The only tutorial I could find for the XS Max's dual battery design. Thank you so much. My battery health data is now at 100% with no more battery warning error!
Boleh tahu??kenapa lepas siap 15:51 kena masuk battery lain ? Lepas tu Baru masuk battery yang betul..?dan lagi 1..kalau battery tak ori masih boleh dapat 100%?
I dont have JC V1S tool, if I buy new battery and swap BMS, what will be the outcome? No warnning message, but settings will show old battery’s health?
I have the Luban L3 Mini. Works great, software is very intuitive, and functions with the most devices I've seen. If you live in US though like me, I would recommend Qianli iCopy, as it's easier to find tag-on flex cables online for battery repair on 11 and up models. Otherwise Luban will require you to buy from Aliexpress and ship from China which takes longer.
hi bro, can i ask the if the 1st letter on the model number of iphone can be reprogram?like if its already a refurbish iphone, the 1st letter on the model number should be start with "F" right? but can they reprogram it to still make the 1st letter to "M" so they csn deceive buyer and tell them its bought like a brandnew one? coz i have this 2ndhand iphone ,and the tech said that its a refurb but my model number starts with m
Brother so after change cell and reset values then put in another non genuine battery to get message then but in new sell battery with 0 cycle and 100% efficiency then phone will reset to 100%?
109 / 5.000 Resultados de traducción Hello, modifying the battery percentage without replacing it with a new battery does the cell phone take the same? because testing with batteries modifies me in 3utools but the cell phone does not take it that way thanks
I have a problem every time I soldered the cell to the new battery it no longer works could you help me with a tip!!! I've been watching the video more than 100 times I'm interested in learning, but even so the original flex burns I need help please !!!!!!!
Bro i have a iphone xs which is now showing service. I also have a dead iphone xs. Can i use the battery of dead xs to my phone? Will it need programming the battery to work battery health function?
The only tutorial I could find for the XS Max's dual battery design. Thank you so much. My battery health data is now at 100% with no more battery warning error!
Hi, I'm from China, I saw your content, thanks for your videos, I learned a lot. Thank you and I congratulate you.
Tq for your comment. Nice to meet u !
Terbaik boss.. semoga maju jaya sebab tak kedekut ilmu
Tq bossku 🤝🏻
What a clear video superb 🔥
Thks for watching
Good job . I like it
Thks for watching
thank you.i learn new thing today!
Good day bro
Good job
Thks !
only the xs and xs max models or newer models can also be done with this programmer?
You can do older models too but it’s from the XS models required to do if you want do keep the battery health function.
Yes, and start from ip11 series need add a small board to support the battery.
Can i ask, is it the process of battery replacement is the same between 3rd party like you with apple authorised?
Apple authorized svc cntr will ask you double fold bro
Not same. This is from 3rd party process. Cheaper from apple store.
thank very
Boleh tahu??kenapa lepas siap 15:51 kena masuk battery lain ? Lepas tu Baru masuk battery yang betul..?dan lagi 1..kalau battery tak ori masih boleh dapat 100%?
Ya. 15:51 kena masuk batt baru, Sbb nk bagi fon detect 100% bh batt baru. Battery tk ori memang x blh dpt 100%. Kena tukar apple genuine part.
master
Tq bro….
I dont have JC V1S tool, if I buy new battery and swap BMS, what will be the outcome? No warnning message, but settings will show old battery’s health?
If you just swap the bms, the battery percentage and charge are still the original data.
@@melakaiphonerepair but still, the phone will last longer?
by a chance you have detailed reviews on i2C i6 / Luban L3 mini / JC V1SE / Qianli iCopy , please? Can you share info. thank you!
I think all brands are same…. My welding machine is i2C . My programmer is v1S (old model)
I have the Luban L3 Mini. Works great, software is very intuitive, and functions with the most devices I've seen. If you live in US though like me, I would recommend Qianli iCopy, as it's easier to find tag-on flex cables online for battery repair on 11 and up models. Otherwise Luban will require you to buy from Aliexpress and ship from China which takes longer.
@@IRIS-cu4es by a chance you have detailed review
How is battery backup compared to a new genuine battery from apple?
