I learned so much watching this! Going to purchase an extruder now! I have recently started baking my posts into the clay and love it, but this liquid clay is very intriguing! What brand is it?
Thank you so much for watching 🥰 Yes either sculpey liquid clay or, bake n bond (which is a little thicker) will work really well! Also extruders are amazing! A lot you can do with them.
Brooke Todd thank you 🥰 absolutely! You can simply add the earring posts with a super glue without adding liquid clay and covering it with clay. I just like the finishing this way because the post is blended on to the earring.
@@FernMitchHandmade but won't the cutter melt. Is it appropriate to do so. N another q I am using a homemade clay ,so how much time do I need to bake in oven(in c not f pls) ANSWER PLS
NAVARATAN JAIN You can try it with homemade clay but I have only experienced with store bought polymer clay. There for I cannot give you an opinion about them.
hello. what clay do you use? you said you bake it for an hour. Isn't it too long? just know that every tipe of clay is required 30 min. max of baking time. thank you for tutorial.
I love your videos!! I tried hoops for the first time today, baked at 275 for 1 hour and then after they cooler I did the clay bending test that I do with other shapes to make sure they are nice and strong and they broke. Do you ever test yours and if so, do you know why they may be snapping?
Thank you 🥰 Mine are usually very flexible. I leave hoops in the oven to cool down. Do you use an oven thermometer? Make sure your temperature is correct. Also try leaving it a little longer, maybe because hoops are little chunky it takes longer.
Hello girl thanks for your video and Im a new subscriber. And also Im starting to do earrings. You have a very nice earrings. Could You please make more videos and I been having a little problem with my clay I can see it has bubbles when Im trying to manipulate it and also when I put it in the oevn.
Hello 🥰 I’m so glad you are enjoying my tutorials. To avoid bubbles make sure you condition your clay well. Sometimes way too soft clay trap air and create bubbles too! If you have soft clay, leave it on a piece of printer paper for 20mins. It should take off some moisture. If you see some on your raw clay just pop it off with a needle and blend. For baked pieces you can sand it. I hope this helps 😊
Make sure you condition your clay very well. Fimo is notorious for being hard to extrude. You can add a drop of baby oil to make your clay soft. I hope this helps.
It's difficult to see what you are doing because there is a lot of grit on your lens or something. Also, your hands are not on the screen a lot of the time so I can't see what you are doing. Pretty earrings.
Most makers do it for at least one hour. Just what we found out from our experiences. As long as you keep your temperature steady around 225-275F (use a thermometer) you cannot burn polymer clay.
This is exactly what I was looking for. Thank you so much!
You are very welcome 🥰
I absolutely love it when youtuber’s respond to comments!! Thank you for the tutorial really handy
It’s all my pleasure! Thank you so much for watching 🥰
I never thought to bake with the clay on the cutters. Thank you for the tutorial.
Thank you! I’m glad you enjoyed it 🥰
Same here
Your so nice and generous to share all your tips ! Your so sweet in responding to my questions too ! I appreciate it so much . Thank you ! 🤗
My pleasure! I love getting to interact with my audience. Thank you for watching 🥰
Thank you so much for showing us how to do hoops!
My pleasure 🥰
I love how you attached the earring back... that’s what I was having trouble with!
Yay! I’m glad you enjoyed the technique 🥰
Wonderful tutorials as always! Thanks for sharing?
Thanks for watching 🥰
Loved this tutorial! You deserve all the views and subscribers 💞💞
You are too kind. Thank you 🥰
Me ha encantado el video. Muchas gracias. Estoy empezando y la explicación ha sido muy clara. 👏👏
Thank you for watching 🥰
Wow, these are nice!!
Thank you 😊
I love your work!! Thank you!
Thank you for watching 🥰
Thank you very much, I will definitely give these a go. :)
Yes! Thank you for watching 🥰
Perfect for me, thanks so much
Awesome! You are welcome 🥰
Very lovely hoops
Thank you 🥰
Love your videos!!!
Did you bake the earrings attached to the cookie cutters?
Thank you so much 🥰 yes I baked them with the cookie cutter attached.
@@FernMitchHandmade thank you!!! ❤
Beautiful
I learned so much watching this! Going to purchase an extruder now! I have recently started baking my posts into the clay and love it, but this liquid clay is very intriguing! What brand is it?
Thank you so much for watching 🥰 Yes either sculpey liquid clay or, bake n bond (which is a little thicker) will work really well!
Also extruders are amazing! A lot you can do with them.
😍😍
Such a cute idea! You may have answered this but are you propping the cookie cutter up with something so it does not roll while baking? Thanks!
Just lay it down flat, not on its curved edge.
The cookie cutter is a life saver! Thanks for this :) btw, can I use an oven toaster for polymer clays?
I know right! My pleasure 🥰 Yes! Those are perfect for curing polymer clay. Make sure you keep a thermometer just in case.
@@FernMitchHandmade this is noted! Excited to create poly earrings too! your page is a big help!! Thank youuuu so much
pretty! do you have to use liquid clay or could those pieces be attached after the clay is baked with the regular glue adhesive??
Brooke Todd thank you 🥰 absolutely! You can simply add the earring posts with a super glue without adding liquid clay and covering it with clay. I just like the finishing this way because the post is blended on to the earring.
Do u need to put the clay with cookie cutter in the oven or u need to remove it from cookie cutter n put it in oven. pLS ANSWER
NAVARATAN JAIN with cookie cutter
@@FernMitchHandmade but won't the cutter melt. Is it appropriate to do so. N another q I am using a homemade clay ,so how much time do I need to bake in oven(in c not f pls) ANSWER PLS
Use metal cookie cutters! Do not use plastic. I don’t think you can homemade clay. Only manufactured polymer clay.
