Arduino esp8266 wifi Tutorial: esp8266 Projects:Home/Office Automation using Android cell phone app
HTML-код
- Опубликовано: 14 ноя 2018
- Download link:
The programming and wifi mobile application can be downloaded by clicking on the link below:
www.electroniclinic.com/ardui...
Subscribe to my New RUclips Channel, if you want to watch my videos in Hindi/Urdu
/ @letsgetstartedd
Project Description:
Do you want to learn how to make your own esp8266 wifi module based Home/ Office automation Project along with a feedback system then watch this tutorial from start to the very end. Because at the end of this tutorial you will be able to make your own automation system using esp8266 wifi module.
This tutorial will cover the following.
1. esp8266 wifi module software/firmware update
2. use of at commands
3. complete project circuit diagram
4. interfacing
5. programming
6. testing.
***************************
Purchase links for Components and tools with the best prices. "Amazon"
ESP8266
amzn.to/2PBGhdw
Arduino Nano USB-C Type ( recommended):
amzn.to/4ahGLdk
ESP32 WiFi + Bluetooth Module for iOT Projects (recommended), more IO pins, improved speed, and supports a Lipo Battery:
amzn.to/3v40DkE
Other Must-Have Tools and Components:
Top Arduino Sensors:
amzn.to/3vZbnfM
Super Starter kit for Beginners
amzn.to/3cq56C5
Top Oscilloscopes
amzn.to/3ctF3d8
Variable Supply:
amzn.to/2PEAqE7
Digital Multimeter:
amzn.to/2QGRPg1
Top Soldering iron kits: "best"
amzn.to/39nqDtb
Top Portable drill machines:
amzn.to/3suQMh7
Jumper Wires:
amzn.to/2NYPEDA
3D printers:
amzn.to/3ruG1dt
CNC Machines:
amzn.to/3cuZWVv
Electronics Accessories:
amzn.to/3sueV7z
Hardware Tools:
amzn.to/3m9UhaN
DISCLAIMER: This video and description contain affiliate links, which means that if you click on one of the product links, I will receive a small commission. This helps support the channel and allows me to continue to make videos like this. Thank you for your support!
Follow me on Facebook:
/ 190031841821771 
Наука
Thank You So Much For This loving Project May Allah Give You More Success Ameen!
So nice of you
sir, why do we have to remove the GPIO-0 from the GND before running AT command on serial monitor?
Did u flash the Arduino uno board?? What if i want to code another program w/o flashing the board is it working or need to reset the board to go back as brand as new?
Sir why after i flashing the esp8266 and remove GPIO0 my arduino port is not available ?
why did u used external 12v supply to the arduino and relay..what if u directly supply 5v from the arduino to relay?
Thanks A lot, You gave a very strong step a head, jazak allah khair
Hi I use this code on arduino but my arduino uno shows "softwareserialesp8266 redeclared as different kind of symbol". Please help me with this.
thanks sir, what is the deference if i use ESP 8282 instead of ESP 8266
Sir, only you can help me. I have successfully connected Arduino and ESP01 serially. And results being displayed on 16x2LCD. I want to read RSS with ESP8266 01 and display on my LCD. like weather forecast. I'll be thankful, grateful all my life if you give me detailed instructions. No blynk or anything.
Sir I am having trouble with AT command because it answers ERROR in serial monitor, I followed all the steps you said in the video but still ERROR. Hope you can help me with my problem sir.
is it necessary to connect aurdino for esp 8266 01 for 2 relay?
Where do you define the ssid and password of access point network ?
great job done sir
make a project use a Nodemcu esp8266
This was really knowledgeable and easy to follow. Could I get the mobile application code or any video as to how to make that ,I'd be grateful
check playlist, or visit my website and search how to make android app.
how to get ip address of other connected device on android hotspot? i have searched the internet but the program i found only for local ip address.
Sir AT command working well with arduino uno but how i can use esp8266 01 as webserver without arduino
please make a “PROGRAMMING" video on “ARDUINO UNO with ESP8266 $ 8 CHANNEL RELAYS" and control by Android phone....🙏🙏🙏
Hello. I am from Vietnam. Your video is great. Can I control relays when my phone using 3G, 4G. Please reply me. Thank you so much.
Yes you can with GSM module
When I upload the code.... Then I am seeing error (was not declared in this scope).....
Please help me
sir I could not update framewire it shows connection faild message
Sir i'm using this firmware(esp8266_flasher) v0.9.5.2 AT Firmware but i'm not able to fire AT command i don't knw what to do sir plzz help me
From the lower drop-down make sure you choose 'Both NL & CR' and 9600 baud rate.
sir can i control this in the all word by Ethernet plz conform
please Make a project on "ARDUINO UNO with ESP8266 & 8 CHANNEL RELAYS" and program it..... 🙏🙏🙏🙏🙏
how can i down load the wifi softwware?
Sir when i compile the this coding see one msg
Hello! May i have the code for programming? :)
Greetings sir, i made it and its working but when i click on a button its "sending message to server please wait. what could be the problem?
its ok
it works
Is there ip address is changed or not ....
sir, can I contact you? I have also done home automation project using Arduino mega and esp8266 module and blnk. It is working fine in dc current but when I connect AC supply, it is working for 2-3 minutes fine. Then esp8266 disconnected automatically. I can't find any solution. Please help me, sir.
replace your esp8266 module with nodemcu esp8266 and follow my tutorials.
