Amazing video, CAn you help me how to maching our name in catia . With the help of pocketing machining. I know how to enter the text on part but I cannot perform machining. operation.
You have to use the module 'Generative Shape Designe' then on the selected plane, draw your sketch and use the command 'Projection Definition'. Here you have a video CATIA Video Tutorial - Surface Design WorkBench - Projection I hope that's what you mean.
Very good video, it's helpful. But I have a question : Do you how to input choatic engravings on a cylinder? Like a Coca-Cola glasses. Do you see what I mean?
I rotated another sketch but is another way (probably longer), in 'Generative Shape Designe' you need to create surface and then use the command 'Projection' and then you have to put a lot of work to achieve this effect. I hope that you are able to do this.
I've never used 'Generative Shape Design', but I've used 'Wireframe and Surface'. Thank you for the idea. I don't need it now, but I'll leave it here if anyone else does. Here's some of that 'lot of work' explained: Once you project the text on a surface, you should offset that surface by the depth you want the letters to be. That should make two surfaces. Now project your first projection to the next surface. Do a 'Multi Section Surface' to connect the projections into surfaces. Trim the leftovers. You now have the numbers which appear nicely engraved (but still only as surfaces).
Uthael Killean I know this is not the perfect video, the best, the easiest way to do it. I know a way simpler, more difficult, as you probably know by using this program You can make the same thing in different ways, and only you and your knowledge depends on how you make this. Greet and wish the better films.
Hello, In my realization Silhouette line projection tool create another line in front of the other side of the button and Slot definition does not work because there are two open bodies. Another line must be selected and deleted. Best regards.
To change the language you must to go "Tools -> Customize and from here to the tab Options -> User interface language " As for your problem, send this file to an e-mail, I'll see what's wrong, krzysztof.gad@gmail.com, best regards
@@krzysztofgad3662 Hello Krzystof, At the moment I have already solved the problems that I encountered. Thank you very much for your email address, if I have an insolvent problem I will use it, ok? Best regards Georges
Наука
Amazing tutorials :D
to avoid last shaft operation you could select up to element on previous pocket and then offset.
THANKYOU FOR THIS VIDEO!!!!
Thank you for your video.
3D text model discuss very easily sir
Good job!!
great work to do
Thank you
route, and connect it to my computer system, will it be as simple as creating one track and play a composition through it, recording it, then
next lecture comming soon sir
How come so many of the Catia video's I've looked at don't have sound? Is there somewhere to change that?
This is the difference between a video and a teacher. The narration explaining both how and why is most important.
Amazing video,
CAn you help me how to maching our name in catia . With the help of pocketing machining. I know how to enter the text on part but I cannot perform machining. operation.
Hi, Thank you for the video.
Can you help on how to sketch on a curved surface, like a circle or a non-uniform surface using CATIA?
You have to use the module 'Generative Shape Designe' then on the selected plane, draw your sketch and use the command 'Projection Definition'. Here you have a video CATIA Video Tutorial - Surface Design WorkBench - Projection
I hope that's what you mean.
Very good video, it's helpful.
But I have a question : Do you how to input choatic engravings on a cylinder? Like a Coca-Cola glasses. Do you see what I mean?
Almost exactly like in the video, only the last step you perform in 'Generatiwe shape design' and you use the function 'projection'
nice video
Between 11:43 and 11:50... How did you make the numbers shallow? Rotated another sketch under all the numbers or is there another way?
I rotated another sketch but is another way (probably longer), in 'Generative Shape Designe' you need to create surface and then use the command 'Projection' and then you have to put a lot of work to achieve this effect. I hope that you are able to do this.
I've never used 'Generative Shape Design', but I've used 'Wireframe and Surface'. Thank you for the idea. I don't need it now, but I'll leave it here if anyone else does. Here's some of that 'lot of work' explained:
Once you project the text on a surface, you should offset that surface by the depth you want the letters to be. That should make two surfaces. Now project your first projection to the next surface. Do a 'Multi Section Surface' to connect the projections into surfaces. Trim the leftovers. You now have the numbers which appear nicely engraved (but still only as surfaces).
Uthael Killean I know this is not the perfect video, the best, the easiest way to do it. I know a way simpler, more difficult, as you probably know by using this program You can make the same thing in different ways, and only you and your knowledge depends on how you make this. Greet and wish the better films.
How did you get from 11:47 to 11:49 ????
I cut one scene from this video, there is one more operation 'shaft'.
Hello,
In my realization Silhouette line projection tool create another line in front of the other side of the button and Slot definition does not work because there are two open bodies. Another line must be selected and deleted.
Best regards.
To change the language you must to go "Tools -> Customize and from here to the tab Options -> User interface language " As for your problem, send this file to an e-mail, I'll see what's wrong, krzysztof.gad@gmail.com, best regards
@@krzysztofgad3662
Hello Krzystof,
At the moment I have already solved the problems that I encountered.
Thank you very much for your email address, if I have an insolvent problem I will use it, ok?
Best regards Georges
90% comments asking for 11:47 to 11:49 explanation, 😜
please provide audio and the clarity of pixels
+Praveen shivapooje I try to make my video was of the highest quality, I don't have plans to add my voice, sorry for that.
+Krzysztof Gad thanks for the video. It was blur in my screen.the tools are blur.