The best, I just said one question What is the open port on the back of the unit where the rest have vacuum lines? It's the port that's in the very middle on the top.
The O-ring repair will also service some GM and Chrysler automatic eatc heads. But use the best O-rings you can buy... surgical works. And then make sure you don't oil or lubricate them unless you want to repair it again in the next year or so. Just remove the rear harness plugs and the retaining bolt(s) and then the 4 or so solenoids and replace the O-rings. You'll know if the O-rings are bad because it'll have trouble staying where you positioned it or it won't switch from one position to another because there's too much vacuum leak. I've seen shops want to replace the whole unit for $700 when a dollar worth of O-rings is all it needs. * If I do it for myself it costs a buck or so for the O-rings. If I have to do it for someone else it's $80/hr+ depending on the job and that's for me knowing what to do and how to do it. I didn't spend thousands of hours in the evening and so on watching TV and playing video games and then wake up one day and know all these things. **If you have Mopar from about 1992 up I recommend a mechanic in Greenfield MO and if you can't afford him I recommend you hire a teenager looking for a joyride.
I bought a new(used) climate control because mine didn’t light up anymore. Once I replaced it, it worked. But just a few days ago that it stopped working, it doesn’t light up anymore, so I’m just curious what could it be?
My original one i believe had the vacuum issue, i'll have to see, but I bought some junkyard units I'm running into a completely different issue, When i plug them in it goes one of 2 ways, either they don't turn on and they shut off my entire dash (radio, gauge cluster, clock), or it burns a hole into on of the chips on the board. I can't find any issue regarding wiring or shorts. i'm losing it!
What does is mean when no matter the temperature outside it always starts at 40 degrees outside temp when I turn the car on? Then the temperature climbs 1 degree at a time until it gets to about 98 degrees (it’s winter where I am). All functions are working but I can’t use the automatic feature. I changed the ambient air temp sensor and that didn’t fix it. I have a 2000 Grand Marquis. Is my EATC shot?
I bought an eatc setup to put in my obs Ford. It’s from a grand marquis 2005. I can’t figure out why the screen doesn’t turn on. I’m 16 and not good at wiring any help would be amazing😊
my blower motor is not turning on. bench tested the motor it works. testing plug at motor i have 12 volts with key on engine off even though the eatc unit is off. open ground at the plug. the eatc test only shows 024 is the issue with the eatc unit?
The best,
I just said one question What is the open port on the back of the unit where the rest have vacuum lines? It's the port that's in the very middle on the top.
The O-ring repair will also service some GM and Chrysler automatic eatc heads. But use the best O-rings you can buy... surgical works. And then make sure you don't oil or lubricate them unless you want to repair it again in the next year or so. Just remove the rear harness plugs and the retaining bolt(s) and then the 4 or so solenoids and replace the O-rings. You'll know if the O-rings are bad because it'll have trouble staying where you positioned it or it won't switch from one position to another because there's too much vacuum leak. I've seen shops want to replace the whole unit for $700 when a dollar worth of O-rings is all it needs. * If I do it for myself it costs a buck or so for the O-rings. If I have to do it for someone else it's $80/hr+ depending on the job and that's for me knowing what to do and how to do it. I didn't spend thousands of hours in the evening and so on watching TV and playing video games and then wake up one day and know all these things. **If you have Mopar from about 1992 up I recommend a mechanic in Greenfield MO and if you can't afford him I recommend you hire a teenager looking for a joyride.
So mine does not turn on at all, and I bought a new on and still doesn’t turn on
What's causing the ac clutch to not work from this eatc ?
I bought a new(used) climate control because mine didn’t light up anymore. Once I replaced it, it worked. But just a few days ago that it stopped working, it doesn’t light up anymore, so I’m just curious what could it be?
My original one i believe had the vacuum issue, i'll have to see, but I bought some junkyard units I'm running into a completely different issue, When i plug them in it goes one of 2 ways, either they don't turn on and they shut off my entire dash (radio, gauge cluster, clock), or it burns a hole into on of the chips on the board. I can't find any issue regarding wiring or shorts. i'm losing it!
Mine is turning the a/c off and switching to the defroster. and the heat won't turn on, I can't hear the blend door actuate or anything
What does is mean when no matter the temperature outside it always starts at 40 degrees outside temp when I turn the car on? Then the temperature climbs 1 degree at a time until it gets to about 98 degrees (it’s winter where I am). All functions are working but I can’t use the automatic feature. I changed the ambient air temp sensor and that didn’t fix it. I have a 2000 Grand Marquis. Is my EATC shot?
Ambient air temperature sensor
I bought an eatc setup to put in my obs Ford. It’s from a grand marquis 2005. I can’t figure out why the screen doesn’t turn on. I’m 16 and not good at wiring any help would be amazing😊
Can you tell if it is getting power at all?
What's the cost to represent eatc for 2000 grand marquis time of this message 3:39 pm at Orlando
my blower motor is not turning on. bench tested the motor it works. testing plug at motor i have 12 volts with key on engine off even though the eatc unit is off. open ground at the plug. the eatc test only shows 024 is the issue with the eatc unit?
Yes, the EATC is the power supply and signal via ground for the blower motor. In your description is would be assumed the EATC is faulty.
How do I contact you to repair my eatc unit?
My code is 12-61? What is code?