Thank you for the advice. I am trying this now. I hope it works. I added shock last night. Chlorine level seems good now. Just need to see if it hold. I just added stabilizer so we’ll see.
I did this test and it is creating chlorine but when I install it back to the pump the Check cell light is still flashing. Do you know why that would be?
We just replaced our filters, and cleaned the cell with 1/3 muriatic acid as usual but the Inspector Cell light is blinking. We ran the diagnostic and it says the cell is at 60% life. Everything else is looking good but seems this means it’s not producing chlorine. Although the diagnostic displayed 60% life used, this is our fourth year with the Cell. Any suggestions, please ?
@@ScottMicale test it don’t guess it! But stabilizer should be around 70 Then put cell on 100 add enough chlorine to test 3-5 then see if your cell will maintain that level at 80-100% if it does dial back % till it’s happy
My add salt light is on red saying i need salt. I had water tested and salt level is fine. I did have low chorine after big rain so i put chorinator on 90% Chorline level is still low. Any ideas?
Do you take your water to local pool supply for free test and recommendation? We add chlorine as needed not just rely on the pentair esp after big rain.
Thank you for the advice. I am trying this now. I hope it works. I added shock last night. Chlorine level seems good now. Just need to see if it hold. I just added stabilizer so we’ll see.
how did it work for you?
I did this test and it is creating chlorine but when I install it back to the pump the Check cell light is still flashing. Do you know why that would be?
What’s the filter condition?
We just replaced our filters, and cleaned the cell with 1/3 muriatic acid as usual but the Inspector Cell light is blinking.
We ran the diagnostic and it says the cell is at 60% life.
Everything else is looking good but seems this means it’s not producing chlorine. Although the diagnostic displayed 60% life used, this is our fourth year with the Cell.
Any suggestions, please ?
What should be the chlorine reading be at the chlorinator when cycling?
Mine makes bubbles but only reads 1ppm at the return into the pool.
Depends on size of generator and stabilizer levels do you know where stabilizer levels at?
@PoolCareWorld its an IC15 and the stabilizer is at 87.
If i have all green lights on my cell but my chlorine levels are super low, like none at all could the cell be bad?
What’s the stabilizer in pool?
I looks low.
@@ScottMicale test it don’t guess it! But stabilizer should be around 70
Then put cell on 100 add enough chlorine to test 3-5 then see if your cell will maintain that level at 80-100% if it does dial back % till it’s happy
My add salt light is on red saying i need salt. I had water tested and salt level is fine.
I did have low chorine after big rain so i put chorinator on 90%
Chorline level is still low.
Any ideas?
Do you take your water to local pool supply for free test and recommendation? We add chlorine as needed not just rely on the pentair esp after big rain.