2:11 Select the points to be transformed, then do one of the following: Hold T and drag to twist. Hold S and drag to scale. Hold X and drag to scale horizontally only. Hold Y and drag to scale vertically only. Hold O and drag to offset the points perpendicular to the tangent. by one pixel at a time by using the Ctrl+Shift+Arrow keys left and right and the up and down arrow alone for up and down. Hold Alt and klick nearby take poits next.
Thank for the video. Note: In 18.5 you will need to add a background node in between your BSpline and merge nodes. This will then make your mask visible like in the video.
Drag and drop a background node between the ProtoV2_Effect and the Merge node. Under settings for the background note set the channel to Alpha. Set the color for the background node that you want@@patryko7119
To get everything to work with davinci 18.6 you need to do your polygone or BSpline into a background node then into Proto v2 then into the merge node. Hope that helps
This is awesome (if I can get it working)...at 2:42. when you connect the B Spline to the Merge Node...your circle turns white and become solid. That doesn't happen for me, and as such, nothing after that step is working either. Any thoughts? As far as I can tell, I am doing this in the same sequence as the video....sweet technique!
I think with the addition of 18.5 , it makes this as well as alot of other Pre 18.5 Tutorials from most channels difficult to follow step by step. Maybe that's just me, but it seems like alot of things have moved around and changed since 18.5 came. And for a Brand New person to D.R it kinda makes alot of tutorials a little more difficult. Like we cant follow Step By Step anymore because its not the same anymore.... But once I figure out the basics ill definitely return to this tutorial.... 😅
I Switches to Davinci about a Montag ago and have been so overwhelmed by it but your tutorials are definitely making it easier thank you 💪🏻 my problem now is that my iMac can’t keep up with davinci so I’m in the market for a new one do you have any tips on what specs i would need for a nice experience without getting frustrated 😂
@@iambenji_1 so I should focus more on a better gpu than the ram? I’ve been looking at the new MacBook Pros 30 core gpu and 38 core gpu am I even going to notice a difference in the 2?
Everything is perfect until putting the actual effect in. No matter what I do it just stays as the little white worm going around, none of the installed packs or even built in effects changes anything at all, no matter what I select in them, please help! Yours just simply... works... straight away... but how? What else do I have to do that you haven't shown in the video to get the effect to appear?
@@AndreyMynka I have the same problem - B-spline animation works normally, there just almost any effect from ProtoV2, just a slight Worm-like shadow around the Bspline
Thank you for the video. Just installed DaVinci to a long switch journey from Hitfilm Pro, to Premiere and now this one. I was delaying it until I got myself a good editing machine and finally I did. So... thanks for these tutorials.
Consegui fazer o efeito nem acredito! Desde que comecei a editar tinha vontade de fazer algo parecido e hoje consegui, muito obrigado. Você é um excelente professor e profissional.
You immediately established that it is free! You convinced me to subscribe to your channel with those words..and gave me confidence to download and use Resolve. Thank you, so much, for sharing.💪🏿
This is awesome (if I can get it working)...at 2:42. when you connect the B Spline to the Merge Node...your circle turns white and become solid. That doesn't happen for me, and as such, nothing after that step is working either. Any thoughts? As far as I can tell, I am doing this in the same sequence as the video....sweet technique!
When Im connecting my Bspline node to merge node its not showing white spot And border too after undoing solid ? Did I miss something ? Can you please help me..
Okay, I followed every single step, and not getting the effect. Do I need to set my DR in certain way in order forme to view the video(background) and the "white" line at the same time? Because all I see is my "green" B-Spline. However, I kept going -- got the PROTO V2 -- the Electro -- just to see if I get any effect. None. I got nothing from all the steps I followed. Well, not completely true....I do see the green B-Spline I created. Correction: I see the issue. My ProtoV2 node is not connected to the B-Spline node. I am unable to connect those 2. Any suggestion, Jamie?
