335whp with Stock Turbo!? NICE!! Awesome car man. I loved the idea of the magnet Steelie ball mounts for the phone and AP. Defiantly picking up a pair.
you mentioned in the video you have a DIY for the canvas looking wrx thing under the temperature control gagues can you post that or message me how you made that at 4:52 pleaseee and thank you!
The color of your wrap should be an option from the dealership. Never been a fan of grey cars, but it most definitely works in this case. Beautiful car man! 👍🏻👍🏻
My wrx basically shredded itself apart continuously once tq was in the 400hp+ range. Snapped firewall, sheared input shaft in trans, lifted headgaskets every few months, etc etc. Two years new to scrap.
I saw your car on LHG's videos during the meet a few weeks back and wondered what you had going. Some nice details here and gave me some ideas of some different things I can try in my 16 WRX...over time. I really like the alcantara boot and I've been trying to decide about overlays on the rear lights, but after seeing yours I don't think I'll have a problem with a dark smoke since I have the Tail as Turn and my reverse lights are now two and plenty bright. Great looking car and you got a new sub.
also how are the seat belts. i wanna get those for my subi but people tell me its not safe as they have no slack if you crash. While the stock ones have some slack before they tighten so you can do into the air bag alittle.
The harnesses are great, I have them very tight when I wear them, so I think I wouldn't reach the airbag. Or it would just cushion me enough. Hopefully I'll never find out
does the stock white paint under the plastidip cause the fade effect from black to grey? what color and product is that plastidip? how would it look on a blue wrx?
Trunk does not open all the way. Water does run down the windshield but there's an opening where the water runs down and out. Kinda of like a gutter. Hard to explain
No drilling. Uses stock location. I'd say it opens about only 40% now, out of the full 100% of the hatch all the way open. My worst install ever. You need an extra pair of hands and it's super time consuming as well as a hard to work area.
So ill be a little over 600hp on my wrx. How well do you think my r160 will hold up? Im keeping the same axels when i do my swap and do a auto Impreza driveshaft
Hello Clint, what were your output numbers on ACN 91 octane? I'm inquiring because I have a VERY similar setup (yet to install) and am curious about what kind of numbers I can expect on the ACN 91. My car will be dyno tuned.
Cool build! I hope to get near these numbers after getting my flexfuel sensor from cobb. Then turbo time! Stock clutch should be able to hold the power well, source : Tuner.
+Cali_WRX I've been busy with school and stuff but I've been watching most of your videos so far, I need to watch a couple of them to catch up. Your channel is growing bro! Congrats!
on a stock turbo the spool would be slow with a front mount as the air would take longer to get to the turbo in the low to mid range rpm's it wouldn't be ideal. Function over shiny piping and fmic
Tristan Day on top of what John said, top mount being very close to the throttle body, the throttle response is better. Downside is, it can't cool air very well in city driving when the engine heats up the top mount. Front mount: Able to cool air better since it's out of the engine bay closer to direct fresh air. Downside is long piping so throttle response takes a hit. But front mount is needed for pushing HP numbers. Choose whichever you'd like.
@@catzbunn I need an AOS and some boost control. Other then that I have a similar power set up: headers back, same intercooler, intake, 1000cc inj./pump... Did you have before/after numbers with e85? I'm trying to weigh the benefits.
Peter Cooney I didn’t push my 91 map. I never run a high power 91 map. It’s not worth it for Cali gas. I think I honestly made 280whp on 91 which was nothing.
Cali WRX yeah my tuner couldn’t really push it more without the boost controller. I’m in mass, so we can run 93. I’m eventually looking at pistons for a 400 wheel set up.. but that a lot of change. Lol
+CQB91 Because no real gains of where I am at right now except noise. If I got headers and such, then I would do it, but as of now, for the price too expensive for sound lol.
his instagram is now @cali_wrx in case anyone was trying to find him but can not
I think this is one of the cleanest wrx's ive seen on youtube
Thanks man. Ill have a new update video once my car is done with the motor build! so check back in a couple weeks.
