I think u recently drained your coolant for something you did before ,so you might have air on coolant system , did you bleed it when u install your new coolant ?
Censordat yeah but why would the engine shake if he has good motor mounts. if it was bad then it would be shaking like crazy. also he should probably clean his maf sensor. cuz mine had weird idle issues and that fixed the problem
Use the carb cleaner your have or some brake cleaner and with engine idling, spray around all the vacuum hoses, air intake hose, and manifold area. If there’s a vacuum leak, the spray will temporarily stabilize the engine shaking and you have a better idea where the leak is
Still your throttle control opening from the the gold piece take out the two screws from right there you could have just a daughter control also and I'll stop the accelerating up and down
you need to put in neutral , steady rev to 3000 K rpm and keep it on 3K , till its to temparature , and then let it idle for 5 minutes , so the ECU can relearn everything again , then it should be fixed...
My first car was a Honda Accord that had the same problem with the motor shaking and all I had to do was change out the motor mounts on it and it went away
Did you drive all the way to the Rocklin, CA pick n pull? If you where in the Sacramento area, Sac City Auto parts 916-463-9111 has both fenders used for your 240sx. Plus there is an entire road full of auto parts recyclers here in the Sac area. Research Recycle Rd in Rancho Cordova. You will find everything for your 240sx there. Hope you make a video on this, I like these mini road trip vids.
My s13 did it too. The rpms would go up and would just drop and try to turn off. I have the stock intake box and the plug that connects to the intake was just loose
Jason Bourne I had same problem it was annoying. I had my map sensor replaced, gaskets, and fuel injector and something else I forgot what it was but after that it got fixed
Sonny check your coil or wires make sure they are not arking or you may have a vacuum leak. If you can hook up a scanner or a lab scoop and see if u have any stored codes. Lol my girl lives hella close to the pick&pull in Fairfield
To check if the vacuum leak spray carb cleaner around the engine and it was sucks it up the car show accelerate higher RPMs and that's how you find out if you have a vacuum leak
Question!!: i have a 90 s13 (single cam) and my idle sits at 1k-900 rpm but sometimes when im in a stop it drops to 500 and car shakes a lil. It does it all the time. Any suggestions?
You didnt even clean it. You have to take the sensor off the side of the IAC and spin the fan inside the idol control while spraying the carb cleaner so you can actually clean the bearings on the spinner wheel and any grime that is clogging the wheel and blocking it from spinning.
Give It A Bit Of Time, After Cleaning My Throttle Body It Idled High As Fuck For A Day Or Two. Anyway Do This •Clean Throttle Body •Clean MAF •Check Spark Plugs And Coil Pack •Add Some Fuel Injector Fuck It. My Shitsx Used To Shake Like That Too, But After Replacing My Timing Chain With A New Kit It Was Skraight. It Even Sounded Like How Yours Does. So Who Knows
Check the throttle body, it's probably REALLY dirty and interfearing with airflow. Get it cleaned.
Even tho is motor mounts might be bad, his engine is still on idleling properly
Motor mounts BRO!
I think u recently drained your coolant for something you did before ,so you might have air on coolant system , did you bleed it when u install your new coolant ?
Check your motor mounts bro. on my rx-8 I had the motor shaking and replaced the motor mounts and it stopped 🖒🏻
Brian Lee the problem is that his car is idling weird, as well
Censordat yeah but why would the engine shake if he has good motor mounts. if it was bad then it would be shaking like crazy. also he should probably clean his maf sensor. cuz mine had weird idle issues and that fixed the problem
Brian Lee hmmmm 🤔🤔. Idk...my be your suggestion is the answer to his problem 👍
Censordat I mean they are 2 different cars lol. so maybe different solutions?
7:02 don’t ever look me in the eyes and say that again and giggle at me: we will be throwing hands
Apolonio z 😂😂😂
Apolonio z lmao creep gang
LMAAOOo
Check out @immortalizedinc_ on instagram for fresh original clothes ! We will free your mind !
Broooo 😂😂🤣🤣🤣
Her pov of you @6:59 trying to "stick it in" when you took more than 5 minutes to. Lmfao
clean your throttle body. that’s what causes ur idle to fluctuate if it’s dirty, which it most likely will be.