I constantly fail to install Proto, to the fusion panel to be precise. Proto V1 works at the "Edit" panel, but not Proto V2. In fusion panel none of those work. Any ideas what might be the hurdle and how to fix it? I would be beyond grateful.
im trying it out right now and i am on round about 2:45 but my line dont show, i only have the green line where i can change the position but not the line in the circle that rotate later. pls help
Had the same problem and saw a response from @justinchang3573, that you need to "do your polygone or BSpline into a background node, then into Proto v2 and then into the merge node". I've managed to see the BSpline now but I haven't fully tested it yet!
fusion is really tough to understand. I tried some of your effects previously step by step but something keeps going wrong. and I have no clue what. Given up basically
Practice and understanding the basics helps. Remember, I was in your shoes one day. And when I was learning this stuff no-one was making tutorials like this.
Hey man, thanks for putting together this great tutorial. Loving your content. I'm new to davinci and working in fusion. Is there a difference in doing effects in a fusion comp on Log footage in your timeline, or would you have better results with tracking etc if you were to grade and render the clip first before making a fusion comp for you effects? I see that you are working on graded clips. not sure if you shot these in log first or not. Just trying to wrap my head around the workflow. Thanks!
Hi ! great tutorial ! Could you explain how to color the clip afterwards WITHOUT affecting the proto effect ? I tried with different media out from a multi merge node in fusion but it doesn't work. Thanks a lot !
I dont know why but when I get to the part at 243 and connect the bspline and the merge node, I don't get that white blob...what could be the issue?? Please help im desperate lol
Hi, if I connect PROTO, the BSpline color remains white and I can't change it even in the "Colorize" settings. Does anyone have the same problem? Can you advise me how to do it? Thank you!
hey Jamie, my b spline is not working, when I mask it all out and merge it the solid layer doesnt seem to work, in your case when you merge bspline the masked area automatically gets white after deselecting solid it becomes normal having a line on the masked area. but when I do all of the above, merging it doesnt seem to whiten the mask area so the white lines doesnt seem to appear. kindly reply what seems to be the issue.
@@fpsbajwa6851 ruclips.net/video/h62x-kSKQpU/видео.html This solve my prob. What you need to do is go through the whole process and at the end add proto after bspline. Thank me later 👻💯
When Im connecting my Bspline node to merge node its not showing white spot And border too after undoing solid ? Did I miss something ? Can you please help me..
Had the same problem and saw a response from @justinchang3573, that you need to "do your polygone or BSpline into a background node, then into Proto v2 and then into the merge node". I've managed to see the BSpline now but I haven't fully tested it yet!
Hey Jamie, when I connect the BSpline to the merge node it doesn’t remove the image as shown in ur video (like I can’t see the object outline) . U hav any fix?. I did this effect in 3 other videos and it worked incredibly well, but idk what happened to it now. Great tutorial as always
Great Tutorial as always 🙏🏻 But guys, I have a problem: My proto has a resolution of 1920x1080 and when I use it in a 4K timeline i have hard edges where the 1080p resolution ends in the 4K footage. Can I resize proto v2 to 4K also?
the proto v2 pack is not working for me? an error msg of warning unknown tool found is popping up and cannot find the proto tool in the fusion page, help?
Great videos. Newbie to DaVinci. I don't have the paint mode when in fusion. Does that only come with paid version? Either I'm blind or it's not there lol.
Thank you SOOOOO much for stating that it can be done with the free vs paid. So many tutorials leave that out and 3hrs later you realize it just can't be done.
Hello, I watched yout tutorial about Epic Neon Effect, I have a problem with add efect "Proto" to bookmark "tools", Thanks in advance, if you could show me how it's done
Hello my friend, excellent tutorial. I have a problem, when rendering the effect does not appear. the video is rendered without the effect, do you know what could be causing this?
Hello, can anybody help? at 5:06 there is a cut and he have the cool lines effect but for me it do nothing. I don't know how he show it. I'm a beginner so there may be just a case to tick or something like that ?
When you are walking around the car are you in FPV mode and following the lines or are you doing half moon circles with a steady horizon and editing the movement in post?
