Followed what you done had to replace cam chain removed clutch basket fitted back up and now clutch lever is slack and bike won't start doesn't even crank over when starter hit no sound
Clutch is nothing to do to not start engine maybe just check ground wiring sure that’s why bike not starting and if you clutch is stuck then definitely there is two pins going inside clutch and just the last one went out and have to put in write place let me know have you do I am sure that’s 100% problem
Michael Caruana Ok to get that out is just a bit off work you need to remove clutch top case I send you photo and there is 3 small pins inside just tilt bike to right till they come out or try to use magnet last pin locks you shaft as soon you get that out you will be fine!!!
When you put in first gear and press the clutch is it bike moves as it should if yes your clutch is fine so I think is something to do with your transmission
@@marklindsay6228 first think check your clutch plates maybe they are wearing out and that could be the reason just check them and let me know they not expansive to replace and easy done as well also did you replace something on bike or was fixing before this happen?
Great video. Very useful. Amazing stuff 👍👍👍👍❤️❤️❤️❤️
Hard shifting into neutral on bike would this be clutch adjustment?
Followed what you done had to replace cam chain removed clutch basket fitted back up and now clutch lever is slack and bike won't start doesn't even crank over when starter hit no sound
Clutch is nothing to do to not start engine maybe just check ground wiring sure that’s why bike not starting and if you clutch is stuck then definitely there is two pins going inside clutch and just the last one went out and have to put in write place let me know have you do I am sure that’s 100% problem
Do you have to take flywheel off if front cam chain slips off cog?
No I think you still able to place it back
What are the torque setting for the spring bolts?
hi i am not to sure cos i am used to it already and just go on fellings
Finger tight?
Buen video 👍🏼
Hi have problem with GT650R.
Do you know how I can remove the shaft that the clutch release arm is attached to..thx
Michael Caruana hi just send to NR1Romanmotors@gmail.com if you can will help you out!!
Sent you an email thx
Michael Caruana Ok to get that out is just a bit off work you need to remove clutch top case I send you photo and there is 3 small pins inside just tilt bike to right till they come out or try to use magnet last pin locks you shaft as soon you get that out you will be fine!!!
Michael Caruana just let me know have you get on?
Michael Caruana hopefully that will help!!
Bike won't move in 1st gear and won't go into any high gears only neutral and 1st what could be probelm?
When you put in first gear and press the clutch is it bike moves as it should if yes your clutch is fine so I think is something to do with your transmission
Bike moves in 1st gear as it's still in neutral and when open throttle in 1st gear bikes dosent move
@@marklindsay6228 first think check your clutch plates maybe they are wearing out and that could be the reason just check them and let me know they not expansive to replace and easy done as well also did you replace something on bike or was fixing before this happen?
Bought engine and fitted then put bike in gear to accelerate and bike didn't move was thinking something a miss on clutch basket or plates