You sir, are the Organic Chemistry Tutor of Arduino. I always go to your videos if I want to continue in learning arduino. Great teacher, love to see more of your videos.
As a professional programmer, I thought I could do this on my 1st trial. I finally got it to work (after trying hundreds of times, with sips of coffee, and believing holding my breath will help) when I found out that delaying the loop was my only solution. I had doubts that what I did wasn't the best way of doing it. And then I saw it at 18:42 that explained what I was missing. And now I can't sleep because of the coffee :) Nevertheless, I finally felt the true satisfaction of saying "BOOOOOM!"
I've finished 28 lessons in 4 days and have completed all the homework and lessons including this one. I retired from teaching jr high coding and robotics. We never got into programming Arduino and I always wanted to, so I bought an Ellego and Vilros kit and when they arrived, I started on your lessons and I am having a blast.
I started out wanting to get a Technicians license for Ham Radio. Flash forward two years later and I have an extra class license, I went back to school to become certified in IoT, just so I could build my own SDR radio. I now teach Arduino and and Raspberry Pi classes to teenagers. I built an electronics lab in my house as well. I decided to work through all your videos because I recommend them to anyone wishing to learn this type of material. My teaching has greatly improved due to your videos. I am so glad that you explain the math and get students to try things on their own. I came up with a similar sketch (although I prefer to call it code) when trying to do it on my own. I'm currently working on a self driving robot car based on the Arduino platform. I could do this stuff all day and night! Thanks for the great lessons!
I have been watching the series (old as well as the new and improved) repeatedly. Here is the thing for me. If you listen once, you heard it...if you follow along...you copied it...if you do it on your own after the previous, you remembered it...but, if you can create from what you have done previously, you have gained experience and knowledge, therefore...you have learned. I have LEARNED things by reviewing and practicing via your lessons. The things I have taken from your lessons is far more than I learned from dozens of books. For this I thank you, and ask that you continue to keep it simple and speak in "English" vs. speaking in trueNerd (bumpy text used there just for you). Keep up the good work!
I attempted this on my own, and got as far as assigning an independent tracker - in my case I used a boolean. What I did not think of was using && , so I kept falling down, cycling through random states. I also did not think of placing a small delay in the loop to make things a little cleaner; that was a very useful lesson. I then watched through and, although I wasn't able to work through it alone, the lesson afterwards made a lot more sense for having at least tried! Thanks Paul!
Hi, Paul...got to be honest with you, I couldn't work this one out by myself! The problemo was a tad confusing to solve, Old Bean, and after many cups of tea and a whole lotta head scratching and coding errors, I gave up and admitted defeat. The answer to the problem was even harder than I had imagined, so it was a good job that you went on to explain how to overcome this particular problem. Thanks again from across the pond....hope all's well over there with you and family, what with all this Coronavirus malarky. Stay in...stay safe...and stay "switched on".....pardon the pun. Regards....the Grumpy Limey.
I've been looking at the code over and over again and it's amazing how efficient the code is. It's quite confusing at first but I am starting to understand why it works. Many thanks for showing how to use a pushbutton as a toggle switch!
i forgot to mention in my previous comment, that your code is simple, elegant and clever and very important, validated. You kept the button pressed on to ensure it will not change, simple but effective validation.. WELL DONE!!!!
Just wanted to share how I made a toggle switch, minimal code: int swPin=8; int LEDPin=10; int LEDstate=0; int j; void setup() { // put your setup code here, to run once: pinMode(8,INPUT); pinMode(10, OUTPUT); Serial.begin(9600); } void loop() { // put your main code here, to run repeatedly: int swVal; swVal=digitalRead(8); if (swVal==HIGH){ LEDstate=abs(LEDstate-1); digitalWrite(10,LEDstate); Serial.println(LEDstate); delay(500); } } Using the ABS function returns either 1 or 0, opposite of the previous state. Thanks for all the great lessons.
