I never seen this guy in my life but I'll be honest, I don't even own a jetski but I want to own one just to bring it to this guy to fix! I really like him😂
For those asking if this is under warranty, I have a 2022 gtx 230. This same exact thing happened to mine. It was not modded and seadoo did agree to cover a whole new engine. The manufacturer warranty that comes with the skis is typically only 1 year. However I pre-ordered my ski when I bought it. Seadoo had a promo for preorders offering an additional year for warranty. Thank god, mine failed 1 year and 3 days at 65 hrs. I guess what I’m trying to say is, if you want it modded, you should just wait till it’s out of warranty to make sure this type of thing is t going to happen.
1:04 have an Aeromotive regulator on my diesel truck. First diaphragm was in for about 20 years (red in color) no issues. I only drive that truck 5k/year but it was exposed to the fuel the entire time. I replaced it last year as a PM and the new ones are blue.
I actually started to look at the housing off the fuel regulator in the inside it was a little sharp on the edge so I polish it a little bit. We’ll see if that makes a difference.
Funny you pointed that out with the front bolt on the intake grate. I have a 22 as well and i just swaped a riva grate on it and that front bolt with the locnut was hand tight as best. Not as loose as that one but still was concerning. I am going to re check it every couple hours.
Funny how you said the 02's are slower. My buddies 02 rxpx seemed to get slower after break in. Dealer said his coolant cap was loose, that was the problem .lol
Wow, I can't wait to see this build. I'm working on my 1503 with a broken chain, and I'm trying to do something like this. Is there any way you can consult for my build, and I can compensate for your time
Do you think when the engine locked up at 50mph and the ski came to a sudden stop it could have grabbed that scoop grate and pulled the bolt down into the fiberglass causing it to become slack? I don’t think it could have stretched the grate bolt. Or do you think it could have just been loose from not tightening it up? Pretty big damage to open a case up to. You and JP are always working on sone newer skis. Now it’s definitely not a dis towards you, the ski is probably better off with you guys but don’t some of these ski have warranty? I know that once you “modify” them it voids it but sometimes a dealer works with the customer to get stuff covered. Granted the dealer isn’t going to build a mod engine for them neither. Great stuff though.
I had my 2023 RXPX Apex lock up on me at 21 hours with water in the motor dealer says blown motor blown supercharger but has no explanation on why this happened. Friday I’m supposed to be getting it back. I hope I get an answer Good Work as usual!!
Helps to carry a fluid line clamp ($5 harbor freight!) so if you have to tow it, you can clamp the exhaust over tube, the one that goes over the top of the other one!
Because it was a stage 3 when you mess with the engine like that no way warranty is going to cover a engine also he was spinning 8700 rpm’s which is 700 more than a factory engine.
That's why I only did intake and exhaust on my 2016. Those high rpms make me nervous. I just want it to work when I get on it. if I want to go really fast I just ride my bike. Good job on editing or cloning.
I have doo2021 it left me in the water 2 times but it doesn't turn on I changed the relay to turn it on but it came back and it was the same after I used it 4 times I took it out of the water I took out the relay I put it on and it turned on that you think it can be the problem?
Can I safely use 87 octane on my RXT 230? I know the rating says you can but will it break down my pistons over time? I really need to know from you please and thanks.
H Cala , i got a tophy back in feb., been i the water 3 times, and i find it too tail loose when i ride with a passenger, my last ski was an SP 96 and that sky always had traction. i cant comprehend why a bigger hull is too tippy and tail loose . what can i do to it beside sponsons to keep it tracking .
Hey there, love your videos! I have a 2004 Seadoo GTX 185 supercharged. Unfortunately the engine locked up on me while I was riding it. I thought maybe the battery died. After 2 months in the shop, I was informed that it's likely crank. It cranks but it's like it cranks once, then twice, then once so and so on. Do you have any opinions or thoughts ? Would be greatly appreciated!
It’s very hard for me to diagnose some thing very little information or without seeing it but I know that 04 had issue with exhaust valves breaking maybe you should start with a compression test
@calasworld Thanks for the reply! I will do a Compression test. Do you know what PSI is normal? Also if it helps, I can upload a video of what it's doing. I really do appreciate the feedback, it's hard to find anyone who works on sea doos in my area.
