Apple Watch Ultra 1 & 2 Back Cover Heart Rate Sensor Swap

Send your device in for repair 👉 www.joesge.com...
Are you a repair ninja? Buy the parts here 👉 www.joesge.com...
Steps to fix your device.
1. Heat up the HR sensor with 100°C (212°F) air for a minute or two
2. Use a thin pry tool and a nylon spudger dipped in rubbing alcohol to carefully lift the antenna, then the HR sensor.
3. Use much patience. This repair took an experienced tech 30+ minutes to complete so expect it to take 2 hours if you've never done it.
4. Once the HR and antenna are removed, clean them and make sure the new glass is clean
5. Test fit and align the HR sensor into the center of the new back cover to make sure you know how to line up all of the connection points.
6. Put a thin line of cold press glue down for the HR sensor and set the sensor in place. Make sure that it is perfectly lined up.
7. Attach the antenna with a bit of cold-press glue.
8. clamp the HR sensor in place and let it cure for 24 hours.
9. Get back to jamming out 🎵
Hello repair ninjas 🥷 As a way to help out with the increasing demand for videos of specific repairs, we have created a membership for our channel that allows you to request 1 custom repair video per month. The video you request will be put at the top of our queue and will be uploaded as quickly as possible. The video can also be started with a shout-out if you would like that. As always, thanks for checking out our repair dojo 🥷
Join Here 👉 bit.ly/3rMJJkW
Follow us on our social media for more repair content:
Instagram 📸 - / joesge
Facebook - / joesge
Feel free to reach out to our support team with any questions your brain has developed during the watching or pre-gaming of this video:
www.JoesGE.com 📲
[e-mail] 📩
360.362.1722 📞 (Text or Call)

[@redskoob]

Awesome! Thanks!

[@Joesge]

Hope this helps Tony.

[@redskoob]

@@Joesge definitely does! Don’t need to do the return now! Did my order from eBay come with all the adhesive and tools?