Could try to bleed air out of cooling system that can cause idle to jump, can tell if ur heater isn't working good
My car barely gets heat.!!! And the water is dirty.! I wonder if that’s my issue
You already know he put that lil part in his pocket and walked out😂😂
Use the carb cleaner your have or some brake cleaner and with engine idling, spray around all the vacuum hoses, air intake hose, and manifold area. If there’s a vacuum leak, the spray will temporarily stabilize the engine shaking and you have a better idea where the leak is
Check all vacuum lines or Mass air sencer or throttle body
Still your throttle control opening from the the gold piece take out the two screws from right there you could have just a daughter control also and I'll stop the accelerating up and down
Check spark plugs and coil pack
Or o2 sensor
you need to put in neutral , steady rev to 3000 K rpm and keep it on 3K , till its to temparature , and then let it idle for 5 minutes , so the ECU can relearn everything again , then it should be fixed...
I noticed im losing power in a cold start. Car hesitates to turn on but then the idle goes up and down from 500 to 1.5 rpms.
Need to actually pull that (gold) solenoid off to clean out the junk in the port.
@Its Sonny try the throttle body and the Cold Air intake.... might be really dirty from all the drifting....
My first car was a Honda Accord that had the same problem with the motor shaking and all I had to do was change out the motor mounts on it and it went away
Was the second one you went to in Roseville ?
Did you drive all the way to the Rocklin, CA pick n pull? If you where in the Sacramento area, Sac City Auto parts 916-463-9111 has both fenders used for your 240sx. Plus there is an entire road full of auto parts recyclers here in the Sac area. Research Recycle Rd in Rancho Cordova. You will find everything for your 240sx there. Hope you make a video on this, I like these mini road trip vids.
My s13 did it too. The rpms would go up and would just drop and try to turn off. I have the stock intake box and the plug that connects to the intake was just loose
The engine mounts could be bad which can cause the idle to be rough because the engine is vibrating and moving around
You can check vacuum line but may as well do a seafoam ,clean throttle body ,or bleed the coolant system
Where'd you get that adapter for the EGR?
check pressure piston..maybe run in 3 cilinder only
or leaking ring on piston
How much insurance do you pay for your 240sx and rsx
You ever fix that idle bro? My car is doing the same thing. Cleaned out my iacv and it didn't help. Just wondering if you ever found the fix?
Did you find it ?
Look up kyle automotive he had a similar issue. But either way check your mass air flow sensor also.
Having idle problem on my h22 prelude. Has Thomas had any problems w idle surge ?
Jason Bourne I had same problem it was annoying. I had my map sensor replaced, gaskets, and fuel injector and something else I forgot what it was but after that it got fixed
check out the spark pulg
Sonny check your coil or wires make sure they are not arking or you may have a vacuum leak. If you can hook up a scanner or a lab scoop and see if u have any stored codes. Lol my girl lives hella close to the pick&pull in Fairfield
it could be the injectors, aint putting enough fuel. or check shit like pvc valve.
To check if the vacuum leak spray carb cleaner around the engine and it was sucks it up the car show accelerate higher RPMs and that's how you find out if you have a vacuum leak
Why do you take the battery off?
Y'all inspire me to start my build so much sooner
check for air leaks too...will cause motor to idle high
Check to see if all cylinders are firing
Its low on blinker fluid. Check the muffler bearings as well
daniel han hey guys, ChrisFix here 😂
Wassup Son ur hair came out best from all the illuminati boys
fg4 siRod *illiminate
Check throttle body and any vacuum lines that could be damaged
Check timing and distributor gears
Question!!: i have a 90 s13 (single cam) and my idle sits at 1k-900 rpm but sometimes when im in a stop it drops to 500 and car shakes a lil. It does it all the time. Any suggestions?
Seems like you have a similar problem as me, hopefully when I fixed mine will help yours
Did you ever fix it mines doing the same thing I’ve replaced almost every vacuum line and the pcv valve
Check Ur spark plugs maybe one might be misfiring and it causes the motor to shake..
My celica had that problem, it was a motor mount .
