I installed the IDE on my Ubunty 16.04 from arduino page but got this error somehow (even when i installed it with sudo). Your tutorial helped me fix this, so there goes my like
Doesn't work for me on Linux Mint 18 (Ubuntu-based). I'm a member of "dialout", and /dev/ttyACM* is owned by root:dialout. Running Arduino IDE as root works, but is a no-go. And yes, I've rebooted, re-plugged the board, re-installed Arduino 1.8.8... It worked when I was using Linux Mint 17, but I can't get it up and running on my current system. The internet turns up nothing but the "solution" that you stated here. Using Linux since 1997, but feeling real dumb right now.
(From Linux Mint) It worked for me!!! Altough I realized I ran Arduino in the terminal without "sudo". Now I run Arduino in the terminal as superuser and nothing of these errors appear.
@@ukrainegermanysingforukrai5888 i know this is old, but you open a new terminal window, and you put sudo arduino, then your sudo password and you're done.
super mega ultra hyper archi giga thankyou!!!!!!!!!!!!!! imagine this very simple issue and was soo hard to find. my 1st arduino board, one week trying one thing and another and most help is for windows.... THAAANNKS!!!
It worked in ubuntu 18.04. But when i once plugged out after i had plugged in it showed the same error.Then i have to write same command again. Is there any permanent solution?? Thanks in advance ...
Hi I have the same problem but it only does it with Arduino Leonardo Arduino UNO works great why? I'm following a thousand tutorials and it doesn't work. But the beauty that it worked first and then the next time it doesn't work anymore. Do you have any idea how I can fix it ???
Hi. I am using an Arduino Leonardo and my Arduino IDE is 1.8.9. I am using Ubuntu 18.04. I am still having the same error even though I have entered that 2 commands. Is there something I missed to do or something I have done wrong? Please help
Hi @@NITHINPB. I have checked it with the Arduino IDE. And I have checked it with the /dev folder. Every time the board is connected to my laptop's USB port ttyACM0 is present in the /dev folder. I would use "sudo chmod 666 /dev/ttyACMO" everytime I connect the Leonardo to my USB port. I have notice this issue on the 1.8.9 version of the IDE and with Ubuntu 18.04.
Thanks for the video, I’m new in the Linux world. Can you please explain all the step. Is easy to copy what you write, but i need to understund too. Thanks a lot for you reply
Do you use ROS ? I can not sync with USB. rosrun rosserial_python serial_node.py /dev/ttyACM0 Unable to sync with device; possible link problem or link software version mismatch such as hydro rosserial_python with groovy Arduino imgur.com/a/BF2xSJh
Hello i m sorry for a question i did what you say but every time i disconnect arduino i have to reperat the commamd.. How can i fix this command permanently (sorry for my english i m italian)
Using IDE 1.0.1 on, Mint, or Mint-Deb, or probably Ubuntu: With board plugged in, try this. sudo sh arduino, then click run in terminal. You should now see entry in Serial Port. To make it permanent, I did this. sudo usermod -a -G tty yourUserName sudo usermod -a -G dialout yourUserName
make sure the device is connected in the /dev/ttyACM0. if the device is connected in the /dev/ttyACM1 or another change the number appropriately. You can also try disconnecting all other USB devices and reconnecting the Arduino.
Aya Mamdouh instead of using $ sudo usermod -a -G dialout nithin Use your username in the place of nithin. Like, $sudo usermod -a-G dialout username You can find your username by running the command $whoami in most Linux systems
I'm stuck when use windows to setting usb device, so the last way I use virtualbox and install linux mint. and do some setting with unknown device and watch this video. Thanks a lot
Excellent, congratulations. In my case it was another file (/ dev / ttyUSB0). Your tip was of great help, it worked perfectly. Thank you very much.
I installed the IDE on my Ubunty 16.04 from arduino page but got this error somehow (even when i installed it with sudo).
Your tutorial helped me fix this, so there goes my like
Super simple explanation and right to the point! Thanks and Congrats!
Much appreciated!! It was driving me nuts and I coudn't find anything else online that worked!
Hiya Nithin, thank you for your excellent video. I had to change ttyACM0 to ttyUSB0 and all was well. Thank you very much 😀
Hi Jones,
Happy to help :)
thank you very much. i was looking thru forums but none of the solutions worked and they were very complicated. this was easy and simple and it worked
I'm using Linux Mint. I tried this and I did it. Thanks a lot.
🤗🤗🤗🤗
Thank you very much, you saved me. Finally this was the only thing which worked. Ty man
happy to help
Perfeito. Funcionou de primeira. Obrigado !!!
Thx man that’s very straightforward
Thank you. I'm beginner to Linux. This helped me a lot. Worked on Linux mint Tara.
Happy to help you😁😁
It worked for me. Thank you!
