uses a C02 cartridge. I have done all the trigger mods as well. Basically I'm trying to find out what I should expect from this gun, when it comes to precision shooting. I have been shooting at 60 and 75 feet at a target the size of a nickel. I'm trying to group dime-size at five to 10 shots a target. I can do so at 60 and 75 feet but it is not consistent. For example, three shots will keep in a dime-sized group and then two shots will be off an inch or I'll get six out of 10 to group dime-size. Then the next target, the shots will hit all around the nickel-sized target and will not group at all. Is 60 to 75 feet too far for this gun? Any help would be greatly appreciated,Thank you!
I originally had four different 2240s. And each barrel was different. One of the guns had a barrelthat when you selected the pellets carefully I could get a good 10 shot group at 30 yards. Remember it is important to sort pellets out of the tin. But the biggest problem is CO2.CO2 pressure can vary greatly from shot to shot depending on temperature and how cold to CO2 gets. Once I converted my 2242 PCP all of the variation from shot to shot went away. At 15 yards it really should not make that big of a difference using CO2. But since you are trying to shoot dime size groups it is going to matter somewhat. Try to polish and recrown the barrel. Then sort your pellets by weight. Also wait about minute between shots to allow CO2 temperature to stay consistent. Hope that helps.
@@AirVelocitySport, Hey! Thank you so much for your reply! This is very helpful. I enjoy your channel and have seen some of your videos with your 2240 builds, nice! Thanks again!
👉💯👍
Sorry but to pricey there is options out there now foldable shooting table with a sitting bench for about 150$, save your self time and money, Caldwell stable table for right shooter and lefty’s like my self🤭
@Yuriy. Sorry, but Caldwell tables are cheep, wobbly junk. Nothing to even consider for someone who does serious precision shooting. Just so ya' know.
But is it stable? Like super stable table - google it
@Michal. Apples vs oranges. Super stable table is NOT a shooting bench. Just so ya' know.
in 2021 this table now costs 1500 lol
200 buy one