I bought one of these. I learned a couple of important lessons in using it. One is that it can be extremely dangerous if it does catch a root or a rock. The instructions say don't put downward pressure on the machine, use max throttle and let the machine do the work. That will work in hard, dry soil or clay, since it is taking small amounts of soil as it advances, it will bounce on the root or rock obstruction. BUT in soft or wet soil the auger is advancing too fast and will grab and lock on the obstruction and instantaneously rotate the machine 90 degrees in you hands and rip your shoulders apart. You need to go slow/part throttle in soft soil to not injure yourself. It's very dangerous in soft soil. The second thing I learned is that the machine needs to be started every couple of months and/or the 25-1 gas/oil mixture goes bad and needs to be replaced. The directions say to store it with fuel in it, and use fuel stabilizer. But that only holds for a few months. Then you have to start over. Another problem I encountered was the inability of the fuel tank pickup to suck gas. My machine had to be at least 3/4 full to keep running. Otherwise it would start and die. I don't know if this is a problem unique to my machine or a design issue. Another maintenance item for storing is to remove the spark plug, pour a small amount of oil into the cylinder and rotate the piston with the pull start to lubricate the cylinder prior to storage.
Some of ya'll may differ, but I just bought one and used it in black gumbo Texas soil - and it worked just fine - I just wish maybe it came with an 8" diameter auger instead of 6". You can barely get any concrete or foam around the post with that narrow of a hole. I might try to wallow out the next ones and rock the machine back and forth to see if I can get a little more space in there.
These things work pretty well even in non ideal soil. I have rocks and roots and it does get caught up but you can work it especially with a post hole digging bar to break things up. You definitely need to be feeling strong that day however.
Thank you buddy for telling us about the bolt that when it’s rattling keep loosing, just put a new one with self locking nut and bolt. I will buy one thank you.
Harbor Freight has the perfect tools for the "I need this tool 6 times a year max" situations. I've had the $20 Chicago Electric Sawzall for like 8 years now and just cut up hot tub with it.
Nah that’s completely false. I use harbor freight tools more than 50 times a year, possibly even more, still going and making me money. I only buy top of the line tools for something that’ll requir a more top of the line tool. Like a 1/2 milwuakee impact gun for tough removing and tightening, or constant use dewalt drills. Otherwise, ryobi & harbor freight can take a real beating with upgrading batteries.
I manually dug four 18in deep holes that took me almost 1.5hrs, lol. Im gonna rent one of these for the next 10 holes I still need to dig and save my back and knees a little. Thanks for the vedio. Your baby is adorable!
I ported one of these motors and put it on a gas scooter. Bought a tunable carb that really made a difference in smoother performance. However it vibrates at higher rpms. Its not well balanced. Still a fun project.
Bro, I have one of these and you make it look easy- but with arms like yours, it probably is- not so much for this old man! Lol. I'm almost regretting buying mine though because the reviews on the 40v ryobi are impressive, and it has reverse!
Rocks will knock you on your butt, or snap back and hit your leg. Just be advised, my legs were black and blue from kickback. Rocks are unavoidable in the CA Sierras.
Literally why I'm on this video lol. Need to make pier footings for a container, and have one of these augers. Was wondering if any companies make 10-12in bits that fit
Great review Barry. Thinking it would be easier for you to use as you have the strength to use it. The kickback can be very dangerous. Is there a video on how you measured and designed the fence?
You know you are right, it can kick back and I was bit tired after it was all done. As for the fence, what you see is how I did it haha. I knew I was using 6ft pickets, and I had stock piled some 2x6x16 boards so I base it all off 8ft centers per post. Winged it from there and came out great!
Haha i was thinking the same thing, it would be twice as hard for me. So if he says extremely easy, it will be moderate for me. Not gonna lie dude seems chill as hell might have found a new channel.
hello, I have the same model. Just replaced the entire carburetor, fuel line, filter, and spark plug (amazon kit) and it's now easily start immediately after 1 crank. However, it's no longer putting out the same torque as before where it would toss me around like rag doll. It's just slowly turning ...very very slow. It's running excellent though, no hesitation, smooth ride minus terrible torque when digging. Please help, any tips to to fix my issue? Anyone?
