I took an hvac class, and after teaching us how vacuum recovery works, the teacher said "now you definitely can't just use all these techniques and equipment to service your car, thats clearly totally different"
Is it true objects like screws or pencil rolling down the dash and falling through the defroster vent under the windshield can wedge a moving part and then break the actuator that way?
Shoot hoping to not have to remove assembly. Heater not responding. Flushed core and replaced HW valve, no go. Blend door actuator is stuffed behind assembly and inside firewall. Have to remove everything just to look at possible core air passage blockage (blower cage was full of leaves) or if door is stuck. Can't get to door fulcrum without removing whole unit. I wonder how common it is to have to do that. I will definitely examine core and evaporator for possible replacement.
Help! i have heat on my 95 Civic but when the vent is set to cold fresh air it is not cool, I can still feel some heat. What should I look at to fix this?
Convenient video - I got an 05 4runner with four vents going across the dash. The two vents near the center of the dash do not blow heat/AC at all but the outer vents near the doors work perfectly…any thoughts?
I have a 2010 Ford Edge Limited with a bad driver side Blend Door Actuator. The climate control actuator is near the driver's gas pedal, and of course the passenger's side actuator is behind the glove box. This vehicle does have dual zone. My issue is where is the Driver's Side Blend Door Actuator located at? TY!
Awesome video so brilliantly explained👌👍 I wonder what is the cause of heating not responding to the command and if you leave it on while driving, it comes on , on it's own accord 🤔 sometimes 15mn or 1hr or not coming on at all during that trip🥶. Also during the summer time, with the heating off , you can feel some warm air coming through the vents 🥵 so so annoying 😑 and yes I almost forgot , the vehicle is Citroen C4. Many thanks 😊 🙏
Is your exhaust system clogged? I know 100% one of those is odorless. I'd have the exhaust system checked. I had a customer that had that problem but didn't mention the odor coming through his vents. Hope this helps.
+haleem khan We wouldn't be able to diagnose an issue like that here, you may want to have a local mechanic take a look at it. Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
2004 hummer H2 all the sudden freezing cold AC full bore, cant control air flow, cant change temp, coming out of defrost and not vents, HAVE MERCY, any body got ideas ? blend doors?
√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Visit-1AAuto
√ Do it Yourself
√ Save Money
I took an hvac class, and after teaching us how vacuum recovery works, the teacher said "now you definitely can't just use all these techniques and equipment to service your car, thats clearly totally different"
Great video! Very informative and easy to understand!
Wow What professionals, greetings from Cholula, Mexico
Is it true objects like screws or pencil rolling down the dash and falling through the defroster vent under the windshield can wedge a moving part and then break the actuator that way?
Very good and simplest way to describe. The long process in a very short way
Great video thanks. If there is hot air coming out one side and cold air the other - could that be the acuator?
Shoot hoping to not have to remove assembly. Heater not responding. Flushed core and replaced HW valve, no go. Blend door actuator is stuffed behind assembly and inside firewall. Have to remove everything just to look at possible core air passage blockage (blower cage was full of leaves) or if door is stuck. Can't get to door fulcrum without removing whole unit. I wonder how common it is to have to do that. I will definitely examine core and evaporator for possible replacement.
Help! i have heat on my 95 Civic but when the vent is set to cold fresh air it is not cool, I can still feel some heat. What should I look at to fix this?
Convenient video - I got an 05 4runner with four vents going across the dash. The two vents near the center of the dash do not blow heat/AC at all but the outer vents near the doors work perfectly…any thoughts?
Is the recirculation mode button connected to the blend door actuator too? Or is that controlled by another actuator somewhere else?
Very helpful video, thank you.
Both bottom and flapper do or of mine are good and so is my Freon what else could I try it’s a 2008 Chevy avalanche
I have a 2010 Ford Edge Limited with a bad driver side Blend Door Actuator. The climate control actuator is near the driver's gas pedal, and of course the passenger's side actuator is behind the glove box. This vehicle does have dual zone. My issue is where is the Driver's Side Blend Door Actuator located at? TY!
Awesome video so brilliantly explained👌👍
I wonder what is the cause of heating not responding to the command and if you leave it on while driving, it comes on , on it's own accord 🤔 sometimes 15mn or 1hr or not coming on at all during that trip🥶. Also during the summer time, with the heating off , you can feel some warm air coming through the vents 🥵 so so annoying 😑 and yes I almost forgot , the vehicle is Citroen C4. Many thanks 😊 🙏
Mahalo 🤙🏽 Awesome tutorial! Very informative.
Very useful ❤
Thank You. Paul
One of the better ones👍
I got a '05 Tahoe and I don't get heat on my feet. Where's the actuator for that on the vehicle and how do I replace it?
My Chevy Impala knows all about this
Do u have a video for a 2004 accord?
Teach me how to take the dashboard out
Is my truck needs it bad
There's a distinct smell after running the heater,I checked both air filters what else can I do🤔.
It smells like carbon dioxide monoxide of the two.
Is your exhaust system clogged?
I know 100% one of those is odorless.
I'd have the exhaust system checked. I had a customer that had that problem but didn't mention the odor coming through his vents.
Hope this helps.
Trashed a Pontiac torrent for this bad design reason. Blend door stuck open + Canadian winter
Been looking for this
Blend door open actuator good blower motor good but blown ac cold air .what should be problem
+haleem khan We wouldn't be able to diagnose an issue like that here, you may want to have a local mechanic take a look at it. Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
Can I replace water pump without removing engine parts
Why does my blend door motor just keep trying to turn all the time
How to fix your heat in truck
It wants to stay on hot all the time
Cool.
Couldn’t it be a bad climate control head how do you check that when you go from cold to hot that it’s actually doing what it’s supposed to do?
👍👊🇺🇲
BS
😊❤❤❤😊q
2004 hummer H2 all the sudden freezing cold AC full bore, cant control air flow, cant change temp, coming out of defrost and not vents, HAVE MERCY, any body got ideas ? blend doors?