I Don’t think it was a defective Conrod bolt, what I think happened is the engine took in water and hydro locked the cylinder, and then detonated the connecting rod.
Hi ernesto! i have an issue with my 08 rxp x , i try to start it up with the start/stop button and it doesn,t work once i try with cables it starts OK ( i know that is harmfull but just to test it was ok) once i turn it off with the start stop button it stops normally, we check selenoid and replace it and still the same issue, we check the startstop cable and might be OK , something a little bit strange is when i push the stop button it accelerates a little bit, also the strange thing is how the button works to stop the engine and not turn it on? thanks for your help!
I never seen this guy in my life but I'll be honest, I don't even own a jetski but I want to own one just to bring it to this guy to fix! I really like him😂
This keeps me up at night something Maintenance and all the care in the world cant prevent
RXP - 300 Sea Doo JetSki I will buying at the next year's with new once .
Best intro yet bro
For those asking if this is under warranty, I have a 2022 gtx 230. This same exact thing happened to mine. It was not modded and seadoo did agree to cover a whole new engine. The manufacturer warranty that comes with the skis is typically only 1 year. However I pre-ordered my ski when I bought it. Seadoo had a promo for preorders offering an additional year for warranty. Thank god, mine failed 1 year and 3 days at 65 hrs. I guess what I’m trying to say is, if you want it modded, you should just wait till it’s out of warranty to make sure this type of thing is t going to happen.
Also, I love your videos. Thank you for making great content and not glossing over steps as you diagnose problems. A+++++
Thank you I try it’s hard when you are a one-man show
As far as this JetSki, it has a little over 70 hours 🤦♂️
Love the technical content. Your videos keep getting better and better. Thank you for taking the time to make these.
1:04 have an Aeromotive regulator on my diesel truck. First diaphragm was in for about 20 years (red in color) no issues. I only drive that truck 5k/year but it was exposed to the fuel the entire time. I replaced it last year as a PM and the new ones are blue.
I actually started to look at the housing off the fuel regulator in the inside it was a little sharp on the edge so I polish it a little bit. We’ll see if that makes a difference.
Hahahaha that funny when you work with the doble 😅😂😂💪🏼💪🏼💪🏼 good editing
Busy busy... thx for the time u spend sharing brohamsta😊
Double Calas 😂...classic
I love this channel!
Another Great and fun video , also with a Special Guest appearance from Ernesto Calas 👍🏼👍🏼👍🏼😀
Another great video! 🤙🏽
Loved the video! Subscribed!!!
another great video, like the detail of explaining what went wrong, just wanted to say great job and enjoyed the video👍
Funny you pointed that out with the front bolt on the intake grate. I have a 22 as well and i just swaped a riva grate on it and that front bolt with the locnut was hand tight as best. Not as loose as that one but still was concerning. I am going to re check it every couple hours.
Good ole Seadoo quality control🤦♂️. Great video!
Love your videos man❤️👍🏻👍🏻
Hey calas how much HP would or should you get from a stage 3 kit.
Thanks
Thank you for showing us what happened!
Lol I see what you did there 😂
Keep up the good content!!!
Please do a video on that bellow please.... We definitely NEED that video
exelente video como siempre ! grande calas !
Thanks for you videos 🦾🦾😎
Great content love the video.
I like your video you can make a video how you recommend to flushing the jetski on saltwater for the person that are newer on this?
Are the slow skies down on RPM? Seems like if they hit the RPM given same impeller then it's not down on power.
If only i lived in florida im in texas about to get a Rxp x 300 2021 u got a new subscriber maybe in the future ill get some work done by Calas👍🏻
Students please take a seat and learn from the master🙏🏼🤨
Funny how you said the 02's are slower. My buddies 02 rxpx seemed to get slower after break in. Dealer said his coolant cap was loose, that was the problem .lol
Never use a torque wrench to break torque!
Another awesome video 🔥 What would the best way be to check if the con rods are bent?
this channel is making me second guess whether to go with the supercharged seadoo. seems like engine problems are common, even with the brand new ones
Is that not under warranty?