Used mine once, it started and worked. Not since, though, it acts like there must be a cylinder pressure release somewhere that permits the pull starter to work easily. When I remove the spark plug the cord pulls easily. Upon putting the plug back in, I can't pull the cord. Anybody else have this problem? Have I overlooked something?
dont use this thing where u have alot of clay, i tried this thing and llet me tell you i know have a lower lumbar strain..8 holes took me 4 hours going 32inches deep
I RETURNED 5 OF THESE CRAP MONSTERS- yes they will drill a hole.. but the carberators will fall off- the bolts will fall out, the adjustments will chnge for the idle and the one even took off and wouldnt turn off as it spun in the hole- the so called throttle wouldnt back down. and hf makes over 60 bucks as you have to buy a new warranty everytime you trade the thing in... and if you like me-- its 100 miles round trip to the nearest store... thats over 40 bucks a trip-- so it adds up-- just buy a decent one or rent a hydralic one-- earthquake and toro have 5 year warranties- i havent bought one of them- but if the warrantee is longer than 90 days it must be better i think. earthquake has a viper engine and that is warrantyed as well
I guess itd be wise to get one & loctite the bolts. Cheap buys most likely cut costs to make ends meet. But yeah nothing like buying quality if feasible.
I bought one of these. I learned a couple of important lessons in using it. One is that it can be extremely dangerous if it does catch a root or a rock. The instructions say don't put downward pressure on the machine, use max throttle and let the machine do the work. That will work in hard, dry soil or clay, since it is taking small amounts of soil as it advances, it will bounce on the root or rock obstruction. BUT in soft or wet soil the auger is advancing too fast and will grab and lock on the obstruction and instantaneously rotate the machine 90 degrees in you hands and rip your shoulders apart. You need to go slow/part throttle in soft soil to not injure yourself. It's very dangerous in soft soil. The second thing I learned is that the machine needs to be started every couple of months and/or the 25-1 gas/oil mixture goes bad and needs to be replaced. The directions say to store it with fuel in it, and use fuel stabilizer. But that only holds for a few months. Then you have to start over. Another problem I encountered was the inability of the fuel tank pickup to suck gas. My machine had to be at least 3/4 full to keep running. Otherwise it would start and die. I don't know if this is a problem unique to my machine or a design issue. Another maintenance item for storing is to remove the spark plug, pour a small amount of oil into the cylinder and rotate the piston with the pull start to lubricate the cylinder prior to storage.
I used one of these augers to install over 5000 feet of fence. It ran like a champ. I had no issues in this hard red clay of Virginia.
Great job! Thanks for the tip on the Allen bolts. That saves people a big headache when they drop into the hole.
Need one of these for an upcoming project.....Nice to see you have the 1/2 pint outside watching.....They gotta learn!!!
haha always! Teach them early right
Some of ya'll may differ, but I just bought one and used it in black gumbo Texas soil - and it worked just fine - I just wish maybe it came with an 8" diameter auger instead of 6". You can barely get any concrete or foam around the post with that narrow of a hole. I might try to wallow out the next ones and rock the machine back and forth to see if I can get a little more space in there.
These things work pretty well even in non ideal soil. I have rocks and roots and it does get caught up but you can work it especially with a post hole digging bar to break things up. You definitely need to be feeling strong that day however.
I did run into some roots as well but was still able to manage. Arms were toast afterwards! haha
Thank you buddy for telling us about the bolt that when it’s rattling keep loosing, just put a new one with self locking nut and bolt. I will buy one thank you.
Harbor Freight has the perfect tools for the "I need this tool 6 times a year max" situations.
I've had the $20 Chicago Electric Sawzall for like 8 years now and just cut up hot tub with it.
Nah that’s completely false. I use harbor freight tools more than 50 times a year, possibly even more, still going and making me money. I only buy top of the line tools for something that’ll requir a more top of the line tool. Like a 1/2 milwuakee impact gun for tough removing and tightening, or constant use dewalt drills. Otherwise, ryobi & harbor freight can take a real beating with upgrading batteries.
Been running a fencing company with a couple guys using these for 2 years they work great I got the extensions for them have to bend to far without it
Perfect Review i have to dig 22 holes for a fence also, sold i'm gonna go get one tomorrow,
thanks for the review
Stoked it helped you!
I manually dug four 18in deep holes that took me almost 1.5hrs, lol. Im gonna rent one of these for the next 10 holes I still need to dig and save my back and knees a little. Thanks for the vedio. Your baby is adorable!
Don’t be a Jew. Buyyyyyyy
I ported one of these motors and put it on a gas scooter. Bought a tunable carb that really made a difference in smoother performance. However it vibrates at higher rpms. Its not well balanced. Still a fun project.
Put some Loctite on them and I’ll stay in there forever or a little white paint enamel
1:09 "hmmmcklehhnnn" 😂😂😂
Why would you stand that thing up right beside the baby?
A pipe wrench works good for reverse, a little slow but better than nothing.
Could you explain this please - how to use a pipe wrench for reversing?? Thanks
Bro, I have one of these and you make it look easy- but with arms like yours, it probably is- not so much for this old man! Lol. I'm almost regretting buying mine though because the reviews on the 40v ryobi are impressive, and it has reverse!
