Olá, tenho o mesmo sensor mas não conseguir fazer essa modificação para aparecer em percentual conforme você demonstra utilizando configuration yaml. Teria como fazer um vídeo passo a passo. Desde já, parabenizo pelo canal
desculpe ouvir isso. Acho que você está cometendo um erro simples... por favor, dê uma olhada mais uma vez na descrição do vídeo. agora há um código que você só precisa copiar e ajustar com o nome do seu dispositivo. então, em vez de climate.water_level, coloque seu nome, então climate.your_name.
Hi, I think you should look at the wiring diagram on the internet for such controller, just type WF96L wiring diagram. The controller itself is not powering any devices that you connect to it, the idea is that the controller is like a wall physical switch for light bulb. Sorry, but unfortunately I did not have a chance to show it on the video.
Hi, you don't need to code anything if you will use this device in Tuya app called Tuya Smart. I'm using it in the Home Assistant so that's why I had to do some coding. I'm showing the Tuya Smart application in my video. Good luck.
Does it support dry run protection? And ground water tanks water level indicator? I habe 2 hp summersible pump which start with MCB type starter. Does this support MCB starter?
Sorry. I did not use all features from this devices. If you look for wiring diagram you may find your answer but important notice is that the device is not powering the connected devices to it, it just a relay. And I've also noticed that it's very sensitive and if the sensors are wet it will be still showing wrong state. For septic tank it is a big problem as you don't have only water there 😅
Hi, but where/when do you have a problem? I had already a chance to test it... it nicely show the utilisation, after empting it got 0%... as far I'm very satisfied with it. Exactly what I needed...
@@SmartTubeOfficial Hello my friend, as I'm new to homeassistant, I was coding the wrong sensor. I watched your video a few more times and managed to get it to work. I just have to say thank you, thank you very much. Working perfectly now. Thanks for the video.
Thanks! Your subscription is enough! 😁 good luck and if you are interested more in home assistant i have a series from zero to automated home. It's a HA feom scratch series... see you!@Asterixrlc
Olá, tenho o mesmo sensor mas não conseguir fazer essa modificação para aparecer em percentual conforme você demonstra utilizando configuration yaml. Teria como fazer um vídeo passo a passo. Desde já, parabenizo pelo canal
desculpe ouvir isso. Acho que você está cometendo um erro simples... por favor, dê uma olhada mais uma vez na descrição do vídeo. agora há um código que você só precisa copiar e ajustar com o nome do seu dispositivo. então, em vez de climate.water_level, coloque seu nome, então climate.your_name.
Amazing and helpful video!!! congrats!!! Do you know would be the maximum sensors cables size ??? Thanks in advance!!!!!!
Thanks! It is written that the cable can be max 50 meter long.
@@SmartTubeOfficial Thanks!!!!
hello friend. The input voltage to power the controller is 220AC or 12v DC?
Hi, you may find two versions one is for 220 and another is for 24 or 12, don't remember now, but I'm using 220. Good luck!😁
Olá, teria como disponibilizar esse código YAML não estou conseguindo fazer essa automação nessa etapa do vídeo. Desde já muito obrigado
Olá, mas o que exatamente você quer dizer? Para qual código yaml? Para sensor no Home Assistant? Já está na descrição do vídeo.
What kind of relay is needed to control water pump? What voltage is in controller output? 230 AC or 12 DC?
Hi, I think you should look at the wiring diagram on the internet for such controller, just type WF96L wiring diagram. The controller itself is not powering any devices that you connect to it, the idea is that the controller is like a wall physical switch for light bulb. Sorry, but unfortunately I did not have a chance to show it on the video.
@@SmartTubeOfficial ok, now I understand. I thought I needed a relay, but there is already an embedded relay.
I want to take the product. But is it coding Can't be used without it?
N.B Well home water tank 500L.
Hi, you don't need to code anything if you will use this device in Tuya app called Tuya Smart. I'm using it in the Home Assistant so that's why I had to do some coding. I'm showing the Tuya Smart application in my video. Good luck.
Does it support dry run protection? And ground water tanks water level indicator?
I habe 2 hp summersible pump which start with MCB type starter. Does this support MCB starter?
Sorry. I did not use all features from this devices. If you look for wiring diagram you may find your answer but important notice is that the device is not powering the connected devices to it, it just a relay. And I've also noticed that it's very sensitive and if the sensors are wet it will be still showing wrong state. For septic tank it is a big problem as you don't have only water there 😅
I accidentally bought wrong version. Can i use humidity and temperature controller device with water level and water temperature sensor?
What do you mean by wrong version? This devices cannot power devices if you meant to connect temp sensor to it.
Hi, I have the same problem, but I couldn't replicate your idea.
Hi, but where/when do you have a problem? I had already a chance to test it... it nicely show the utilisation, after empting it got 0%... as far I'm very satisfied with it. Exactly what I needed...
@@SmartTubeOfficial Hello my friend, as I'm new to homeassistant, I was coding the wrong sensor. I watched your video a few more times and managed to get it to work. I just have to say thank you, thank you very much. Working perfectly now. Thanks for the video.
Thanks! Your subscription is enough! 😁 good luck and if you are interested more in home assistant i have a series from zero to automated home. It's a HA feom scratch series... see you!@Asterixrlc