335whp with Stock Turbo!? NICE!!
Awesome car man. I loved the idea of the magnet Steelie ball mounts for the phone and AP. Defiantly picking up a pair.
Man, I always forget all the power mods you've done recently. Car looks amazing as always.
Thanks man!
Found you on Instagram and very pleasantly surprised to find a RUclips channel to go along with it, sweet car man!
A lot of love in this car man. Looks great. Just picked up a little project 09 sti hatch.
you mentioned in the video you have a DIY for the canvas looking wrx thing under the temperature control gagues can you post that or message me how you made that at 4:52 pleaseee and thank you!
Watch my DIY video.
The color of your wrap should be an option from the dealership. Never been a fan of grey cars, but it most definitely works in this case. Beautiful car man! 👍🏻👍🏻
+jorge ferro Thanks man! I never knew Id like grey so much too.
My wrx basically shredded itself apart continuously once tq was in the 400hp+ range. Snapped firewall, sheared input shaft in trans, lifted headgaskets every few months, etc etc. Two years new to scrap.
I need to see where you AOS vents goes to. Right now, one of the vents is VTA
Hit me up 1 day
I'd love to go E85, but the closest E85 station is about 2 hours away. Some gas stations around me only sell 87 octane.
6:49 Hey you have my injectors. Did you ever send them out?
Lol the alcantara is thicker so I need to glue it down
xtremely nice ride dude! If only I could drive such a car legally in Austria, but that's not possible.
I like the sticker on side the car Japanese sign looks good . how much u sell them for .
Check out my website: thecaliwrx.bigcartel.com
Can I ask how you got all the green parts including the wheels is it powder coated
looks so good.. Love all the custom work done in the interior.... Back up camera legit !!! looks really clean ..
Thanks man.
I saw your car on LHG's videos during the meet a few weeks back and wondered what you had going. Some nice details here and gave me some ideas of some different things I can try in my 16 WRX...over time. I really like the alcantara boot and I've been trying to decide about overlays on the rear lights, but after seeing yours I don't think I'll have a problem with a dark smoke since I have the Tail as Turn and my reverse lights are now two and plenty bright. Great looking car and you got a new sub.
Awesome, thanks man!! Appreciate it
Muy buen color!! -- Great color!! -- *FC*
What kind of wheels are they, they are my favorite color
EDIT: now making 344whp by 417tq
So sick. I'm looking for 14' WRX hatchback too
how has your stock block held up to that!?
well the time has finally come lol. Lifted a head gasket
I think your bumper guard is installed incorrectly.
should paint inside the doors.. the white looks weird when open
did you buy the engine dress up green? or have to paint it?
Sorry if you said in the video, gotta watch in silence, but what brand vinyl did you use? Link maybe?
also how are the seat belts. i wanna get those for my subi but people tell me its not safe as they have no slack if you crash. While the stock ones have some slack before they tighten so you can do into the air bag alittle.
The harnesses are great, I have them very tight when I wear them, so I think I wouldn't reach the airbag. Or it would just cushion me enough.
Hopefully I'll never find out
+Cali_WRX I just heard it bad because your whole body doesn't move only your head which can cause neck or spine damage
How long have you ran at the power before your head issue?
Denzel Vlogs 2.5 years. Only reason I had head issue is because I tracked it
What is your air reservoir that feeds the top mount? Where you have the minion sticker
It comes with the grimmspeed top mount. It screws into Oem one.
I like your emblem. Where did you get those?
Jdmvinylfanatics.com
I love ur seats I need those in my life would help with mad corners for track days :P
They help me with staying fit and in shape lol. If I get too wide I won't fit!
did you have to rebuild/buy a new block?
It would be cool to see also what kind of problems you've encountered with your build man
Good idea. I've had a lot lol
Or maybe do a series haha
does the stock white paint under the plastidip cause the fade effect from black to grey?
what color and product is that plastidip?
how would it look on a blue wrx?
It's vinyl wrap. Not plasti dip
Did you have the si drive
Can this beat an evo? Why not 24mm rear and 22 front for the sway bars?
