Yes bro, its the CLD Monster series exhaust. I like it too but it is too loud and not neighbours friendly so I had to take it off and replace with this WRX GP3 exhaust. So far, I am liking it.
@@rdeee2040 yess they do, but one of my requirement was, I want it to be less noisy, but not super quiet and they said they have the exact one that fit my need....hence, the current GP3 exhaust I have now....its perfect
I dont think so because the piping is too different. CLD has only 2 pieces (muffler connected with the manifold and the header) which connects right in the middle while the WRX comes in 3 pieces (header, manifold and muffler). So by this alone, i dont think it is compatible to mix the 2 exhaust.
I dont know yet, i still havent get to test it out but in terms of sound, this wrx is significantly less noisy which makes my bike is more neighbourhood friendly. But in terms of speed, ill have to take some time to test it with a couple of my friends.
@@kukpp5562 kalau warranty, mmg slalunya, dgn modi mcm ni, warranty akan void, tapi, slalunya, modi yg sgt kecil mcm ni, akan org akan pandang sebelah mata sajalah...xpun, kalau ada apa2 issue, sblm bawak pg claim dr suzuki, tukar balik exhaust stock dulu 😅 Pasal sama ada ngam atau x exhaust ni utk gsxs, boleh tny dgn seller, check IG dorg, Btech Racing
Thank you for using our product 🔥🔥
It's my pleasure boss
Cadass emang knalpot wrx ini.
@@tuanryan9524 🔥🔥
What type of pipe you use? K150 or RS150?
@@ginsapoetra3975 K150 SE (not K150)
Finally 🫶🏻. Mesti lagi padu pakai wrx , idling pun tak bising sangat kan
Even bila jalan pn, xbising sgt so lebih bagus sb exhaust CLD terlalu kuat dia jerit.
@@Hitman4Presidentkiranya wrx lagi better kah daripada yoshimura in term of bunyi perlahan and performance? This both is my priority
ekzos ni perlu dyno lg ka atau tak perlu? sbb exhaust std kadang2 pandai extremely low idle lepastu padam biarpun enjin dah panas
i like your old exhaust... cld monster right?
Yes bro, its the CLD Monster series exhaust. I like it too but it is too loud and not neighbours friendly so I had to take it off and replace with this WRX GP3 exhaust. So far, I am liking it.
the wrx is type k3 or k2 how many cm is the length .
This is the k3 version, about the length, i am not sure about that
@@Hitman4President thank you bro
Can this exhaust be use on at stock bike. Would it affects the standard HP of the bike ?
As far as I know, yes, it can be used on the stock bike without any tuning. There are some videos showing the dyno result after installing it.
i think wrx have the standard low noise one. special edition i think. that one more "neighborhood friend"
@@rdeee2040 yess they do, but one of my requirement was, I want it to be less noisy, but not super quiet and they said they have the exact one that fit my need....hence, the current GP3 exhaust I have now....its perfect
@@Hitman4President yup depend on your spec actually as for me personaly if "nak main standard modi" 😂, can use that special edition one.
@@Hitman4Presidenthow much more hp gains on stock bike? I am planning to get one for my r15 v3 aswell
❤❤❤❤
Hi Boss , its the WRX GP3 open ? Where to get this exhaust boss in malaysia ?
Contact Btech Racing di Instagram.
Mantap
Brapa harga ekzos siap pasang.. kedai kt mna
Siap pasang + tuning dalam rm800. Boleh check IG dorg: Btech Racing
Ni ecu std atau dah tukar?
Bro do you think that the cld pipe can be mixed with wrx muffler? 🤠
I dont think so because the piping is too different. CLD has only 2 pieces (muffler connected with the manifold and the header) which connects right in the middle while the WRX comes in 3 pieces (header, manifold and muffler). So by this alone, i dont think it is compatible to mix the 2 exhaust.
@@Hitman4President interesting, thanks for the info brother 👍
This is gp3 k2 or k3 sir? For pipe k150 se no sir?
i am not sure but from what I've checked online, my exhaust most likely is the k3 version. Ill try to find out more if i can
@@Hitman4President ok sir thank you 🙏🏻
Bro..Windshield linked ,,please..tq,,👍
Here you go
shp.ee/hyqv83x
May I ask what ecu are you using?
Sure, I am using the Aracer Mini5 ECU
What is your sprocket setup? Is it standard?
The current sprocket setup is 44R-15F
Kedai kat mne eh?
Boleh check di Instagram dorg, Btech Racing & boleh trus check dgn dorg
Mana beli banh
cara keluar api gmn ya brader?
wrx better ?
I dont know yet, i still havent get to test it out but in terms of sound, this wrx is significantly less noisy which makes my bike is more neighbourhood friendly. But in terms of speed, ill have to take some time to test it with a couple of my friends.
Salam sir, kalau pasang pada gsx s sesuai x K3 ni? Adakah warranty akan void kerana motor sy masih dalam warranty
@@kukpp5562 kalau warranty, mmg slalunya, dgn modi mcm ni, warranty akan void, tapi, slalunya, modi yg sgt kecil mcm ni, akan org akan pandang sebelah mata sajalah...xpun, kalau ada apa2 issue, sblm bawak pg claim dr suzuki, tukar balik exhaust stock dulu 😅
Pasal sama ada ngam atau x exhaust ni utk gsxs, boleh tny dgn seller, check IG dorg, Btech Racing
stim nampak fuhhh
Kasi love sikittt
Give me you cld monster exhaust 😭😭🤲🏻🤲🏻🤲🏻
Unfortunately, Ive already had it sold about a month ago 😁
Bro how can i wassap you?