2:11
Select the points to be transformed, then do one of the following:
Hold T and drag to twist.
Hold S and drag to scale.
Hold X and drag to scale horizontally only.
Hold Y and drag to scale vertically only.
Hold O and drag to offset the points perpendicular to the tangent.
by one pixel at a time by using the Ctrl+Shift+Arrow keys left and right and the up and down arrow alone for up and down.
Hold Alt and klick nearby take poits next.
Thank for the video. Note: In 18.5 you will need to add a background node in between your BSpline and merge nodes. This will then make your mask visible like in the video.
good evening, how do we do this?
Hi, can you tell me how to do it? Thank you
Drag and drop a background node between the ProtoV2_Effect and the Merge node. Under settings for the background note set the channel to Alpha. Set the color for the background node that you want@@patryko7119
i was wondering why its not showing like in video...
Appreciate it 🙏🙏
Underrated Davinci tutorial channel. Jamie deserves more subs!!
bro whattf be honest bro
It was just a compliment, as in despite whatever number he has at the moment, he still deserves more.
This is wicked fam! 🔥🔥🔥
Please consider doing a tutorial for the car cloning at the beginning of this tutorial. 🙏🏽
To get everything to work with davinci 18.6 you need to do your polygone or BSpline into a background node then into Proto v2 then into the merge node. Hope that helps
Can we track this mask or should we manually adjust it
I have 18.6 and didn't have to do this at all. I'm on MacOS though if that matters.
thnks bro
@@TheMythicalPastany answer regarding your question?
Incredible video . Guess who will be making neon lines everywhere now . Thank you for this tutorial and have a lovely week everyone 🙌
Thank you for saying that in the beginning. I've learned when you plan your shoot for the desired effects it makes things so much easier.
Absolutely!
Hey Jamie how do you do the effect on 0:02 ? The one you multiply the car 4 times
This was what I’ve been trying to do and u made it look so easy! 🙏🏽
Your every lesson is SUPER 👍👍👍
Great tutorial, Jamie. Thank you.
I really want to make the switch from Final Cut to Davinci.
The opportunities with Davinice seem almost limitless
Transition at 40s is highly underrated....good stuff
💯💯💯
when i connect BSpline with the merge note there is no solid field and also no lines
Connect it to the green arrow, not the blue alpha channel
@@willspeno Not working
@@willspeno thank you! This worked.
@@willspeno Thank you! Was wondering what the heck was going on.
This is awesome (if I can get it working)...at 2:42. when you connect the B Spline to the Merge Node...your circle turns white and become solid. That doesn't happen for me, and as such, nothing after that step is working either. Any thoughts? As far as I can tell, I am doing this in the same sequence as the video....sweet technique!
I think with the addition of 18.5 , it makes this as well as alot of other Pre 18.5 Tutorials from most channels difficult to follow step by step. Maybe that's just me, but it seems like alot of things have moved around and changed since 18.5 came. And for a Brand New person to D.R it kinda makes alot of tutorials a little more difficult. Like we cant follow Step By Step anymore because its not the same anymore.... But once I figure out the basics ill definitely return to this tutorial.... 😅
Connect it to the foreground of the merge node by holding alt. But the Proto doesn't work for me either so idk about that
Love your tutorials! I installed Proto… Can’t find the effect after installation. Pls advise?
And another bomb video. Awesome effect.
Thanks man!
I Switches to Davinci about a Montag ago and have been so overwhelmed by it but your tutorials are definitely making it easier thank you 💪🏻 my problem now is that my iMac can’t keep up with davinci so I’m in the market for a new one do you have any tips on what specs i would need for a nice experience without getting frustrated 😂
Haha I feel ya. I bought a new laptop and it’s made my life so much easier 😂
@@JamieFenn would you say 32gb of ram is enough for a consistent workflow in davinci?
@@robertcvsh Resolve is all about GPU!!!
@@iambenji_1 so I should focus more on a better gpu than the ram? I’ve been looking at the new MacBook Pros 30 core gpu and 38 core gpu am I even going to notice a difference in the 2?