Wow, I can't wait to see this build. I'm working on my 1503 with a broken chain, and I'm trying to do something like this. Is there any way you can consult for my build, and I can compensate for your time
be good to run a yamaha or kawazaki drive line umm man that thing got a lot off washed spun water and oil. love your work calas.
Do you think when the engine locked up at 50mph and the ski came to a sudden stop it could have grabbed that scoop grate and pulled the bolt down into the fiberglass causing it to become slack? I don’t think it could have stretched the grate bolt. Or do you think it could have just been loose from not tightening it up? Pretty big damage to open a case up to. You and JP are always working on sone newer skis. Now it’s definitely not a dis towards you, the ski is probably better off with you guys but don’t some of these ski have warranty? I know that once you “modify” them it voids it but sometimes a dealer works with the customer to get stuff covered. Granted the dealer isn’t going to build a mod engine for them neither. Great stuff though.
should have ordered me one for my truck !
I had my 2023 RXPX Apex lock up on me at 21 hours with water in the motor dealer says blown motor blown supercharger but has no explanation on why this happened. Friday I’m supposed to be getting it back. I hope I get an answer Good Work as usual!!
Helps to carry a fluid line clamp ($5 harbor freight!) so if you have to tow it, you can clamp the exhaust over tube, the one that goes over the top of the other one!
Just curious. Would this be something covered under the warranty?
Because it was a stage 3 when you mess with the engine like that no way warranty is going to cover a engine also he was spinning 8700 rpm’s which is 700 more than a factory engine.
That's why I only did intake and exhaust on my 2016. Those high rpms make me nervous. I just want it to work when I get on it. if I want to go really fast I just ride my bike. Good job on editing or cloning.
I have doo2021 it left me in the water 2 times but it doesn't turn on I changed the relay to turn it on but it came back and it was the same after I used it 4 times I took it out of the water I took out the relay I put it on and it turned on that you think it can be the problem?
Saludos quisiera saber las fechas de los Hidrodrags este año gracias…
Oct 14 - 15
Amazing content. ¡ Showing us all the engine disaster ! 😮
Can I safely use 87 octane on my RXT 230? I know the rating says you can but will it break down my pistons over time? I really need to know from you please and thanks.
What is the reason for going like an injector?
H Cala , i got a tophy back in feb., been i the water 3 times, and i find it too tail loose when i ride with a passenger, my last ski was an SP 96 and that sky always had traction. i cant comprehend why a bigger hull is too tippy and tail loose . what can i do to it beside sponsons to keep it tracking .
Is it out of factory warranty?
Hey there, love your videos! I have a 2004 Seadoo GTX 185 supercharged. Unfortunately the engine locked up on me while I was riding it. I thought maybe the battery died. After 2 months in the shop, I was informed that it's likely crank. It cranks but it's like it cranks once, then twice, then once so and so on. Do you have any opinions or thoughts ? Would be greatly appreciated!
It’s very hard for me to diagnose some thing very little information or without seeing it but I know that 04 had issue with exhaust valves breaking maybe you should start with a compression test
@calasworld Thanks for the reply! I will do a Compression test. Do you know what PSI is normal? Also if it helps, I can upload a video of what it's doing. I really do appreciate the feedback, it's hard to find anyone who works on sea doos in my area.
Wow what a major failure! Can’t wait for the next episode
I Don’t think it was a defective Conrod bolt, what I think happened is the engine took in water and hydro locked the cylinder, and then detonated the connecting rod.
No water
What is the price difference between a complete rebuild motor and vs a new one?
A price of a new one is over $5000. A rebuilt can cost you from 1500 and up
Hi ernesto! i have an issue with my 08 rxp x , i try to start it up with the start/stop button and it doesn,t work once i try with cables it starts OK ( i know that is harmfull but just to test it was ok) once i turn it off with the start stop button it stops normally, we check selenoid and replace it and still the same issue, we check the startstop cable and might be OK , something a little bit strange is when i push the stop button it accelerates a little bit, also the strange thing is how the button works to stop the engine and not turn it on? thanks for your help!
Quiero un Sea-Doo para ganar a mis amigos en Kentucky
Seadoo right eh
This is y u only buy Kawasaki ultra 310 💯 made in America 🇺🇸
Me podría pasa su numero de teléfono porfabor