Battery life difference.
Please what’s the name of the device used in soldering the battery to the old battery? Please respond as I need to buy some. Thanks
i2C welding machine
Thanks so much.
Hi bro , can iPhone 12 Pro Max battery be changed like this ?
Can, but need to add another small board.
hi bro, can i ask the if the 1st letter on the model number of iphone can be reprogram?like if its already a refurbish iphone, the 1st letter on the model number should be start with "F" right? but can they reprogram it to still make the 1st letter to "M" so they csn deceive buyer and tell them its bought like a brandnew one? coz i have this 2ndhand iphone ,and the tech said that its a refurb but my model number starts with m
Got any example ?
hello sir , may i know . how you adjust power on ic2 welding ? i was try but always hole on the plat 😂 can you teach. pleaseee
sorry i2c welding set
@@najiynasri695 try starting lower power, then only higher if did not stick....
Só preciso substituir a placa BMS para a nova bateria? A leitura de dados Funciona com a Qianli Icopy plus 2.2 ?
English pls… tq
Hi, Can I use an iphone X battery as boot to get the error message and then put the original battery back?
My iphone is XR
Sure. As long the battery connector are same… go ahead!
@@melakaiphonerepair Thanks , its working .
my battery is at 78% health with jc I can change to 100%? or I need do all process?
Can change to 100%, but performance still 78%.
@@melakaiphonerepair I can change the health of the old battery and is gonna appear 100% on iphone
Brother so after change cell and reset values then put in another non genuine battery to get message then but in new sell battery with 0 cycle and 100% efficiency then phone will reset to 100%?
Yes
Hi..my battery unknow part after 1 day reset by jcid...why?
What did you use on battery before programming with jcv1s
use a new battery ,let the device detected new battery with 100% 1st.
@@melakaiphonerepair so you used a battery charger on it what brand name was it
@@chrisbaxa9956 brand Qianli. if u dont have any battery charger, i use power supply direct to charge the battey...
bos,qianli icopy 2.1 boleh reset % be3 100% balik ke ? mcm u punya Jc Program ?
Hi… I x pernah pakai qianli brand , tapi masa I survey semua function sama je…. Cuma brand x sama.
Why that iphone have different color on battery and settings ? ,
Different colour? Different saiz I think
Boss itu welder spot brand ape?
Qian Li
Where can we find that unprotected battery?
From china suppliers….
What battery brand you used ?
From china
109 / 5.000
Resultados de traducción
Hello, modifying the battery percentage without replacing it with a new battery does the cell phone take the same? because testing with batteries modifies me in 3utools but the cell phone does not take it that way thanks
yes, without replacing new battery also an modify %.
But performance not same as new battery
I’m still on 13.5 on my xs max don’t wanna update cuz I kno iOS 16 drains battery more
How about iOS 15.6?
I suppose that device is quite expensive.. 😔
80-90 usd, i think
Very dangerous to use scisors to do that. You almost shorted the battery.
Yes… nw we upgraded ceramics scissors
I have a problem every time I soldered the cell to the new battery it no longer works could you help me with a tip!!!
I've been watching the video more than 100 times I'm interested in learning, but even so the original flex burns
I need help please !!!!!!!
Do not use solder anymore, bro. Use welding machine for battery replacement. i2C welding not bad. Try it
Bro i have a iphone xs which is now showing service. I also have a dead iphone xs. Can i use the battery of dead xs to my phone? Will it need programming the battery to work battery health function?
Every iPhone has it own battery encryption. Cannot use others xs battery to recover battery health.
Iphone x please 😢
Address
I m from Malaysia . WhatsApp me to get location ya… Tq for watching …. wa.me/60167100231
Bro, apa nama model alat welder tu?
i2c
How much would that cost
Rm200-300 depend what model
Location?
WhatsApp me get location ya…. wa.me/60167100231
Battery replacement is 100% now but I got a “battery is significantly degraded” message later.
What to do?
Battery quality not good enough. Try to get high capacity batteries.
fingernails 🤮
Hahah….. that time was our state election. We have to marked it after voted.
Word of advice dude. You’re gonna do a closeup RUclips video, paint over your gross fingernail..