@@robertcvsh
Not that much!!
The 30 core will be even enough!
Everything is perfect until putting the actual effect in. No matter what I do it just stays as the little white worm going around, none of the installed packs or even built in effects changes anything at all, no matter what I select in them, please help! Yours just simply... works... straight away... but how? What else do I have to do that you haven't shown in the video to get the effect to appear?
it's the same with me.
Enable keyframes
What happened now is it working or not please tell me mine is not working at all
@@AndreyMynka I have the same problem - B-spline animation works normally, there just almost any effect from ProtoV2, just a slight Worm-like shadow around the Bspline
@@mitjapodbregar6398 hey, did you find a solution for this?🙂
Thank you for the video. Just installed DaVinci to a long switch journey from Hitfilm Pro, to Premiere and now this one.
I was delaying it until I got myself a good editing machine and finally I did.
So... thanks for these tutorials.
Great to hear!
Jamie with another banger
My dude thank you 🙏🏼
Bangin' as always, Jamie 🤟🙏🏻
The tracking was lit ! just tried it out, so easy and cool !
Consegui fazer o efeito nem acredito! Desde que comecei a editar tinha vontade de fazer algo parecido e hoje consegui, muito obrigado. Você é um excelente professor e profissional.
That’s awesome. Good job and thank you for the kind words! 🙏🏼🙏🏼🙏🏼
Before I even watch this video am commenting how STOKED I AM TO WATCH IT!!! ❤
Hahaha thanks man I really appreciate it! 💪🏽
You immediately established that it is free! You convinced me to subscribe to your channel with those words..and gave me confidence to download and use Resolve. Thank you, so much, for sharing.💪🏿
Welcome aboard! Hope you enjoy all the vids!
@@JamieFenn how can we get it for straight line. to make in circle its ok . but i dont understand how you are making it in lines ?
I saw other channels do this, but this is so much easier,,,, thanks,,,
The song in the beginning sounds like "Cry for you" by September. Great content as per usual
Man, i gonna use this in my next project. Thanks Jamie. Great job as always.
Great! Thank you bro. I already knew the technique but you gave me some extra good points. Refreshing.
Thanks man I really appreciate it
This is awesome (if I can get it working)...at 2:42. when you connect the B Spline to the Merge Node...your circle turns white and become solid. That doesn't happen for me, and as such, nothing after that step is working either. Any thoughts? As far as I can tell, I am doing this in the same sequence as the video....sweet technique!
same issue!
Same bro
make sure it goes to the green arrow
@@boenje YOU SAVED MY LIFE!!! #comment_section_has_the_answer! THANKS a mil!
THANK YOU!!! @@boenje
Great video! Hey can we a get a tutorial on how to do those black and white lower thirds animation? Thanks! 1:23
When Im connecting my Bspline node to merge node its not showing white spot And border too after undoing solid ?
Did I miss something ?
Can you please help me..
Same]
it will show once you added protoV2Effect
I downloaded proto v2 but it doesnt show up under the tool select screen
Drag it into fusion after downloading. If it’s a DRFX file then just double click it.
omg finally someone shows this technigue with proto!
Okay, I followed every single step, and not getting the effect. Do I need to set my DR in certain way in order forme to view the video(background) and the "white" line at the same time? Because all I see is my "green" B-Spline. However, I kept going -- got the PROTO V2 -- the Electro -- just to see if I get any effect. None. I got nothing from all the steps I followed. Well, not completely true....I do see the green B-Spline I created.
Correction: I see the issue. My ProtoV2 node is not connected to the B-Spline node. I am unable to connect those 2. Any suggestion, Jamie?
yeahh same!
This video is amazing broooo🔥🔥
Thanks Jimmy! 🙏🏼🙏🏼🙏🏼
This is soooooo sick
Keep these awesome vids coming!!
