Beautiful work John! I’m excited to see your usual superb execution on this kit. I have a soft spot for the Crest. I can’t wait until this is available in the States.
I'm still eagerly anticipating the arrival of mine in the mail, so watching these videos is really ramping up the excitement. Your work on this so far looks great!
II'm building the Razor Crest right now and it took me soooo long until I realized that the ''bathroom'' and sleeping quarters of the ship were RIGHT below the cockpit... lol.
This looks fantastic. Could you do a size/scale comparison between the 1/48 Jeff Lu and the 1/48 X-wing and the 1/72s? What does the 1/48 razer crest look like against the 1/24 studio scale X-wing?
Thanks, I don’t have any 1/72 X Wings left but when the Jeff Lu RC is done I’ll do a side by side. It’s about half the length of a studio scale X Wing….
I'm glad you posted this mate, I'm hiding seams with strip styrene and careful scribing, it's a bit of a pain, but imagine how much this would cost if Bandai did it, happy modelling 🥺👍
The Razor Crest was actually built as a physical model for the filming of the show. Yes, there is the CGI model but for close filming they wanted the look of an actual model. They did the same with the Imperial Cruiser as well.
Great to find your channel. I'm a huge Star Wars fan . Been brought up since 1981 I had the PROPER shall we say figures, and proper films ..lol. I still haven't seen this " Mandalorian" . I just can't get the excitement to pay and watch it. I feel a Star Wars fraud for saying that but the first films ...sorry , the middle , last, first , future whatever they are positioned , LOL a New Hope , Empire Strikes back and Return of the Jedi are the best and the others aren't as good. I will say that the new ones are OK, worth a watch, some better than others etc I was a little sceptical about the Disney Francise coming in but I'm a miserable Tart! Ha One that thinks Nothing can beat the Originals in most things I suppose. Apart from Alien Films... Aliens ( No2) was fantastic and nothing gas come close. Anyway I suppose I'd better say .., " Now cue the die hards that I'm about to get torn apart by .... just my opinion but I'm daily , no hourly , infact minute by minute I'm wrong .... Opinions are like " bum holes ... everyone has one !!" I'm well chuffed to have come across your channel, again . Your Talent for our wonderful hobby is simply second to none. I love videos like this, " Old Skool" no sort of special cuts and make over type things. Sorry I hope you know what I mean, not trying to say your videos are all old etc . I do love your vids and what you do on your bench has talent that us modellers , well me can only dream about . Hope you've had a nice Christmas and good new year. Stay Virus free and most of all stay safe. Your family to. Regards Steve (Mottys Military Models). P.S... Thank you very very much for finding time out of your busy day to not only produce and make such brill work etc but also doing your videos and taking time to share. This day in age " Appreciation " is not seen or heard of so much but I for one respect and appreciate doing what YOU do for us. Stay Safe matey and Happy New Year ... May the Force be with you.
Many thanks mate! Yeah I know what you mean, nothing will ever top the originals, but I just love Star Wars lol. A proper fan boy! Thanks for the kind comments
@@johnsimmonsscalemodelling5270 Hi John I hope Revell does more from the mandalorian like Riot Mar bounty hunter starfighter from season 1 episode 5 the gunslinger I do not have the Razor crest yet hope you do more on star wars
@@johnsimmonsscalemodelling5270 Hi John I see Revell is doing figures from the mandalorian in 2022 I got the outland tie fighter and hope the mandalorian will come out on dvd/blu ray
Am Besten gefallen mir Videos OHNE Dauergequatsche und ewiges Gelaber ! Dieses Video ist folglich MIST !!! Allein das elende Gefummel und Gehampel mit den Modellteilen - einfach peinlich !
For me being a Railway modeller and having started mine I’m happy with this kit it is what it is thanks for your input
Looks great, been trying to find someone working on it & not just an unboxing. Looking forward to seeing more!
Thanks, I’ll try and update it as best I can
I'm Really Liking That Finish So Far Sir !! Thanks For Sharing n God Bless All !!
Thanks 🙏
You're Welcome 🤗
Beautiful work John! I’m excited to see your usual superb execution on this kit. I have a soft spot for the Crest. I can’t wait until this is available in the States.
Hey mate thanks for dropping in! Yeah it does require a lot of TLC but we love the subject so we have to do it lol
I would be proud to have this on my shelf. Decent kit!
Nice of you to say
Thanks
I'm still eagerly anticipating the arrival of mine in the mail, so watching these videos is really ramping up the excitement. Your work on this so far looks great!
Thanks it’s worth the wait!
Looking great mate. Nice big kit.
Thanks mate! Gotta lot of love for 1/72
I like how he explain parts issues.
Looks a treat mate! Fantastic work!
Thank you!
Exelent model kit. So well done
Many thanks!
Just found your channel - great stuff! Looking forward to future updates! Cheers! Phil
Thanks Phil!!!!!
Looks good 👍, ready for the next video
Thanks! Thoughts it’s been done a while!! Check the rest of my vids ;)
Looking good dude!
Thanks man!