Happy to help u😁
Finally!!! Now it works! Thank you!
It worked! Thank you so much.
Greetings from Argentina.
It's working for Ubuntu 20.04 LTS. Thank you.
Hello thank you for your help I saved me from a rush of a project in hand works in 2022 the instruction of the commands.
Worked like a charm. Didn't know it was a permissions issue.
It was very helpful. We were tired searching troubleshooting for this problem. You made my day. Thanks a lot
chmod: cannot access '/dev/ttyUSB0': No such file or directory
unable to set ,can you please guide me to resolve this
Same here
Doesn't work for me on Linux Mint 18 (Ubuntu-based). I'm a member of "dialout", and /dev/ttyACM* is owned by root:dialout. Running Arduino IDE as root works, but is a no-go. And yes, I've rebooted, re-plugged the board, re-installed Arduino 1.8.8... It worked when I was using Linux Mint 17, but I can't get it up and running on my current system. The internet turns up nothing but the "solution" that you stated here.
Using Linux since 1997, but feeling real dumb right now.
Sounds like you are very familiar with Linux , hope the Arduino forums help you😊😊😊.
Thanks Nitin. That was really helpful.
I'm using arch and for me I had to replace dialout with wheel to get this to work,but thanks for the tutorial.
and also /dev/tty/ACM0 to /dev/tty/USB0
Thank you for this information. Appreciated.
(From Linux Mint) It worked for me!!! Altough I realized I ran Arduino in the terminal without "sudo". Now I run Arduino in the terminal as superuser and nothing of these errors appear.
could you give me the code for it ? i am new in linux mint :-)
Yep that do the trick.
@@ukrainegermanysingforukrai5888 i know this is old, but you open a new terminal window, and you put sudo arduino, then your sudo password and you're done.
omg thank u so much. this issue was driving me nuts
super mega ultra hyper archi giga thankyou!!!!!!!!!!!!!! imagine this very simple issue and was soo hard to find. my 1st arduino board, one week trying one thing and another and most help is for windows.... THAAANNKS!!!
😊😊😊
It worked in ubuntu 18.04. But when i once plugged out after i had plugged in it showed the same error.Then i have to write same command again. Is there any permanent solution?? Thanks in advance ...
Thank you that did the job for me after reading a few tutorials and FAQ's that did not work.
Thanks you brother ❤❤ keeping going wish you a great success journey in your life
It worked for me thank you very much.
Denis from France
Tku for your feedback friend
Gracias, excelente tutorial
It worked! Great job! Thanks!
I tried this. But the result is the same. Not uploading. Still getting the error. Can you give me a different solution. And I'm using Ubuntu 18.10
same
Did you find it?
@@abdulkarimhalai6708 nope, I shifted to kali
@@elvishendrix9437 oh I am hearing about should I shift too? I mostly use it for basic things and I also wanna do some programming
@@abdulkarimhalai6708 if you're good at coding , I say you shift. Or else it's a no go . You'd just end up googling every single problem you face .
You saved my life. Thank you sarrr
Thank You very much! It works perfectly.
thank you my friend it works also in kubuntu!
Thank you for sharing this information...
Thanks so much, from newbie like me
Hi I have the same problem but it only does it with Arduino Leonardo
Arduino UNO works great why?
I'm following a thousand tutorials and it doesn't work.
But the beauty that it worked first and then the next time it doesn't work anymore.
Do you have any idea how I can fix it ???
Hi. I am using an Arduino Leonardo and my Arduino IDE is 1.8.9. I am using Ubuntu 18.04. I am still having the same error even though I have entered that 2 commands. Is there something I missed to do or something I have done wrong? Please help
Can you check whether you are connected to ttyACM0 port. ?
Hi @@NITHINPB. I have checked it with the Arduino IDE. And I have checked it with the /dev folder. Every time the board is connected to my laptop's USB port ttyACM0 is present in the /dev folder. I would use "sudo chmod 666 /dev/ttyACMO" everytime I connect the Leonardo to my USB port. I have notice this issue on the 1.8.9 version of the IDE and with Ubuntu 18.04.
@@jdstufu let me check with that version!
Thanks man, I was already thinking that my linux was bugged.
By the way, why is this command necessary?
thank you it works straight away
Thank You So So So So Much.
Your video really save me.
Saludos desde Mèxico
Roberto Sauceda thanku for your support
You're a god man! Thank u so much!
Thanku so much for your support ....😊😊
very very thanks.
All day try >> Not Uploading
two commands >> Uploading OK
Thanks for your reply
Thankyou! It helped me!! God Bless!
Thank u for your support
It helps me lot.Thank you very much.
Thanks for the video, I’m new in the Linux world.
Can you please explain all the step.
Is easy to copy what you write, but i need to understund too.
Thanks a lot for you reply
This was so helpful!
