Freego X2 can it be programmed and how I did a brake sensor delete
HTML-код
- Опубликовано: 18 сен 2024
- This is a quick video on the controller. I don’t think it’s able to be reprogrammed. If you have any insight, please leave it in the comments. Also, I go over two methods of deleteing your brake sensor.
Again, this is for information and entertainment purposes only do not copy me.
(These are affiliate links and I use all these products on my bike)
Chain roller link:
amzn.to/4deLLQH
Tire tubes:
amzn.to/4deLLQH
Phone mount:
amzn.to/4efiTsH
Swingarm silicone guard:
amzn.to/4dfmsOm
Lights under battery:
amzn.to/3XNEiU5
Lights under the seat:
amzn.to/4gtrnOt
Rubber tie wire:
amzn.to/3Bk8xsQ
That other plug is a backup hall sensor in case you fry the 1st one.
Awesome thanks
One of that plugs is a second hall sensor from motor
I had the same problem with my horn as well.
Me too only when I honk and throttle
It’s a bummer, but I think the horn just post too much power. I like how loud it is, but I might look into getting a smaller one.
Great thank you! Was hoping there was way to discomnect brake sensor. I ordered one 4 days ago but wont ship for another 22 days. Hella bummer on wait .
Yea but that shipping is way shorter than I had to wait. It is a lot of logistics to ship that big of an Item.
@E_bikeDad they said the new batch/container is on the sea being shipped to California warehouse, arrives on Oct 10th there.
I have the original ekx x21 and you can reprogram the controller from the display. Not sure about this controller. Because the original ekx x21 controller was made by the same company who makes the bike.
If you can do that through the display I don't know how there are no buttons to access the menu. unless its some combo if the horn light and Park button.
How do you program controller with display
@@E_bikeDad i guess the original one is different. Has like a D pad. You can enter like 3 different menu layers. You can do stuff like control current to the motor. Etc..
@@nickz3600 for the original ekx x21? I made a video on it. ruclips.net/video/8ANB7pBkkjw/видео.htmlsi=nEpedEXWlwmIjhE9
The X2 has zero buttons for display
thanks for this. i have been wondering about how to do this while i wait to order one. definitely going to just unplug them and find a way to completely remove the wire as well. just one more reason to be hyped over this bike now, cant wait! great video. for the error also possibly check that no wires are pinched, not just at the connection points. had an issue on a ebike i built that drove me nuts trying to find the cause and turned out to be a bad wire caused by a bad ziptie placement. what are you using to hold the chain up to the frame?
I’m gonna make a short video on that another time, but it’s basically a chain roller for pedal bikes But it doesn’t roll. It’s just a plastic thing that eventually the chain is gonna eat through it they send you to bottom pieces. But since I’m not doing any peddling, I got it to keep my chain tight and stop making noise. You hit a bump the chain flies all around also slapping the frame and making a noise since I installed this there’s no noise from the chain. I’m gonna have to upgrade my kickstand because when you hit a good bump, it makes a noise.
@@E_bikeDad yes this was my thought exactly as well since not pedaling i am going to want to do something similar. was even thinkin of a kickstand delete (my personal usage i always have a stand nearby) do you have a recommendation for the chain roller?
This is the best option thats out there. I put a link in the description of the one I bought. I really want to fabricate one that works like this but has a roller like on a SSR110 or KLX110 just with a swing arm bracket or under mount.
@@E_bikeDad thank you and yeah once i have mine i will be looking for doing this or a similar mod forsure
Honestly, I may drill the bottom bracket out and just bolt a chain roller to that part. I’ll cover it when I make the video on that piece and how I will customize it. But it might work and I don’t need to do anything. I have to test it and see.
Mine does the same thing with the horn
Good to know, I’m not the only one I think it has something to do with the way. The wire harness goes, and the power of the horn takes takes to honk.
@@E_bikeDad I freaked out the first time. I was way out in the middle of the woods, I bumped the horn and it shut down with e24. Btw, all of the rattle on the bike comes from the kickstand. I drilled out the rivet in the hinge and the-bolted it tightly and the bike is silent now. Oh and the headset wasn’t properly tightened on mine. Had to tighten it up because it creaked.
Have you contacted the manufacturer about the issues? If so how has the customer service been?
They usually get back to me in a couple of days but they have a RUclips account that usually responds quickly.
You know I didn't notice the error code when it happened, but I have the exact same problem you do. If I honk the horn it cuts the power. I found it if I keep the throttle going and honk the horn it seems to stay on but if I don't have any throttle and hit the horn it'll shut the power off and then I have to come to a stop to get it to go again.
On a different topic. Is your battery plug connector loose ? because mine's real loose and it doesn't seem to make a good connection and I'm not sure it's charging the battery properly.
Yes, I have the same issue and what I’ve been doing is I time my battery and every now and then I go unplug it for a full two minutes then plug it back in. My concern about the battery is the time it takes to charge right now. My average is 10 hours. And that’s for a complete drain.
Start timing how long you charge your battery for I’ve been riding it on a sticky note when I charge so I can get an average to know how long it’s gonna take to charge. The other day I ran it till I was missing one bar and then charged it and it took three hours just for that last bar to charge.
@@E_bikeDad I'm going to take it out now and try what you are saying. I had it out yesterday and it went down 1 bar. I went 17 miles ( most of that was in economy mode),but when I got back to the house it went back up to full bars so I didn't charge it. I'll see where it goes down to today. It still seems like the plug from the charger to the battery is very loose.
Look at the chart I have on my range video by looking at the voltage your bike shows when you hit the throttle. you can look at that chart and it’ll tell you close to what percent full you are at.
The first night I tried charging it up. It was like 8 hours and the charger was still red and so I thought well I'm not leaving this thing on overnight I don't want to fire going on. So I think it was the next day I plugged it back in and charged it up for a while and I was about to give up again and I found that I finally got a green light. @@E_bikeDad
Is it difficult to find break pads do you know where to get them ?
Search EKX X21 brake pads
Or just ask freego customer service.
I did that they don't even know what brake pads they have. All they sent was a picture of some brakes that had one set of pads that would fit and a second set that had the wrong mounts. ekx or ridstar has the pads you need.
@E_bikeDad oh weird. Thanks for all the info 👍 my bike won't be here for about 28 days so I'm living vicariously through videos of the x2 until then. Don't hesitate to posted any videos cuz nothing new to say or whatever . Post 👍 👍 😆 🤣
FYI eternal life in christ 😌 He called to serve him. Always careful not to neglect salvation amen 🙏