Great video. But it's the baby in the background for me. 😂😂😂😂
Maybe some thread lock blue in the box build Allen bolts.
Rocks will knock you on your butt, or snap back and hit your leg. Just be advised, my legs were black and blue from kickback. Rocks are unavoidable in the CA Sierras.
I used a pressure washer to do my 3 inch post holes with concrete.
Thank you sir well done, stay safe!
Harbor freight is good for a non pro..ive had many last for years if you're not using it daily for extreme stuff.
Dude! Where is the ear protection for yourself and the kid. Jus fkn sayn'😎
You should supply more than one bits. It should be small , medium & large according to the machine's horse power
Great video Barry. Just wondering what kinda soil you have there? I'm trying to drill into sticky clay and rock. I looked at this tool last night
Great video my friend. How many cc?
Love your little offsider.
You manhandled that like a pro!
Does Predator or another manufacturer make a 10 or 12 inch bit for this model? Ive seen 8 but i was looking for 10 or 12
Literally why I'm on this video lol. Need to make pier footings for a container, and have one of these augers. Was wondering if any companies make 10-12in bits that fit
If the bolts keep coming out use some lock tite on them!
Great review Barry. Thinking it would be easier for you to use as you have the strength to use it. The kickback can be very dangerous. Is there a video on how you measured and designed the fence?
You know you are right, it can kick back and I was bit tired after it was all done. As for the fence, what you see is how I did it haha. I knew I was using 6ft pickets, and I had stock piled some 2x6x16 boards so I base it all off 8ft centers per post. Winged it from there and came out great!
Haha i was thinking the same thing, it would be twice as hard for me. So if he says extremely easy, it will be moderate for me. Not gonna lie dude seems chill as hell might have found a new channel.
Is the gas mixture 50:1 or 25:1 ????
Ugh I can't even get mine to start
In PA it's $220
True.
hello, I have the same model. Just replaced the entire carburetor, fuel line, filter, and spark plug (amazon kit) and it's now easily start immediately after 1 crank. However, it's no longer putting out the same torque as before where it would toss me around like rag doll. It's just slowly turning ...very very slow. It's running excellent though, no hesitation, smooth ride minus terrible torque when digging. Please help, any tips to to fix my issue? Anyone?
Fantastic!!! 🐕
The best part of the whole video was to see your baby jumping up and down
Used mine once, it started and worked. Not since, though, it acts like there must be a cylinder pressure release somewhere that permits the pull starter to work easily. When I remove the spark plug the cord pulls easily. Upon putting the plug back in, I can't pull the cord. Anybody else have this problem? Have I overlooked something?
Bought my machine today now all I need is muscles
Auger now is 229 now. What a crazy price now
$219.00 in Arkansas
Oh wow! Everything is going up. Wait for a coupon but still worth it for casual use.
Just picked it up for 199 with a coupon
Is there any way this (or something like this) could be used to drill out a tree stump? (With a different and smaller bit of course though
Rent a toro dingo or tractor with backhoe from Home Depot even
i'm buying it!
How many cc is that auger ?
just add loctite on those bolts that were coming lose
Wish it was that cheap again. They are like $240 now...
I know I just had to buy one for that.
I just bought one for $197
bro has a level 6 auger from 7 days to die
They are great unless you live on rocky land
Yea I havent experienced that yet but its coming
dont use this thing where u have alot of clay, i tried this thing and llet me tell you i know have a lower lumbar strain..8 holes took me 4 hours going 32inches deep
Your soil is a dream to dig
❤
Don't lean it close to the baby is not safe
I RETURNED 5 OF THESE CRAP MONSTERS- yes they will drill a hole.. but the carberators will fall off- the bolts will fall out, the adjustments will chnge for the idle and the one even took off and wouldnt turn off as it spun in the hole- the so called throttle wouldnt back down. and hf makes over 60 bucks as you have to buy a new warranty everytime you trade the thing in... and if you like me-- its 100 miles round trip to the nearest store... thats over 40 bucks a trip-- so it adds up-- just buy a decent one or rent a hydralic one-- earthquake and toro have 5 year warranties- i havent bought one of them- but if the warrantee is longer than 90 days it must be better i think. earthquake has a viper engine and that is warrantyed as well
I guess itd be wise to get one & loctite the bolts. Cheap buys most likely cut costs to make ends meet. But yeah nothing like buying quality if feasible.
can but having problems, Really disappointed in this product major problem starting
You gotta ease off a bit. Ever heard the term let the tool do the work? You dont force drills, or augers. Otherwise nice video.
Six inch "bit"? You meant six inch drill or auger?
Bro it's a 6 inch auger bit. Don't be a Karen
219+ tax
Dont need a review to know it is junk! It`s from harbor freight, Chinese junk, enough said.
First comment