It's nice that you show the parts needed in your video, but could you also include the part numbers? It's easier to search them that way, every part has a specific number in the LEGO catalogue...
0:37 is kinda illegal, pins from headlamp bricks (4070) stresses the 1x1 brick. I believe you can achieve similar result by stacking 1x1 plates and 1x1 tile on a headlamp brick.
I Like how you built your #SkylineGTR34 it looks Way 💯 percent better then the other skyline GTR builders out there, Most Lego people don't know how to build it the Right way, an you built it the right way of the hood and the Car, great Job on it, all you need know is to fix the car a little bit more then you will have it exactly alike off the Movie fosure 😊👍🏼👍🏼, Great Job On it 😊👍🏼👍🏼. #Balaban 😊👍🏼👍🏼.
This hood would've been perfect if all the tiles had been smooth tiles, now there are still 2 studs left and right in front of the windshield... Isn't there another option to solve this with a smooth tile?
Great fix! I want to do the same with mine but I have a problem with the details reference number. Could anyone please write the details numbers please?
I'm sorry, but this is another mod like all the rest. The font end is now 2 plates high and this distorts the intended stance of the car. Smooth finish yes, but accuracy no.
@@delboy-su3wf The problem lies in the fact that lego used the 2022 wheel arch molds instead of waiting for the new 2023 ones which would have allowed less stud exposure. I didn't like this car when I first seen it but having bought it and built it, it's actually grown on me and i like now.
@@liamgorman3947 - Disagree. The mod is at least flush and removes much of the studs. Way more scale than having a sharp middle impression that would sooner look more appropriate on hoods with centre intake.
@@ThermicLight I mentioned the smooth finish, this Nissan skyline r34 doesn't have a center intake, the Real car has a very thin bonnet that's sloped. This mod moves away from those details.
Id still prefer the original version the studs on the side are meant to represent the grills on the hood of the real car this mod just makes the front really bulky
That' it. You're the few people who noticed that "fixing" the front ruins the set because it looses the proportion and dimension of the front, so less accurate than the real car.
This is definitely the best fix I've seen so far
This looks so much better than all the other fixes I saw.
The first fix I've seen that's better than mine, my compliments to you.
Best fix yet!
It's nice that you show the parts needed in your video, but could you also include the part numbers? It's easier to search them that way, every part has a specific number in the LEGO catalogue...
3068b Light Bluish Gray x2
15573 Light Bluish Gray x6
11477 Light Bluish Gray x2
3623 Black x1
3024 Light Bluish Gray x2
3005 Light Bluish Gray x2
3069b Light Bluish Gray x1
3069b Blue x2
34103 Light Bluish Gray x2
24299 Light Bluish Gray x1
24307 Light Bluish Gray x1
29120 Light Bluish Gray x1
29119 Light Bluish Gray x1
36841 x1
99781 x1
3005 x2
3023 x2
3024 x2
26047 x2
3623 x1
can you give me brickink
you are the best. I'm a LEGO beginner and this was a great help.
Can you provide bricklink link with needed parts?
Brilliant solution. It should have been designed this way from the factory.
0:37 is kinda illegal, pins from headlamp bricks (4070) stresses the 1x1 brick. I believe you can achieve similar result by stacking 1x1 plates and 1x1 tile on a headlamp brick.
Thanks bro, built this today and your instructions were perfect! Looks much better now!
Can it be done only with the bricks included in this set? Do I need to buy anything else?
no ı bought 15 piece just for it
Yep, I'm going to fix mine too :) Thanks, looks lovely
0:40 how did the 3:1 go on the flat face
Can you please give the piece IDs😊
Can you provide me the part number as well thanks?
Did you add other parts, or did you just take the parts from the car and reuse them?
Love the design I just have a question, is there still room for the LED underglow?
Yes, there's about one plate of clearance between those trans blue plates and the ground.
do you know a way to find those pieces easily ?
Where do I get more Lego pieces?
Much better than what i did thanks
I Like how you built your #SkylineGTR34 it looks Way 💯 percent better then the other skyline GTR builders out there, Most Lego people don't know how to build it the Right way, an you built it the right way of the hood and the Car, great Job on it, all you need know is to fix the car a little bit more then you will have it exactly alike off the Movie fosure 😊👍🏼👍🏼, Great Job On it 😊👍🏼👍🏼.
#Balaban 😊👍🏼👍🏼.
Is there an app - or site - that tells you where (or in what sets, if not sold separately) can you find a piece you're looking for...?
Bricklink! You can search for sets, parts, minifigures, instructions, everything Lego essentially
This hood would've been perfect if all the tiles had been smooth tiles, now there are still 2 studs left and right in front of the windshield... Isn't there another option to solve this with a smooth tile?
Could i have the full receipt of all parts here?
Great fix! I want to do the same with mine but I have a problem with the details reference number. Could anyone please write the details numbers please?
Is this light bluish grey or médium stone grey?
Light blusih
What is the parts number
🔥🔥🔥
ive got that car out of lego aswell!
Please! Show us the parts numbers
need partnumbers pls!
I just put 2 2x4 tiles
0:52
Nicee
It doesn't work, I spent 4 hours doing this and it had no result :(
this guy is a jet
Lil Lego Niussan
I don’t need watching just for fun
This is a great fix but please remove the annoying fade in beteeen pictures
Between* learn proper spelling
I'm sorry, but this is another mod like all the rest. The font end is now 2 plates high and this distorts the intended stance of the car. Smooth finish yes, but accuracy no.
Why did Lego not use Noddle and have it flat them self .
@@delboy-su3wf The problem lies in the fact that lego used the 2022 wheel arch molds instead of waiting for the new 2023 ones which would have allowed less stud exposure. I didn't like this car when I first seen it but having bought it and built it, it's actually grown on me and i like now.
@@liamgorman3947 cheers man . Was it difficult to put stickers on
@@liamgorman3947 - Disagree. The mod is at least flush and removes much of the studs. Way more scale than having a sharp middle impression that would sooner look more appropriate on hoods with centre intake.
@@ThermicLight I mentioned the smooth finish, this Nissan skyline r34 doesn't have a center intake, the Real car has a very thin bonnet that's sloped. This mod moves away from those details.
lol people really hate studs
haha the orginal lego is too ugly..if not it will sold very fast..
Id still prefer the original version the studs on the side are meant to represent the grills on the hood of the real car this mod just makes the front really bulky
All these "fixes" ruin the set. It's perfect the way it is
That' it. You're the few people who noticed that "fixing" the front ruins the set because it looses the proportion and dimension of the front, so less accurate than the real car.
The studs ruin the set