Depends on the evo, stock yes. But heavily modified, probably not.
As far as sway bars, these were perfect for how I drive.
Dude I'm subscribing I love this build absolutely
+Donald Burkett Awesome thanks man!
I love the color combination look so sick
Thanks!
amazing color choice! very clean!
Are you in San Antonio now?
does the trunk open all the way with the perrin wing riser and does the it cause the more water flow on the back windshield when it rains?
Trunk does not open all the way. Water does run down the windshield but there's an opening where the water runs down and out. Kinda of like a gutter. Hard to explain
Cali WRX How many degrees is the difference from stock to perrin does it not open?
how was installation, a lot of permanent drilling to the body?
No drilling. Uses stock location. I'd say it opens about only 40% now, out of the full 100% of the hatch all the way open.
My worst install ever. You need an extra pair of hands and it's super time consuming as well as a hard to work area.
Looks like the E-brake boot needs to be tucked back in.
will sti suspension work on the normal wrx (hatch)
sweet mods definitely gonna do mine with some of your ideas
definately favorite hatch! Do you run your acessport WITH a custom tune? or are you using your Accessport for all upgrades?
I have a protune from Snail Performance. Would not recommend the Cobb OTS for a long period of time.
So ill be a little over 600hp on my wrx. How well do you think my r160 will hold up? Im keeping the same axels when i do my swap and do a auto Impreza driveshaft
What's the different between 2009 wrx vs 2009 sti cause I am thinking about getting a wrx lol but yeah
Who makes your tail light overlays? Blue bat?
Vinyl styles
Does that car have a wide body kit on the rear? And if so who makes it?
Nope. Stock body lines from Subaru.
It looks so much wider than the ones I've seen
I know you talked about your vinyl wrap, can't remember in what video that is. my questions. What color is it and how much did it cost you?
Matte dark grey, and my friend did it so was only $1,500
I'm assuming you have to have a muffler delete to fit that diffuser?
Yes, I believe I said I have the muffler delete
+Cali_WRX shit, I want one but I'll have to change my exhaust to fit it lol .....fucking Q300 fatass mufflers lol
I'm sure the guy I bought it from can modify to fit
+Cali_WRX ok thanks man , nice car by the way
Was this stock motor?
Need to add a 0 at 0:45
Eh, people should be able to watch the first :40 seconds without skipping lol
How much did it cost you to build it?
What engine Oil temperature gauge
How long did the clutch hold up for and would you recommend it I plan on going to the same route with e85 and what not.
Hello Clint, what were your output numbers on ACN 91 octane? I'm inquiring because I have a VERY similar setup (yet to install) and am curious about what kind of numbers I can expect on the ACN 91. My car will be dyno tuned.
I was at 293whp and 313tq. As of now though, I have just a e85 map.
+Cali_WRX cool, thanks. I was thinking it should be close to 300. thanks again man.
somebody can tell me why I don't get the boost in my Subaru impreza WRX sti 2.5 ? please help
Cool build! I hope to get near these numbers after getting my flexfuel sensor from cobb. Then turbo time! Stock clutch should be able to hold the power well, source : Tuner.
***** I drive my car like a granny haha
Yes, I replaced clutch as it wasn't holding power
+Cali_WRX I guess I'll see how I do with mine. If it slips. I E85 until clutch upgrade :s
Nice WRX mate
You motivate me so much to mod my hatch haha
Haha, haven't seen or heard from you in a while man!
+Cali_WRX I've been busy with school and stuff but I've been watching most of your videos so far, I need to watch a couple of them to catch up. Your channel is growing bro! Congrats!
Beautiful car and built right. Job well done sir.
Thank you!
info on your Subaru I'm planning on getting one I like your car
At this point I know your running e85.....but what did it make on 91 ?
Nice build bro!
The Kawasaki green isn't for me...But that is a beautiful car...amazing job!
nice built not a fan of the hatch but still looks nice and clean inside, outside, and under the hood
Ohhhh its not painted black?!?! I didnt notice that!
good looking hatchback man, someday my interior will look like that!