Fantastic work!!
So after the basic color you brushed a few panels with Tamiya clear blue and then over there engine black, is that right?
Many Thanks
II'm building the Razor Crest right now and it took me soooo long until I realized that the ''bathroom'' and sleeping quarters of the ship were RIGHT below the cockpit... lol.
This looks fantastic. Could you do a size/scale comparison between the 1/48 Jeff Lu and the 1/48 X-wing and the 1/72s? What does the 1/48 razer crest look like against the 1/24 studio scale X-wing?
Thanks, I don’t have any 1/72 X Wings left but when the Jeff Lu RC is done I’ll do a side by side. It’s about half the length of a studio scale X Wing….
I'm glad you posted this mate, I'm hiding seams with strip styrene and careful scribing, it's a bit of a pain, but imagine how much this would cost if Bandai did it, happy modelling
🥺👍
Great idea mate, yeah I’m going to have to take careful pics when it’s finished to not show the seams! 🤣
The Razor Crest was actually built as a physical model for the filming of the show. Yes, there is the CGI model but for close filming they wanted the look of an actual model.
They did the same with the Imperial Cruiser as well.
Yup John Goodson did beautiful work on both of those models
Great job Brus
Thanks 😊
The kit parts are used on the ILM filming miniature for the Razor.
Interesting, they still most likely would have been printed then as they appear at different scales around the model.
Amazing as always
Are the real one?
Great to find your channel. I'm a huge Star Wars fan . Been brought up since 1981 I had the PROPER shall we say figures, and proper films ..lol. I still haven't seen this " Mandalorian" . I just can't get the excitement to pay and watch it. I feel a Star Wars fraud for saying that but the first films ...sorry , the middle , last, first , future whatever they are positioned , LOL a New Hope , Empire Strikes back and Return of the Jedi are the best and the others aren't as good. I will say that the new ones are OK, worth a watch, some better than others etc I was a little sceptical about the Disney Francise coming in but I'm a miserable Tart! Ha One that thinks Nothing can beat the Originals in most things I suppose. Apart from Alien Films... Aliens ( No2) was fantastic and nothing gas come close. Anyway I suppose I'd better say .., " Now cue the die hards that I'm about to get torn apart by .... just my opinion but I'm daily , no hourly , infact minute by minute I'm wrong .... Opinions are like " bum holes ... everyone has one !!"
I'm well chuffed to have come across your channel, again . Your Talent for our wonderful hobby is simply second to none. I love videos like this, " Old Skool" no sort of special cuts and make over type things. Sorry I hope you know what I mean, not trying to say your videos are all old etc . I do love your vids and what you do on your bench has talent that us modellers , well me can only dream about .
Hope you've had a nice Christmas and good new year. Stay Virus free and most of all stay safe. Your family to. Regards Steve (Mottys Military Models).
P.S... Thank you very very much for finding time out of your busy day to not only produce and make such brill work etc but also doing your videos and taking time to share. This day in age " Appreciation " is not seen or heard of so much but I for one respect and appreciate doing what YOU do for us. Stay Safe matey and Happy New Year ... May the Force be with you.
Many thanks mate! Yeah I know what you mean, nothing will ever top the originals, but I just love Star Wars lol. A proper fan boy! Thanks for the kind comments
Not sure if bandai gonna be making it at 72 scale..hope so they do lol
It’s a great kit for the price. I would love studio scale but the price is just too much. Great video always enjoy seeing your work.
Thanks man, yeah totally. It’s a very affordable model
@@johnsimmonsscalemodelling5270 Hi John I hope Revell does more from the mandalorian like Riot Mar bounty hunter starfighter from season 1 episode 5 the gunslinger I do not have the Razor crest yet hope you do more on star wars
Hi Ralph I know Round 2 models is doing star wars kits now old and new
@@Ilikemc_donalds yes I was thinking of scratchbuilding that possibly one day
@@johnsimmonsscalemodelling5270 Hi John I see Revell is doing figures from the mandalorian in 2022 I got the outland tie fighter and hope the mandalorian will come out on dvd/blu ray
Hi, what silver paint did you use? Thanks
how do u apply glue to such models...is it mentioned in the instruction booklet
I use tamiya liquid cement for styrene kits and Super glue (CA) for resin
@@johnsimmonsscalemodelling5270 but when do u feel the need to apply glue to scale models.
@@ramanjeet1111 instructions tell you on the styrene kits
Hope the thin wax cement should get removed easily,as it should not stick to the hands too much
@@johnsimmonsscalemodelling5270 am using a general purpose glue to stick the model parts.....is that ok
Thats the thing, those digital kit parts are not to a common scale, so you can't build a true 'studio scale' kit and use existing kit parts.
Yeah exactly, you’d need those parts scanned and printed at your desired size.
Subs added
Just a comment for the algorithm
Am Besten gefallen mir Videos OHNE Dauergequatsche und ewiges Gelaber ! Dieses Video ist folglich MIST !!! Allein das elende Gefummel und Gehampel mit den Modellteilen - einfach peinlich !