@@ElectroniClinic Thank you sir. But I dont want to use nodemcu. So is there any possible way to work with esp8266 and Arduino. Is that problem is for blynk?? Or the firmware of esp8266 is not updated? Sir if you can suggest me, it will be very greateful.
And sir I have done the same circuit which you have shown in the video but after 2-3 minutes the "esp8266 is not responding" shown in the serial monitor. The esp8266 module release the wifi connection. I have tried lots of things in 4 week. But can't find any solution.
you know it can be a power supply problem or the updated version of the firmware, that's why i said you should go for nodemcu, that's the easiest one and works perfectly, I have so many videos on nodemcu. simple esp8266 is only a headache, that's why i use nodemcu only
Will you please make a video on how to creat this application
yes dear very soon. actually i am setting up website and google play store. then the source code will be available. you can subscribe my channel. you will get the notifications.
Very good my friend. Hope you have instruction how to make app on mobilephone.
sir can you please send me the frame work software
For AT connection check in Serial monitor it says ERROR,what should I do can you help me out with this?
check your wiring, and make sure you flash the esp8266 module.
Sir ,can we introduce timer in the app so that when we switch on any device it will get off after a specific duration
yes my dear you can.
simply use a timer on the android side. or you can also use a timer on the arduino side.
@@ElectroniClinic Thanks sir for a very fast response........
you will always get a quick response.
if if you have any questions, you can comment here, or you can also sms on my whatsapp number.
don't forget to subscribe.
@@ElectroniClinic Sir please give me the app kabirkmr2018@gmail.com
Very nice and interesting tutorial video, thank you for sharing your project.
However, even totally following your instruction step by step and is it giving result in AT commands in the Serial monitor as shown in your video,
even I spent almost 2 days but can not make mine to work. I am always getting ""Data sent, waiting for reply from server..." and lat er "Connection to
192.168.4.1:80 refused" , I am suspecting that my ESP8266 is not cooperating, I am waiting for my another order of ESP8266 module to
come and try again.......
my dear esp8266 is just a headache. That's why I stopped using it. go for Nodemcu esp8266. I have so many videos on Nodemcu esp8266 that will really help you. stop using esp8266.
Check my videos and you will get my point.
@@ElectroniClinic Hi, thank you for the reply..... I took it as a challenge and at last, since yesterday I managed using ESP 01 module with Arduino Uno + Blynk App and it work for almost 24hrs with out any problem yet. In addition to the relay control, I can even get feedback from the hardware(Analog). I watched your Nodemcu esp8266 videos and it seems much easier than using this ESP 01S module. Similarly I have done it with Wemos D1 and Wemos D1 mini. I will test it with Nodemcu once I got mine. Again thank you for all your shared video, it help us newbies a lot.
The best Baud rate for me is 9600, also I found a link that suggest to put 0.1uf decoupling capacitor across the 3.3V and Gnd then at least 470uf near to the power supply source.
SAME PROBLEM
Why we are esp flash downloader
i did't get ip address only i get Server ready plzz help me
Uodate ur firmware. And follow each and every step.
can I use VPN in this device?
please make a wifi.apk tutorial
It always disconnects every now and then, same as with the video. Have you fixed it?
This module is a headach. Now i only use nodemcu esp8266.
Check my videos on nodemcu esp8266
@@ElectroniClinic Ok mate, ill try purchasing ASAP. Not a well-polished video, but still a very good guide. Much appreciated.
can you send me firmware update software?
Provide the link for flasher
Hi, where I can find the code pls , I really need this project, thankyou po
its available on my website, electroniclinic.com
Sir this code not working server not reply why? Please help me
This code is 100% working. Check your libraries and update your firmware
Please send me latest firmware and library for this code because this project I like email. Pradeeshtva@gmail.com
Check playlist. I have added a video on how to update the firmware
Sir I am downlod new firmware now code is working. But some time not working why? Not response maybe firmware problem please help me
in this video why you make by pass
Sir please sen me
ESP8266 Update folder
This folder ESP8266 _flasher_and 0.9.2.4
I too whant
I use your link for programs but it requires id and password so help me in this
Site will be online again in a few mints.
@@ElectroniClinic thank you
Check its online
can u sen to me firmware please
where did this enthusiasm go?
lolxx long ago
can u send me firmware and android application plzz sir i need
Ur email id ??
Can u sent me updated farmwear
ya sure why not. comment your email id. i will send you after i get free.
Sir can you send me the app apk and its program??
yes sure my dear. your email id ?
please can you send this app link on my mail ashishsurve353@gmail.com
mapula815@gmail.com mine too sir please
Sir pls send me App link
26rahulkumar@gmail.com
@@ElectroniClinic please, Send me fille adk of app. Thank you. my mail: bollbat5566@gmail.com
Sir kindly send me this app file
Its available on my website
plz sir can you provide me coding of this
remind me tomorrow.
@@ElectroniClinic thnks and also send me ap
hello sir... can u send app code this aplication to my mail please??
the app code is available to my patrons only. visit my Patreon page. you can subscribe for 5 dollars, this way you get access to hundreds of other projects.
If you only need the app, it's already available on my website. www.electroniclinic.com
@@ElectroniClinic hello i sub your patreon but not see this article brother
@@ElectroniClinic i need source code from your app
Wait let me check
waiting for your email id. Hurry up, then I will start working on another project.
sir can you send me the codes
we are working on the website. check back later. it will be available on my website. www.electroniclinic.com
Hello can i have your email?