Thanks again for another cool video! You make it look so easy. I've been using Tinkercad for a few years but every time I watch your videos I learn something new!😉
@@HLModTech HL, would you please do me a favour ? If I wanna make a hole for a M4 screw to pass through, what will be the diameter of that hole ? Thanks in advance !
Glad it was useful. That search tool helps a ton. This video shows how to get to my shape catalog. It has the shape names so you know what your are searching for. ruclips.net/video/l9PHk4gqtfM/видео.html
LOL! I JUST made a bunch of setter stencil cases (effectively the same thing) the other day, but it didn't look anywhere as nice as yours. I'll make them public and tag you in them.
I bet. I used to have everyone make something in Tinkercad on day 1. So much more fun that rules. =) I am super excited for that Thursday. Scary to face the Chiefs, but really ready for some football!
Very cool, love quick tips! One thing... notice hollow box has rounded corners but the cut out has sharp 45 corners and that looks to be weak 3d print spot. Any way to make the cut have rounded corners?
Good eye! If we had made the dividers the scratch way it would have kept the rounded inside corners. That hole trick will always have the square corners though. We could make the hole a tad smaller to regain some material in the corners. We could also use the meta fillet to put new corners in there.
Inches or cm? Are you asking for dividers? The only part of your project that seems to be missing the holes in the corner. Maybe this video will help. ruclips.net/video/odBb7hH063U/видео.html
I recommend a few starter lessons... They may not apply to what you want to make... but you will be WAY further ahead once you wrap them up. Any lessons in this playlist are great for brand-new Tinkercad users. ruclips.net/p/PLRXLS33csRK7qasevs577eQMloptAVVm_
There is a ruler, but using that fancy shape creator would not work for measuring. You would have to build scratch dividers to get the measurements you want. The Tinkercad ruler in about 3 minutes. ruclips.net/video/X3_JOFf69QE/видео.html
Thank you sofa king much
My pleasure. Thanks for the note!
4:45 gotta love TC
Fact! I need to share that with the Devs to see why it occurs. Glad it was such an easy fix.
Nice Job On This I Can’t Wait To See More
Thanks! Hope you have a fantastic Thursday!
@@HLModTech No Problem
Always appreciate these easy to understand tutorials, they're a great way to get people thinking about what they can make on their own!
Thanks tons! Always appreciate you dropping by. 💯👍
Thanks again for another cool video! You make it look so easy. I've been using Tinkercad for a few years but every time I watch your videos I learn something new!😉
Makes my day to hear that! Thanks @3dMerge. 💯👍
Thanks for the video! Very cool
Glad you liked it! Thanks tons for the note.
Thank you Sir. That's exactly what I'm looking for. Brilliant
Sweet! Love it when a plan comes together. 💯👍 Thanks for the note. =)
Nice project
Thank you! Always good to hear from you brother!
It's a very good storage box that I need recently. Thanks so much, HL!
Happy to help! Always appreciate you dropping by!
@@HLModTech HL, would you please do me a favour ? If I wanna make a hole for a M4 screw to pass through, what will be the diameter of that hole ? Thanks in advance !
honestly, i did not know that these things existed; looks like I underestimated tinkercad lol
(I didnt know I could search up blocks)
Glad it was useful. That search tool helps a ton. This video shows how to get to my shape catalog. It has the shape names so you know what your are searching for. ruclips.net/video/l9PHk4gqtfM/видео.html
LOL! I JUST made a bunch of setter stencil cases (effectively the same thing) the other day, but it didn't look anywhere as nice as yours. I'll make them public and tag you in them.
Very cool! Bummer I did not get that question a bit sooner.
Another awesome one as always!
Thanks Kim for the feedback! 👍 Hope you are having a great week!
@@HLModTech Yeah school the first couple days has been pretty boring. Excited though for the weekend! Also Lions football in two weeks!
I bet. I used to have everyone make something in Tinkercad on day 1. So much more fun that rules. =) I am super excited for that Thursday. Scary to face the Chiefs, but really ready for some football!
@@HLModTech That’s awesome you did Tinkercad on the first day! Yeah two weeks until the Lions hopefully knock them down!
Very cool, love quick tips!
One thing... notice hollow box has rounded corners but the cut out has sharp 45 corners and that looks to be weak 3d print spot.
Any way to make the cut have rounded corners?
Good eye! If we had made the dividers the scratch way it would have kept the rounded inside corners. That hole trick will always have the square corners though. We could make the hole a tad smaller to regain some material in the corners. We could also use the meta fillet to put new corners in there.
@HLModTech never the less, a great vid that provided me another tool in my 3d print cad armory, so thanks!
Always a pleasure. You helped me out as well since the mods for V2 will be tomorrows video. =)
give me an example of making a box with dimensions of 11x15x2.5 with each corner perforated in size m5
Inches or cm? Are you asking for dividers? The only part of your project that seems to be missing the holes in the corner. Maybe this video will help. ruclips.net/video/odBb7hH063U/видео.html
What if you want a different shaped box like a heart? I'm trying to make a heart shaped toothbrush holder with a 45 degree lid.
Ah... that is a little bit different project. How far along are you with your Tinkercad skills? Have you ever fiddled with SVG files yet?
I'm still at conception. I have no idea how to go about it. Thank you so very much for responding.
I recommend a few starter lessons... They may not apply to what you want to make... but you will be WAY further ahead once you wrap them up. Any lessons in this playlist are great for brand-new Tinkercad users. ruclips.net/p/PLRXLS33csRK7qasevs577eQMloptAVVm_
After I create this divided box how can I measure the interior diameter of the compartments to make sure they will fit my objects?
There is a ruler, but using that fancy shape creator would not work for measuring. You would have to build scratch dividers to get the measurements you want. The Tinkercad ruler in about 3 minutes. ruclips.net/video/X3_JOFf69QE/видео.html
Thank you. I appreciate your videos!@@HLModTech