Yo girl 🔥🔥bro..
i had same issue for my cadillac!
Man same issue with my car. Just check you mass air flow sensor and im sure it will be ok
Check the idle screw ?
The rims on the RSX looks dope. I️ guess i was just use to the white rims
I'm having the same problem with my 240. Did you find your problem and what was the fix? Thanks.
Did you find the problem?
Fuel injector was my problem.
You was in Fairfield? LITT
Sonny you need to add subtitles 😏 I understand about 50% of the words you say bro lol much love man 👌🏾
Is300 EV 😂🤣💀👌🏾 I’m done 😂🙏🏾🤘🏽
Basic Built Hawaii lol dude I’m for real tho! watch the video again with the RUclips Subtitles and you will laugh your ass off bro 😂
11:29 sonny look like he havin a seizure
If the iac was that dirty, then you definitely need to clean the throttle body also.
I guess cats know, mine only eats fancy feast purple bag. :-)
I never see a pick and pull have so much tires
Bro I think you need to check your engine mounts that might sort out your the shaking problem
Funniest 😂 1☝️out of illiminate ! WHO AGREE WITH ME???
It looks like you have a misfire problem. I say check for a misfire. And if you have a check engine light on. Find why it's on and start from there.
Yo wtf i think that’s the 240 I pulled the dash from, if that pick n pull is in rocklin ca then it is hahaha it looks hella familiar
Make sure ur plugs are good. Sounds like one of the spark plugs is gunked up
What’s sonys 1st language? It can’t be English
Adam Is300 Vietnamese
Take of the intake manifold and paint it aluminum silver and try to replace the lines while you are at it.
My friend had a bad idle on his 335 after a race and used fuel injector cleaner and it fixed it right away!
That looks like a misfire bro. I would check for spark
You have a mean misfire. Could always check the coil packs and spark plugs. If there is oil if you take out the pack... you’re screwed.
I just bought the same shifter
You should of look for your door handle for your Honda
My 240 has the same issue
The sound effects are hilarious!
Motor mounts, vacuum hoses and spark plugs check em all
02 sensor?
“Double U dee fwarty”- in Vietnamese accent lol
You didnt even clean it. You have to take the sensor off the side of the IAC and spin the fan inside the idol control while spraying the carb cleaner so you can actually clean the bearings on the spinner wheel and any grime that is clogging the wheel and blocking it from spinning.
Seems like you have an injector issue. One injector is probably stuck open.
Either MAF or throttle body
When he said the name of the food in Vietnamese I was dead haha
Check the EGR.
I had to replace vacuum lines on my 240sx when it did that.
By a new one at carparts.com way cheaper then autozone or oriellys
PVC valve or timing
Check out the TPS because they go bad
Engine mount bro
Not saying you have he same issue but my car was shaking and it ended up being a bad injector.
Could be clogged
Check your motor mounts bro
Just get new motor mounts already
Give It A Bit Of Time, After Cleaning My Throttle Body It Idled High As Fuck For A Day Or Two.
Anyway Do This
•Clean Throttle Body
•Clean MAF
•Check Spark Plugs And Coil Pack
•Add Some Fuel Injector Fuck It.
My Shitsx Used To Shake Like That Too, But After Replacing My Timing Chain With A New Kit It Was Skraight. It Even Sounded Like How Yours Does. So Who Knows
Damn you talk fast, and that coming from a Dominican Nigga 😂😂
It’s your throttle senser
Have the same problem with my 240sx thanks for the video finna help me a lot
Just started getting into the whole 240 thing lol 😂
Felipe Hernandez did u try it? If so did it end up idling better
Check for coolant sometime if the rpm go higher there a chance that the antifreeze is low or it's need a bottle or two
You may need a major tuneup
it looks like your motor mounts are bad
Adjust the throttle and clean the body
Check fuel injectors.
Bro it your motor mounts
clean your throttle body and replace all your bushings on the motor mount
Sound like Running on 3 cylinders
Yo sonny check your injector
I had the same problem so check those out
3:17 runs like this
Looks like your motor mounts could be bad. The engine shouldn't be shaking that bad bro. Best of luck man.