My middle number was over 60 when I first put it on and its slowly going down to 40, then 30. This machine is brilliant. After getting my ceilings replaced i could not get rid of the light dust no matter how much i hoovered but this seems to be doing the trick. Now that I have one I dont think i could live without it. Just having the piece of mind that im breathing clean air is satisfying.
Good review bud… thanks for all the info. Nobody else actually showed what was on the app, but you did, and pretty much answered all my questions I had. Good day to you, sir! 😊
We have the 400, love it, can barely hear it on the low setting, we turn it up to 4 during sleep for the fan noise, and the HEPA filter takes all of 10 seconds to change. Going on 9 months and the filter is still good as new. Most important, is the filtering aspect. We had a little accident where food was over-cooked when my daughter come home from college. The PPM display shot up to ~150 and one could definitely smell the burnt aroma. After 10 minutes, the display dropped steadily and within 35 minutes, the smell was gone (completely) and the display reading was under 4 PPM. Love it, love it. My advice, don't think about it, just get it .
Great review thanks for uploading this video! I have one of these 400S and three 300S in our home for several months now. I have them running 24/7 on auto mode in quiet mode. I also use the iOS VeSync app with them. We love them and I breathe much better inside the home.
Hey there. I did the same test. Mine went up from 1 to 2 after spraying across the sensor, and putting a candle that was just blown out up to it. Sensor doesn't seem to work???
I just installed mine yesterday and have not had a reading above 5 for the PM2.5 meter. I also did the firmware update. The purifier works great but if the meter reads low I can’t use the AUTO function.
My middle number was over 60 when I first put it on and its slowly going down to 40, then 30. This machine is brilliant. After getting my ceilings replaced i could not get rid of the light dust no matter how much i hoovered but this seems to be doing the trick. Now that I have one I dont think i could live without it. Just having the piece of mind that im breathing clean air is satisfying.
Good review bud… thanks for all the info. Nobody else actually showed what was on the app, but you did, and pretty much answered all my questions I had. Good day to you, sir! 😊
Yeah I appreciated him covering off the app too. Good review.
We have the 400, love it, can barely hear it on the low setting, we turn it up to 4 during sleep for the fan noise, and the HEPA filter takes all of 10 seconds to change. Going on 9 months and the filter is still good as new. Most important, is the filtering aspect. We had a little accident where food was over-cooked when my daughter come home from college. The PPM display shot up to ~150 and one could definitely smell the burnt aroma. After 10 minutes, the display dropped steadily and within 35 minutes, the smell was gone (completely) and the display reading was under 4 PPM. Love it, love it. My advice, don't think about it, just get it .
Lol my mom gave me same advice just now 😭
Thank you for this video. I have had this purifier for a couple of years but lost the instruction booklet. Now I know how to run it!!! Thanks again!
Great review thanks for uploading this video! I have one of these 400S and three 300S in our home for several months now. I have them running 24/7 on auto mode in quiet mode. I also use the iOS VeSync app with them. We love them and I breathe much better inside the home.
Hi, thanks for the review, can you control the air purifier while you are outside of the house? thanks
best place to place air purifier in room? does it need to be next to wall?
Anywhere :) ..but better in places with more air circulation so it can absorb and clean air efficiently.
Hey there. I did the same test. Mine went up from 1 to 2 after spraying across the sensor, and putting a candle that was just blown out up to it. Sensor doesn't seem to work???
Thanks for refresher course!
I just installed mine yesterday and have not had a reading above 5 for the PM2.5 meter. I also did the firmware update. The purifier works great but if the meter reads low I can’t use the AUTO function.
Does it work on mould?
Why did you edit the video after spraying! I bet the sensor didn't go up because of that spray
Hey, why my device always display 1 (the number of dusts PM2.5)
How about motor noise in sleep mode? Still can hear or not?
In sleep mode there's almost no noise, super quit and led lights will turn off but fan will keep running in low mode. Thanks!
In sleep mode, you cannot hear anything, super quiet :)
How many square feet
1980
You didn't really explain the automode-setting well...
Probably he's already used a purifier before this test.
You didn't even need air cleaner....when you plugged in air cleaner...it was right at 007......