I was able to use your tutorial to turn an ultrasonic sensor into a switch whenever it read a value under a certain number. Thank you so much for making the tutorials you do, you explain them very well and cover a lot of very useful things!
I was not able to do it by myself, but I saw the light when you mentioned that we should consider the previous logic state and the actual logic state of the button!!! That was a great insight!! Your videos are fabulous!!!
Honestly, toggle switches are the bane of my existence as I have always had issues with making them in both programs and videogames, and it's really annoying too because I have made very complex logic systems and made flight control chips using logic gates in games like Scrap Mechanic but I couldn't make a toggle switch, but now I finally found a way that works for all scenarios thanks to this video. Amazing teaching Paul!
Many thanks again Paul. I am just loving these awesome lessons! ❤️ I made an addition to the task for myself. Led will be on on every 3rd release of push button. Codes below: Variables int ledPin=2; int buttonPin=4; int buttonOld=1; int buttonNew; int ledState=0; int dt=500; Void setup(){ Serial.begin(9600); pinMode(ledPin,OUTPUT); pinMode(buttonPin, INPUT); // I AM POWERING THE BUTTONPIN USING A 5V VOLTAGE OUTPUT SLOT IN ARDUINO. void loop(){ buttonNew=digitalRead(buttonPin); Serial.println(buttonNew); if(buttonOld==1 && buttonNew==0){ if(ledState==0){ digitalWrite(ledPin,LOW); ledState=1; buttonOld=buttonNew; } } if(buttonOld==0 && buttonNew==1){ if(ledState==1){ digitalWrite(ledPin,LOW); ledState=2; buttonOld=buttonNew; } } if(buttonOld==1 && buttonNew==0){ if(ledState==2){ digitalWrite(ledPin,LOW); ledState=3; buttonOld=buttonNew; } } if(buttonOld==0 && buttonNew==1){ if(ledState==3){ digitalWrite(ledPin,LOW); ledState=4; buttonOld=buttonNew; } } if(buttonOld==1 && buttonNew==0){ if(ledState==4){ digitalWrite(ledPin,LOW); ledState=5; buttonOld=buttonNew; } } if(buttonOld==0 && buttonNew==1){ if(ledState==5){ digitalWrite(ledPin, HIGH); delay(dt); ledState=0; } buttonOld=buttonNew; }
Hi Paul! Your Arduino tutorials are amazing. Your teaching approach is "most excellent" and inspirational! I tried this tutorial and solved it with a while loop and two if statements. It was a great feeling to achieve this on my own. Keep up the good work, sir! Thanks again!
My new friend Gemini and I made the toggle switch slightly differently. Your excellent tutorials make it a lot easier to understand, and correct, the AI suggestions.
Hey Paul, I'm really enjoying your new Arduino series. Please keep the lessons coming. I can tell you are a great teacher and wished you had been my high school science teacher many years ago. I often feel like I am back in high school science class during the sessions. This was the most challenging exercise to date. Took me a couple of tries to dust off enough brain cells to reach a solution. I always try to complete the lesson before watching your solution. BTW, I am using parts of your series as inspiration in teaching my six year old grandson about electronics. He loves working with the Arduino.
Hello Mr. Paul, I am a student in middle school but I have to really admit ur lessons are superb & the best thing I have seen that you are also teaching the lessons of raspberry pi & raspberry pi pico. but the main motive of commenting you now is that I've already figured out how to make the pushbutton a toggle one, you just have to write this code :- if (digitalRead(buttonPin)==0){ while (digitalRead(buttonPin)==0){} digitalWrite(LEDPin, HIGH); } else if (digitalRead(buttonPin)==1){ while (digitalRead(buttonPin)==1){} digitalWrite(LEDPin, LOW); } This code will definately work.
