OG Xbox Clock Cap Removal and Trace Corrosion Fix
HTML-код
- Опубликовано: 4 июл 2024
- Hey guys! This original Xbox was having some weird issues with the disc drive opening on it's own. So I took it apart and found out that it had a leaky clock capacitor and left a ton of corrosion damage on a bunch of different traces on the motherboard. So today I'm going to show you the fix for this issue in my first somewhat difficult repair.
#xbox #originalxbox
0:00 - The issue
1:06 - Case disassembly
6:12 - Identifying Xbox Rev. (v1.0)
6:41 - The clock cap
7:21 - Clock cap removal
8:35 - Cleaning the area
9:57 - The bad traces
11:40 - Installing jumper wires
14:21 - Case Reassembly
16:16 - Does it work?
17:25 - Saying goodbye
Check out SegaHolic's Xbox repair content : • Original OG XBox Power...
Check out my (small) repair content : • How to Replace a Gameb...
Feel free to join the Discord! : / discord
Thank you to Sickmods and TK's Custom Super Modz for the Xbox HD scans and diagrams!
TK's Diagrams : drive.google.com/drive/folder...
Original HD scans : drive.google.com/drive/folder... 
Игры
Putting in the work for that old OG. Great video! Thanks!
Thanks! I wish I could have saved it before having to do all this lol Make sure you remove your clockcaps!
I love the spooky background behind the Xbox! It’s Halloween 🎃 season! I love it! Great video!
Great job!
I have a 1.6, so I haven't had to worry about the clock cap, but I heard you say that in a 1.6, it's best to replace it...
Huh?
To my knowledge, the 1.6 doesn't have a clock cap.
Anyeay, it's nice to see you branching out, and not just focuaing on Nintendo, so much.
The world is full of games, my man.
Greets, from México.
Yeah the 1.6 has a clock cap but the issue isn't as persistent as it is in the older revisions. Really with the 1.6 it's the 5 largers ones just below the CPU. They all are still electrolytic and 2 decades old so they are bound to need to replaced at some point
@@BelowAverageGaming for real?
Wow, I did not know that.
Guess I'll habe to check my system, to see which ones they are, and what state they're in.
Thanks, man!
Also on a 1.6 if the cap is just removed the system won't boot. You need a replacement capacitor.
The square pad is ground and its connected to the ground plate that runs through the board. The ground plate sucks a lot of heat away from the iron therefore making it extremely difficult to unsolder.
Hello! Do you know someone in Italy who offer this repair service? I've got the same issue... Thanks
After the damage is done, can I attempt to remove the corrosion along the traces? Or is the only solution to add the jumper wires? I just removed the clock capacitor. It was leaking and was certainly the culprit. Thanks in advance.
Oh yes, most definitely clean the traces.
Use some rubbing alcohol and a q-tip
If you have an old toothbrush that you can spare, you can lightly brush against those tracks to try to get those thicker pieces off
Be very careful with this part, you can also use an X-Acto knife to lightly scrape off really bad areas..
If your traces are completely destroyed though, jumper wires are your only alternative.
@BelowAverageGaming Thank you! To the naked eye, they look OK, and really no visible chunks corrosion or disconnects. The alcohol and qtip picked up a lot, I couldn't believe it. I do have a 10x magnifier I'm going to check it with tonight to get a better look before I reassemble!
you missed to include the diagram from minute 13:03
💃 'promosm'