Thanks man! I neglected interior for a
While
nice car man I like it never choose automatic transmission OK? only manual
Takumi Fujiwara you can convert the transmission to manual if you really want to
why'd you go top mount opposed to front?
on a stock turbo the spool would be slow with a front mount as the air would take longer to get to the turbo in the low to mid range rpm's it wouldn't be ideal. Function over shiny piping and fmic
Exactly what John Jones said. For stock turbo all it would really do is looks. The pros do not out weigh the cons.
Tristan Day on top of what John said, top mount being very close to the throttle body, the throttle response is better. Downside is, it can't cool air very well in city driving when the engine heats up the top mount.
Front mount: Able to cool air better since it's out of the engine bay closer to direct fresh air. Downside is long piping so throttle response takes a hit. But front mount is needed for pushing HP numbers.
Choose whichever you'd like.
same intercooler weehoo, I'm going e85 soon too. What kind of dyno are you testing on?
Mustang
@@catzbunn I need an AOS and some boost control. Other then that I have a similar power set up: headers back, same intercooler, intake, 1000cc inj./pump... Did you have before/after numbers with e85? I'm trying to weigh the benefits.
Peter Cooney I didn’t push my 91 map. I never run a high power 91 map. It’s not worth it for Cali gas. I think I honestly made 280whp on 91 which was nothing.
Cali WRX yeah my tuner couldn’t really push it more without the boost controller. I’m in mass, so we can run 93. I’m eventually looking at pistons for a 400 wheel set up.. but that a lot of change. Lol
How much did the performance parts cost you in total if you don't mind me asking?
Um no clue. You da add everything up on my wheel well if you want lol
Dope dude!!
complete Beast!
sweet ride
Thanks man
What's the guy who made the diffusers current Instagram name?
Love the green!
Nice job broo
Love the shirt bro malasadas are so good I use to purchase them at Leonard's Bakery in Honolulu !!!
Your car is amazingly b-e-a-utiful!👌🏻✌🏻️
Thanks deez nuts
Are you running full e85 or a mix ? If a mix, how much ?
Just e85, I'm getting a flex fuel tune this Thursday.
Very nice car! I take it no one rides in the back seats?
Thanks, some do. But they all know the risks.
+Cali_WRX If I could fit I'd take the chance, lol. At least the bar is something good to hold onto!
Hey man i'm curious, what do you do when it's emissions testing time?
Go back to stock lol.
lol that's gotta be a bitch and a half with all your mods
Could always find a side place that would do it for extra cash hha
Love your car I have the 2013 sti hatch spark silver
i love this car so much
why no ewg setup?
+CQB91 Because no real gains of where I am at right now except noise. If I got headers and such, then I would do it, but as of now, for the price too expensive for sound lol.
Very nice!
Sick car man
Your car is a masterpiece! Do you swap parts when it's Smogging season...? 😱
Haven't had to smog yet, and won't need to for a
Couple more years
+Cali_WRX oh yeah! Lucky you! I'm swapping back in June!
"Some stickers to add more horsepower" lol
awesome car man !
Sick car
how much hp do u get from stickers?
+2 for each one.
Cali_WRX wow does it matter if they are cheap stickers or is it quality type stickers?
Very cool,perfect subaru;)
I like the wrap color ;)
Thanks man
at the end it sounded like "thanks for watching me giving you a walk around of ma-car lol
Was going to say MAKA but people would have been like "what?" Who are not long term subscribers like you! Haha
Fuckin beautiful dude 😍😍😍😍😍
you sir have earned a sub! im a 04 miata (MSM) owner and you make me want a subie
Thanks man! Check out the video I did of my friends Miata. You'll see it in future videos for sure.
+Cali_WRX No prob bro! and for sure, I will look that vid up right now
exhaust??
Read description
That intercooler tho!! MEATY INTERCOOLER, haha. I'm actually looking at that intercooler too!
+TheSubaruAddict Its so fat!
been working out???
Haha what makes you say that?
+Cali_WRX your arms are toning up! haha
Hha I'm flattered!