Definitely! constant fast gear changes with a dmf seems to cause premature synchro wear/failure as well (depending on the vehicle). what I believe is happening is the dmf always has a little play in it in all directions and naturally the fingers on a pressure plate are never going to push in 100% equal so under normal gear changes everything has time to disengage properly and all is well, however fast gear changes I believe the play in the dmf and the pressure plate not being depressed 100% equally results in the clutch disk dragging briefly before actually disengaging. This is fine under normal gear change times but if you start changing gears faster than the clutch can actually fully disengage it's going to result in power still being applied to the input shaft and the poor synchro's are going to take the brunt of that.
Tôi thấy loại bánh đà này trên 1 số dòng xe..mới thì chạy rất êm mượt..nhưng khi lò so ở bên trong bị nhão kém tạo độ rơ lớn là không thể nào ổn định ..và rất đắt đỏ..nên bánh đà truyền thống vẫn lí tưởng hơn cùng với mâm ép mặt trời..
eso no hace falta revisar ,siempre hay que cambiarlo cuando se cambia un embrague ,,,,eso es normal al paso del tiempo ,,,,lo que tiene lo hacen casi todos ,,,
Bei Kupplungsrevision Zweimassenschwungrad immer mit ern. Fahrzeug hat dann mindestens 150000Km, das Radialspiel allein sagt nichts aus, Verdrehwinkel mit Tabelle vergleichen, Axialspiel Ausagekräftiger, Radial>hier arg viel Spiel Federn Verbraucht.
Well, you get down the fiddle and you get down the bow Kick off your shoes and you throw 'em on the floor Dance in the kitchen 'til the mornin' light Louisiana Saturday night
the clock is ticking for a new one... 😂
😀👍
@@opelservicekyivGlory to Russia!!!!
@@SlavaBogu888дружище давай без провокаций😐.
Hated driving a car with one of these. Makes quick shifting an absolute chore and damn near impossible.
Definitely!
constant fast gear changes with a dmf seems to cause premature synchro wear/failure as well (depending on the vehicle).
what I believe is happening is the dmf always has a little play in it in all directions and naturally the fingers on a pressure plate are never going to push in 100% equal so under normal gear changes everything has time to disengage properly and all is well, however fast gear changes I believe the play in the dmf and the pressure plate not being depressed 100% equally results in the clutch disk dragging briefly before actually disengaging.
This is fine under normal gear change times but if you start changing gears faster than the clutch can actually fully disengage it's going to result in power still being applied to the input shaft and the poor synchro's are going to take the brunt of that.
Double clutch it, it helps. Ive drove a few dmf cars while quick shifting. The other choice is rev matching it helps a little bit.
they do this so nobody drives fast
Junk design that cost extra money up front and in repairs. Should be able to sue for being sold junk like this by most all manufacturers.
800 dollars just for parts. For what a solid flywheel works just fine and has for over a hundred years.
Thanks for the comment
Tôi thấy loại bánh đà này trên 1 số dòng xe..mới thì chạy rất êm mượt..nhưng khi lò so ở bên trong bị nhão kém tạo độ rơ lớn là không thể nào ổn định ..và rất đắt đỏ..nên bánh đà truyền thống vẫn lí tưởng hơn cùng với mâm ép mặt trời..
A dual-mass flywheel is just as superfluous as EGR valves or other crap that is only installed so that the car causes repair costs.
Troque a luva por uma limpa ou fique sem luva para não sujar a peça
Fica a dica
On the next 60 minutes, im Morley Shaffer
Noone can build a reliable car anymore
Idk why people wouldn’t get rid of it… just put a single mass in it
More confortable than the single mass
Cuz you feel the harmonics bigger than shit when you do that
Такое гениальное изобретение. Осознав всю глубину прогресса встает вопрос: "нахуя, а главное зачем".
Boi I thought it was that basketball sound from scary movie 😭
The quality of new parts are shocking really makes me hate my job sometimes 🙃
Ayow that beat be dropping!
Sounds musical would be an interesting sample
Need weld this solid
Mine has been doing a gallop for over 100k km and still shakes the Jetta at idle like it's a transport
Your engine mounts have to look like dry cracked skin lmao
Faz uns 4 furos, passa o macho, coloca parafuso..tá resolvido....
Währe es qualität würde es nicht kaputt gehen! Und wenn schon warum baut man nicht gleich auf normalen schwung um? Billiger und geht nie mehr kaputt
Eu amo está aula... gostei
Muito obrigado
I only hear Louisiana Saturday night
Bump it a little Chunk😅
I thought you where about to spit bars. Drio the hot new Drake album or something.😮😂
Jeep wrangler makes that same noise when I shifted gears... I hope I don't need a new flywheel😢😢
My Acura is making this same noise!
Sois maravillosos, enhorabuena desde España.
Gracias. Es muy bueno que nos aprecies.
BMW had this problem too mine seemed like it was a little out but I checked and it's still within spec
thanks for the comment
Is that one of them variable flywheel timing flywheels?
This is a double flywheel
Duel mass fly wheel is a load of poop idea they should be scrapped
eso no hace falta revisar ,siempre hay que cambiarlo cuando se cambia un embrague ,,,,eso es normal al paso del tiempo ,,,,lo que tiene lo hacen casi todos ,,,
Bei Kupplungsrevision Zweimassenschwungrad immer mit ern. Fahrzeug hat dann mindestens 150000Km, das Radialspiel allein sagt nichts aus, Verdrehwinkel mit Tabelle vergleichen, Axialspiel Ausagekräftiger, Radial>hier arg viel Spiel Federn Verbraucht.
Зачем все усложнять. Не лучше обычного,,,
its just your LUK 😂
Well, you get down the fiddle and you get down the bow
Kick off your shoes and you throw 'em on the floor
Dance in the kitchen 'til the mornin' light
Louisiana Saturday night
Thank you 👍
If that second one was a quality daul mass you wouldn't be able to move it like that.
Ооо божественный двухмассовый маховик😂😂
Самая ж..па если он клинит с ответстиями не напротив болтов крепления🤦🤦🤦. Тогда болгарка🫣...
Согласен, этого маховика хватило ненадолго
Volante con olgura, no se puede meter el disco ni la maza, reventaria todo😮
Çift kütleli volan bu.2 yıl önce sabit volan taktım.6000 km yi geçti hiç bir sorun yok.
Dual mass flywheel is a nosense and completly awful. I forgot, is rubbish too.
Dual mass flywheels are al bad shit
My audi a4 stoped working showing fuel pressure lost and miss fire and not starting anymore 😢
Other parts of car looks new. A bad shifter detected
Шо его дёргать, первоклассники, демпферные саленблоки высыпались.
Конструкции маховиков адаптируется исходя из параметров крутящего момента, радикальной скорости и типа КПП.
Must me a Mexico made German vehicle
Just wants to play with it !
Lamborghini?
😊VW Transporter
Pink floyd
Fully agree with you 👍
For context ruclips.net/video/JwYX52BP2Sk/видео.htmlsi=pnl5FMSrjW0CA4SK 00:30
😮😮😮😮
Wild
Фазовоащател на кпп😂
Dual mass failure flywheel s😂
60 minutes
BMW?
VW Transporter
Ben ! il fait pas une belle musique !! voilà voilà
Chinese?
Maybe
@@opelservicekyiv ye w stuff like this rather not risk it.
Nah sender
😳🤦♂️🇦🇷
Everything You by today is a piece of junk