@@FernMitchHandmade ok so I should use store bought polymer clay ryt?
NAVARATAN JAIN You can try it with homemade clay but I have only experienced with store bought polymer clay. There for I cannot give you an opinion about them.
hello. what clay do you use? you said you bake it for an hour. Isn't it too long? just know that every tipe of clay is required 30 min. max of baking time. thank you for tutorial.
Where do you get you earring backs, jump rings, and other various finding for earrings.
Thank you!
My pleasure 🥰 thanks for watching!
Thank you for sharing! 🤗 Can you use sculpey bake 'n bond instead of liquid polymer clay to attach the back of the earrings? ☺️
My pleasure! Absolutely. It might even be better!
Do you just put the cutters in the oven or do you put them on a baking pan and then put them in the oven?
Yup! I put the cutters in the oven on a baking pan 😊 it holds the shape well.
Hi! Loved your video! Those pieces you attach at the end can be baked? Don't they melt? Thank u!!
Thank you 🥰 Absolutely! The temperature we are using isn’t high enough to melt metal.
So pretty 😍.. Can we use wood varnish on polymer clay? Plz reply.. I can't understand which type of varnish I need 🙁
Thank you 😊 I’m not sure what you meant by wood varnish but if it’s water based polyurethane, absolutely!
Hola! pones los hoops con el molde redonda en el horno? o las retiras del molde?
Muchas gracias ♥
Yes! 😊 I put them in the oven.
Very nice and easy but I don't see the marble affect. I just see gray.
Thank you! It’s very faint on these ones.
Beautiful ❤️
Thank you 🥰
How do you stop it from having mini cracks in the clay after you use the excruder? I’ve really tried to condition it but doesn’t seem to be working!
Make sure your clay is nice and soft. Soft clay won’t get cracks.
Nice video! How do you avoid fingerprints in the clay?
Thank you 🥰 I use rubbing alcohol to clean the pieces before I bake.
Hi. Is there any way to avoid cracks on the clay with the extruded?
Make sure your clay is soft! Condition it well 😊
What size is the cutter ? Is it like 1.5 inches ?
I think it’s about 1.25” 😊
Hello just wondering how come your clay doesn't come out cracked? Do you use Fimo soft?
Clay is not supposed to crack if you condition them very well 😊 I do use Fimo but Premo and Soufflé are my go to.
Just a question, do you bake them while on the cutter?🤔
Yup, the temperature is low enough not to melt the metal 😊
😍
What size circle cutter is that?
It’s about 3.2cm
WHAT IF I DO NOT HAVE AN EXTRUDER? ANY TIPS?
Forsaken Knowledge Yes! You can always roll out snakes that are even width.
how long did you bake them for?
I baked them for about 45mins to an hour. I recommend you bake small samples to figure out your ideal temperature and time 😊
can you also use air dry clay to make those earrings?
I think for hoops, you should be able to 😊
How long do you leave then in the oven and what temperature?
I leave mine in the oven for an hour. For temperature I recommend looking at your clay packaging. Every clay is different.
Where can I buy an extruded? And do I need it?
Hello, I have the link to the extruder in the description. Any big box craft store will have it. Not necessarily. You can make an even snake by hand.
hello there its sneha from mauritius, i've a question! for how many min you put it in the oven? or can we use a microave??
Unfortunately you cannot bake clay in a microwave. I baked these for 1hr in 225-250F
Do we have any other alternative of keeping them in oven?
You can fuse the edges of the hoop together and make a complete circle. This way you won’t lose the shape
What type of clay are you using that you baked for an hour at 225?
It’s Premo and soufflé. I bake mine at 225F due to the spikes on my old oven.
I love your videos!! I tried hoops for the first time today, baked at 275 for 1 hour and then after they cooler I did the clay bending test that I do with other shapes to make sure they are nice and strong and they broke. Do you ever test yours and if so, do you know why they may be snapping?
Thank you 🥰
Mine are usually very flexible. I leave hoops in the oven to cool down. Do you use an oven thermometer? Make sure your temperature is correct. Also try leaving it a little longer, maybe because hoops are little chunky it takes longer.
Can you link the extrude tool?
Link’s in the description box
Hello girl thanks for your video and Im a new subscriber. And also Im starting to do earrings. You have a very nice earrings. Could You please make more videos and I been having a little problem with my clay I can see it has bubbles when Im trying to manipulate it and also when I put it in the oevn.
Hello 🥰 I’m so glad you are enjoying my tutorials. To avoid bubbles make sure you condition your clay well. Sometimes way too soft clay trap air and create bubbles too! If you have soft clay, leave it on a piece of printer paper for 20mins. It should take off some moisture. If you see some on your raw clay just pop it off with a needle and blend. For baked pieces you can sand it. I hope this helps 😊
Does anyone’s clay crack when it comes out thr extruder?
Make sure you condition your clay very well. Fimo is notorious for being hard to extrude. You can add a drop of baby oil to make your clay soft. I hope this helps.
@@FernMitchHandmade any tips of trying to condition it well enough? I don’t have baby oil I cornflour okay?
Any mineral oil would work and also If you have any liquid clay you can try adding that. I believe cornflour will make it dryer.
It's difficult to see what you are doing because there is a lot of grit on your lens or something. Also, your hands are not on the screen a lot of the time so I can't see what you are doing. Pretty earrings.
one hour??? ive been told to never cook over 30 minutes
Most makers do it for at least one hour. Just what we found out from our experiences. As long as you keep your temperature steady around 225-275F (use a thermometer) you cannot burn polymer clay.