Happy to help
Make more such videos they are really helpful
Nice! Thanks
thankyouuuu you saved my lifeeeee, may god grant your wish
thank you very much it works perfect on linux mint
Tku for your feedback
@@NITHINPB yes
windows? please
Hi Tyler,
please take a look at the discussion: forum.arduino.cc/index.php?topic=630598.0
@@NITHINPB thank you
Thank you so much!
It worked. Thanks a lot.
Ur welcome
It works !! thankss!
Ciao,funziona tutto bene ma quando chiudo arduino-ide e lo riavvio tocca rifare l'operazione con il terminale,dove sbaglio,grazie.
It works! Thanks a lot! You earned yourself a like!
Thanks for help... I am suffering from last week. Now I have solution
thank you very much !! Its really helpful
Do you use ROS ?
I can not sync with USB.
rosrun rosserial_python serial_node.py /dev/ttyACM0
Unable to sync with device; possible link problem or link software version mismatch such as hydro rosserial_python with
groovy Arduino
imgur.com/a/BF2xSJh
Check out this...
stackoverflow.com/questions/48292089/arduino-rosserial-unable-to-sync-with-device
TQ bro 💯% working....TQ so much bro
happy to help.
Thank U so much in kazakh))
thanks its works
a billion thanks for you
When I use the first command ,Its says usermod: group 'dailout' does not exist
Lovely!!! It worked
Thanks a lot!
Hello i m sorry for a question i did what you say but every time i disconnect arduino i have to reperat the commamd.. How can i fix this command permanently (sorry for my english i m italian)
Using IDE 1.0.1 on, Mint, or Mint-Deb, or probably Ubuntu:
With board plugged in, try this. sudo sh arduino, then click run in terminal.
You should now see entry in Serial Port. To make it permanent, I did this.
sudo usermod -a -G tty yourUserName
sudo usermod -a -G dialout yourUserName
Probably there is no peremenet fix for this issue..I am also working on this issue..
I made how you said now work.. Thx very much 👍 👍 👍 👍 👍 👍
😁😁 best wishes for your project
Great! thx a lot! it's working!
thanks for the video but the second command tells me that there is no such thing as /dev/ttyACM0
your port could be different. check the port from Tools->Port
Please help....when I write the second command it says chmod: cannot access dev/tty/acm0, not a directory....and it failed to work.
Thanks man it worked when I tried it again.
😊😊😊
Thank you, i got it!
Thank you dear!
always
It's still showing the same error. Plz tell what should I do
try reconnecting the device
@@NITHINPB I have tried it many times . I dont know what's the main problem
@@musiclovers3758 make sure you are connected to ttyACM0 port else try ttyACM1 or the corresponding port
@@NITHINPB ok , I would try it . Thanks
(base) rakshith@rakshith-Lenovo-G50-70:~$ sudo chmod a+rw /dev/ttyACM0
chmod: cannot access '/dev/ttyACM0': No such file or directory
make sure the device is connected in the /dev/ttyACM0. if the device is connected in the /dev/ttyACM1 or another change the number appropriately. You can also try disconnecting all other USB devices and reconnecting the Arduino.
Obrigado,mais toda vez tem que fazer isso?
Hero 🙌
when I use " sudo usermod -a -G dialout nithin .. the answer is "usermod: user 'nithin' does not exist"
what can I do?
Aya Mamdouh instead of using
$ sudo usermod -a -G dialout nithin
Use your username in the place of nithin.
Like,
$sudo usermod -a-G dialout username
You can find your username by running the command
$whoami
in most Linux systems
instead of nithin use ur username
Worked Great For Me Thanks,
Thank you so much
wow......it worked !! made my day
Thank you very much, It's so useful, I did it and it worked
thanks Mr x
I did this, and I am still getting the same error ... please help
Hao Tan try reconnecting your arduino
Благодарю,весь мозг сломал))))
Thank you soo much bro
How can I open the terminal??? and how do I use that shortcut?
Use crtl + alt + t in Ubuntu
@@NITHINPB ok but If I have Windows 10? Then what do I do?
@@AdrianuLL you can't use this fix in windows machine.
This will only work with Linux system
@@NITHINPB oh ok...
@@NITHINPB but us there anyway to fix this error on Windows?
Thanks man
I might have just grown to love a robotic voice.
Thanks you very much!
What about in windows
Thanks
where can i find terminal?
Ctrl+ alt + t in ubuntu/debian .... Or search for terminal
Perfect!!
Didn't work, nothing works for mee, error stays
thank youuuu
thanks that helped!
I'm stuck when use windows to setting usb device, so the last way I use virtualbox and install linux mint. and do some setting with unknown device and watch this video.
Thanks a lot
thankssssssssss soooooooooo muuuuuuuuchhhhhhhhhhh
thanks man ... :D