Mammamia!!! ❤
I constantly fail to install Proto, to the fusion panel to be precise. Proto V1 works at the "Edit" panel, but not Proto V2. In fusion panel none of those work. Any ideas what might be the hurdle and how to fix it? I would be beyond grateful.
I have same issue
Same…
yup protos ain't workin in fusion
I followed the step but by 2:42 min couldn't see the the white outline. Or do I need the version 18.5 for that?
im trying it out right now and i am on round about 2:45 but my line dont show, i only have the green line where i can change the position but not the line in the circle that rotate later. pls help
Same
Had the same problem and saw a response from @justinchang3573, that you need to "do your polygone or BSpline into a background node, then into Proto v2 and then into the merge node". I've managed to see the BSpline now but I haven't fully tested it yet!
@@LeopardThong this dosent work for me what an i doing wrong im so confused
👌You amaze me with every video.
keep up THE good work 🙌🙌🙌🙌🙌🙌🙌🙌
fusion is really tough to understand. I tried some of your effects previously step by step but something keeps going wrong. and I have no clue what. Given up basically
Practice and understanding the basics helps. Remember, I was in your shoes one day. And when I was learning this stuff no-one was making tutorials like this.
Simple...yet GREAT! Thanks Jamie!
No problem Mike! Thanks for watching :)
@@JamieFenn can i make it in video game or no
Bro you are a genius haha love your generosity bro.
Me molan mucho tus videos. Muy profesional 😎
Amazing effect! 🔥 Thanks a lot for this video
Wow 😮🤩 you rock bro amazing effect 😉
THIS IS AMAZING. Thanks MAN
Hey man, thanks for putting together this great tutorial. Loving your content. I'm new to davinci and working in fusion. Is there a difference in doing effects in a fusion comp on Log footage in your timeline, or would you have better results with tracking etc if you were to grade and render the clip first before making a fusion comp for you effects? I see that you are working on graded clips. not sure if you shot these in log first or not. Just trying to wrap my head around the workflow. Thanks!
I am digging this!! Thanks Jamie
Hi ! great tutorial ! Could you explain how to color the clip afterwards WITHOUT affecting the proto effect ? I tried with different media out from a multi merge node in fusion but it doesn't work.
Thanks a lot !
when I put the video it worked clean, but now with this effect it's very slow and how to solve it... it looked like it was in my fps
Amazing ❤️🔥
Classic fenn stuff ......
;)
Cool stuff Jamie
I dont know why but when I get to the part at 243 and connect the bspline and the merge node, I don't get that white blob...what could be the issue?? Please help im desperate lol
Did you figure this out?
Hi, if I connect PROTO, the BSpline color remains white and I can't change it even in the "Colorize" settings. Does anyone have the same problem? Can you advise me how to do it? Thank you!
If you found a way for fix that tell me cus i have your problems.
@@AriaRoben me too and it didnt show too
hey Jamie, my b spline is not working, when I mask it all out and merge it the solid layer doesnt seem to work, in your case when you merge bspline the masked area automatically gets white after deselecting solid it becomes normal having a line on the masked area. but when I do all of the above, merging it doesnt seem to whiten the mask area so the white lines doesnt seem to appear. kindly reply what seems to be the issue.
I got the same issue
@@fpsbajwa6851 ruclips.net/video/h62x-kSKQpU/видео.html
This solve my prob. What you need to do is go through the whole process and at the end add proto after bspline. Thank me later 👻💯
THANX
sir , in 18.6 version , the proto is not being shown in tool and when i select from fx section , it does not appear , can you pls help
Amazing Tutorial Dude! Pls do more Davinci effect tutorials for nice car edits :)
Mantaaap... terimakasih selalu kasih ilmu2 baru yg sangat penting
love from kerala bro...😍
Great Tutorial I Wanted To Ask How To Reverse The Movement Of The Line Thanks
Keyframe them the opposite way. Or draw the line the other direction.
Excellent!😃
the like white part doesnt show even if i make the border higher and its not solid how can i fix? 2:45
Never mind i fixed it!
how ?
