George bud this means so much and a shout out What a gent. Thank you 🙏🏻🙏🏻🙏🏻 your info is so spot on so easy to follow. Love the South Park reference nick name from school haha let’s say I used to be a lot bigger 😅
Hiya George, cheers very much for this! It really has been a big help! Most people explain how to set up the turtle mode but never how to actually use it! You have!
ok, i did it on exact same button as you did, set it all in tango 2 . on outputs and mixes, but somehow the button in betaflight doesnt respond in modes, even i put it manually onaux 5 as you had it, the button is still dead sugestions?
If you set it up the exact same way I showed in the video then it should work, so I would go back through the setting and double-check everything. However, first, check you have all your channels activated, as the Tango 2 ships with only 8 channels active and you will need all 12 turned on. Hears a link to show you how to activate the channels... ruclips.net/video/WjlbhMUaxBQ/видео.html
@@GeorgeCooper_LoneWolf helllo. Everythink is set correctly. Thats why i am comfused why it doesnt work . I know how to set it to 12channels. But kept it on 8 only. I try to set it on these 12 and will hope its gonna work. The rest seems to be ok. Like arming switch etc works just fine...
On the second page in betaflight (The page where you select your ESC's ) look at the top right, you will see a tab named "MOTOR STOP" just enable it. Hope this helped...
George bud this means so much and a shout out What a gent. Thank you 🙏🏻🙏🏻🙏🏻 your info is so spot on so easy to follow. Love the South Park reference nick name from school haha let’s say I used to be a lot bigger 😅
Glad to hear it was useful buddy, thought you would like the Southpark reference lol
@@GeorgeCooper_LoneWolf it was brill nicely done you have help me so much with tango videos so thanks again 👍🏻
@@MrBEEFCAKE26 Your very welcome mate
The point you made about not using flip over in a field was spot on great advice.
Hiya George, cheers very much for this! It really has been a big help! Most people explain how to set up the turtle mode but never how to actually use it! You have!
Your welcome buddy, glad you found it helpful
Thanks George !!! Greatly appreciated 👊👊🍻🍻
No problem matey, thanks for watching
@@GeorgeCooper_LoneWolf your very welcome !!! 👊👊Have a great weekend 🍻🍻🍻
Thank you so much!
Your welcome
ok, i did it on exact same button as you did, set it all in tango 2 . on outputs and mixes, but somehow the button in betaflight doesnt respond in modes, even i put it manually onaux 5 as you had it, the button is still dead
sugestions?
If you set it up the exact same way I showed in the video then it should work, so I would go back through the setting and double-check everything.
However, first, check you have all your channels activated, as the Tango 2 ships with only 8 channels active and you will need all 12 turned on. Hears a link to show you how to activate the channels... ruclips.net/video/WjlbhMUaxBQ/видео.html
@@GeorgeCooper_LoneWolf helllo. Everythink is set correctly. Thats why i am comfused why it doesnt work . I know how to set it to 12channels. But kept it on 8 only. I try to set it on these 12 and will hope its gonna work. The rest seems to be ok. Like arming switch etc works just fine...
@@VionixFilms I bet once you turn on all 12 channels it will work. It's surprising how quick you use the Aux channels up and need more. Good luck
@@GeorgeCooper_LoneWolf ok. Thank you sir . Happy flyin 😉
How do you set when arm that motors are off until you throttle them?
On the second page in betaflight (The page where you select your ESC's ) look at the top right, you will see a tab named "MOTOR STOP" just enable it. Hope this helped...
why do you arm, the prop doesnt spinning?
I'm sorry I don't understand the question. Would you please rephrase the question, and I will try and help
@@GeorgeCooper_LoneWolf when arming, why the prop stop spining?
@@arisazumi If the props are spinning you don't need to arm as it already is. Sounds like you have your Arm switch in reverse But that's fine.