INSTALLING LSD AND ISR DIFF MOUNTS ON MY GENESIS COUPE
HTML-код
- Опубликовано: 4 окт 2019
- In this video I installed an limited-slip differential in my Genesis Coupe 2.0. My old mounts were worn and I replaced them with ISR differential mounts. I installed the 4th mount as well.
Mounts are really hard to replace.
The diff is the factory limited-slip and we are replacing my old open-diff.
Thanks for Watching
If you haven't watched my other videos click on my channel or the links below to see them:
ATTEMPTING BURNOUT IN A 2019 DODGE CHARGER
• ATTEMPTING BURNOUT IN ...
Installing Tomei Titanium Cat-back Exhaust on 2018 Subaru WRX
• Installing Tomei Titan...
I BOUGHT HIM A GENESIS COUPE!!!
• I BOUGHT HIM A GENESIS...
I BOUGHT ONE OF THE CHEAPEST BMW 7-SERIES ON THE MARKET!!!
• I BOUGHT ONE OF THE CH...
INSTALLED A EXHAUST ON 2019 Toyota Camry XSE 2.5L
• INSTALLED A EXHAUST ON...
WE TRIED TO DO A BURNOUT ON THE 2019 TOYOTA CAMRY XSE 2.5 FAIL!!
• WE TRIED TO DO A BURNO...
Camry Burnout Blooper Video
• 2019 Toyota Camry 2.5 ...
POWEDER COATING MY GENESIS COUPE BREMBO CALIPERS
• POWEDER COATING MY GEN...
VOLKSWAGEN JETTA SHOOTING FLAMES
• VOLKSWAGEN JETTA SHOOT...
DRIVING FERRARI IN SNOW!!
• DRIVING FERRARI IN SNOW!!
Honda S2000 Revs and Launch!!!
• Honda S2000 Revs and L...
400HP BMW 335i REVS and LAUNCHES!!!!
• 400HP BMW 335i REVS an...
FAIL DRAG RACING IN THE SNOW MANIFOLD ALMOST ON FIRE!!!!
• FAIL DRAG RACING IN TH...
Driving Ferrari 360 Spider LOTS OF REVS
• Driving Ferrari 360 Sp...
How to Change Forge Wastegate Spring for Hyundai Geneis Coupe 2.0
• How to Change Forge Wa...
Replacing the PCV Valve on the Genesis Coupe 2.0T
• Replacing the PCV Valv...
Toronto to Winnipeg And Back Time Lapse
• Toronto to Winnipeg An...
DROVE FROM TORONTO TO WINNIPEG TO PICK UP PARTS
• DROVE FROM TORONTO TO ...
Strada Season Opener Car Meet 2019
• Strada Season Opener C...
Installing Forge BOV Spring On My Genesis Coupe
• Installing Forge BOV S...
INSTALLING THE CLUTCH ON MY GENESIS COUPE Part 1
• INSTALLING THE CLUTCH ...
INSTALLING THE CLUTCH ON MY GENESIS COUPE Part 2
• INSTALLING THE CLUTCH ...
Corvette REVS and LAUNCHES
• Corvette REVS and LAUN...
HAVING FUN DRIFTING IN THE SNOW!!
• HAVING FUN DRIFTING IN... 
Авто/Мото
Within the first 2 minutes I could tell you guys are from the GTA hahaha
nice!
Lot of rust under there, but thanks for the video!
What's the part number for the mount bolts?
You guys on the east coast?
I heard about harder bushings cracking the subframe?? Idk if this is true or not, I’m trying to find out.
I heard that was for the solid metal bushing and they start to crack the subframe. As for these mount they area hardened delrin with aluminum sleeves. Almost a year with them and so far it's good. I took off the 4th mount as it was making too much drivetrain noise.
Appreciate they reply, I was actually scared of installing these or selling them & get the ATQ kit. Did you tried anything to reduce the noise?
@@envyous6953 still a bit of noise at highway speeds but that could be due to my lsd as I never had that noise til I installed the lsd. But removing the 4th mount reduced the noise by a lot. It could vary based on your setup as well. Due to my diff there was noise. As for these mounts, they are like a stronger rubber than oem. I know there is the solid metal mounts but those will destory the subframe depending on how you drive. Then again it's a try at your own risk type thing.
@@envyous6953 did you ever end up doing the ATQ kit? I just ordered another OEM bushing to toss in the 4th slot but still may do the ATQ kit down the road because I will be reinforcing the subframe... so it'll either be the ATQ kit for the plate they have or me DIY welding plates on myself lol
is it an automatic or manual, i have an open diff 2.0 bk1 5 speed automatic. do you know if i can do such a swap
You should be able to do the swap. Only thing is the ratio for the diffs are different between the automatic and manual genesis coupes. Check the genesis coupe forum. There is information about the diffs on it.
I have the same 5speed auto. Dont car much about the lsd but how are the bushings in terms of improvements??
Also I'm not sure if u may or may not know is there a away to replace the transmission mount on these things( I know manual is everywhere but i dont know if the mount is similar)
@@bradbird8913 automatic mount is different then manual transmission. The mounts make the diff really stiff you hear more noise from the drivetrain.
Will upgrading ur diff make ur car effective on top end when roll racing
Depends top end wise you want 3.73 or 3.53 gears
Top end it shouldn’t do anything tbh. The diff upgrade is needed for launches in first
So how much did it cost to get it done, im thinking of getting one for my whip.
The lsd is a bit expensive to get. The mounts go for around 150.
@@JustRandomCars ok so the LSD you got, how would you rate the performance of it, any noticeable difference from stock to performance.
There is a big difference when going around the corner and feels more responsive.
I have a 2013 2.0t and i just bought à lsd diff from à 2013 3.8 is any canadian tire garage can really do that kind of swap ???I find it really cool that the let you film the swap would i be better off just renting à garage lift else-where