@@1c4yy
My Si-fu!! Thank you, Jamie!!
Thanks!
So good you make it look easy 🔥
at 7:43 cant you just keyframe protos length so it skips over that section??
When Im connecting my Bspline node to merge node its not showing white spot And border too after undoing solid ?
Did I miss something ?
Can you please help me..
Had the same problem and saw a response from @justinchang3573, that you need to "do your polygone or BSpline into a background node, then into Proto v2 and then into the merge node". I've managed to see the BSpline now but I haven't fully tested it yet!
Thank you so much!
Hey Jamie, when I connect the BSpline to the merge node it doesn’t remove the image as shown in ur video (like I can’t see the object outline) . U hav any fix?. I did this effect in 3 other videos and it worked incredibly well, but idk what happened to it now. Great tutorial as always
Awesome content !! I found as a beginner !! Thanks
i was wrong, title isn't cliche click bait.
thanks for sharing!
🤟🏼
Hahaha never click bait. I always try and deliver :)
Do you have the Proto line effect for the computer (as in, NOT iPad version)?
Yea
amazing tutorial but i have a question why don't you use planar tracker for your polygon (mask)?
Someone didn’t watch the entire video 😐
Great Tutorial as always 🙏🏻
But guys, I have a problem:
My proto has a resolution of 1920x1080 and when I use it in a 4K timeline i have hard edges where the 1080p resolution ends in the 4K footage. Can I resize proto v2 to 4K also?
Mine keeps saving to templates instead of tools. How do I fix this? Great videos by the way!
thank you so much, this tutorial changed my life
Glad to hear that!
Thanks alot 🎉🔥🔥🔥
Simply amazing !!!! Mic Drop Kick
🙌
the proto v2 pack is not working for me? an error msg of warning unknown tool found is popping up and cannot find the proto tool in the fusion page, help?
the same thing
Same 😭
When I press the shift spacebar, the proto does not appear. I would really apreciate if you help
Did you install it?
@@JamieFenn yes i did
Same Here! Any Updates?
Same with me... just drag and droop it from the Templates menue
Great videos. Newbie to DaVinci. I don't have the paint mode when in fusion. Does that only come with paid version? Either I'm blind or it's not there lol.
Thank you very much for a brilliant lesson)
Great job 👏. You are a saviour for us 😅. Keep doing and we will mock your work. Hehe
Hahaha thank you 🙏🏼
@@JamieFenn you are welcome
Hey bro, this is sick! amazing work, pls keep making this awesome resolve video editing techniques.
You got it! (My entire RUclips channel is pretty much editing techniques)
@@JamieFenn do u have advanced course? 😮
Thank you SOOOOO much for stating that it can be done with the free vs paid. So many tutorials leave that out and 3hrs later you realize it just can't be done.
No prob 🙏🏼
Hello, I watched yout tutorial about Epic Neon Effect, I have a problem with add efect "Proto" to bookmark "tools", Thanks in advance, if you could show me how it's done
gracias bro muy buen video excelente contenido
De nada, espero que te haya gustado!
@@JamieFenn oye una pregunta que hago si mi pc no es muy buena y se me crashea el programa cada que intento hacer algo ?
Hello my friend, excellent tutorial. I have a problem, when rendering the effect does not appear. the video is rendered without the effect, do you know what could be causing this?
When I connect the BSpline to the merge 1 node, no white cover shows on the screen, someone plz help
after connecting bspline or poligonal no white are is showing and no white line is showing
Can you use the magic mask effect to get around the lines???
Sure. You just have to merge that part on top of it.
Hello, can anybody help? at 5:06 there is a cut and he have the cool lines effect but for me it do nothing. I don't know how he show it. I'm a beginner so there may be just a case to tick or something like that ?
And i also don't have the windows after "Master Noise Controls" is my proto plug in the problem?
I've already downloaded Proto but can't find it in DaVinci Resolve, what should I do?
When you are walking around the car are you in FPV mode and following the lines or are you doing half moon circles with a steady horizon and editing the movement in post?
Both