I don't think this code will work for a Toggle Switch, let me explain why. When you press the button the Arduino terminator will go into the if statement "if (digitalRead(buttonPin)==0)" and then the Arduino terminator goes into the while loop "while (digitalRead(buttonPin)==0)" and stays in there until we stop pressing the button, after we are done with pressing the button the Arduino terminator goes to the following line of code which is turning on the LED and then the Arduino terminator gets out of the if statement and then it goes into the else if statement because we are not pressing the button, and then the Arduino terminator goes into the while loop and stays in there until we press the button and then it gets out of the while loop, and the Arduino terminator turns off the LED and then it gets out of the if else statement, and this is where the problem is, sins we are pressing the button now the Arduino terminator will go into if (digitalRead(buttonPin)==0) again and goes into the while loop and after we stop pressing the button we will turn on the LED again. I hope now you can see what the problem is. The problem is that the LED will always be on when you are not pressing the button, which to me is not a Toggle Switch. I hope that makes sense to you. Samuel
Great video series, thanks very much Paul. I came at this problem in a slightly different way: since the LED modes are binary (at least in this scenario), if you do a button counter (i++ [or j++]), you can then write an "if" statement to check if it is an even number - LOW if even, HIGH if odd. This also gives an advantage of being able to count the number of times the LED has been on & times button has been pressed (if you add a Serial.print!).
That's pretty much how mine worked too, but instead, I made 'x += 1;'. When x == 1, the light turns on, then after the next iteration when 'x==2', the light turns off and in the same block I put 'x = 0;' to reset it. It was a pretty simple way to code it.
I didn't figure this one out on my own, and when I saw your code, I still had to sit and work through it a while to understand what's going on, but I eventually got it! Thanks so much!
I've been binge-watching these tutorials lately, ever since 2015, I've been trying to figure language out but couldn't at least until now, You made this very easy, and I'm finally understanding how it works, most importantly remembering it, it's hard to remember some things when you have a learning disability, so tysm for making this easy.
Only did it with help from the internet! I managed to fathom out a toggle variable, button didn't track the button state. Not many of us would have realised that an 'Else' was required, as youv'e not shown this before. Made me think though. Keep up the good work.
I did it! Used a while loop white the button is pressed, and changed a boolean inside the while loop with an if, else if statement!! Thank you so much for your lessons Sir!
the line if(buttonOld==0 && buttonNew==1) made me so confused, I rewatch the video 3 times and started analyze the logic of the code, since if(buttonOld==1 && buttonNew==0) made way more sense to me! What made it more confusing is the program works both ways. Then i studied with 100% concentration, serial printed all values to analyze if i missed something....BOOM! the code works both ways, however the trigger time is different! It has been so long I lost the joy of studying and figuring stuff by myself. Thanks Mr. McWhorter, your lesson is way too good to be free on internet.
Got this exercise suprisingly quick tbh but did it in a different way, I read the value of the buttonPin and when it's pressed I use a while loop to wait until the button is released again to then switch the state of the LED. This uses less variables (no old/new) and makes it a bit easier to understand in my opinion. Still very interesting to see how you did it! Discovering multiple ways to solve a problem is the best way to learn and really get a solid understanding of solving problems on your own. I only recently got a kit and even though I have some programming experience in Python I'm quite new to electronics and racing through the vids right now.
I'm similar to you. Programming experience with little to no electronics experience. I also solved it the same way as you did. Check it button pushed, if it is, set the LED on, then wait for it to be released. When released, wait for it to be pushed again, when its pushed a second time, set the LED off and wait for it to be released again. when its released, let the program end so you start at the top again. I'm enjoying the combination of electronics and programming.
I was definitely mistaken by the appeared simplicity of the homework. I then fell into my bad habit trap of overthinking the absolute hell out the problem. Gave up and felt quite silly when I came and saw the answer. I'm happy you gave us this assignment, it seems to have gotten most people thinking quite critically! You are truly one of the most amazing teachers I've ever had the pleasure of studying under (even though not in a typical sense).
These lessons are great! You are such an amazing teacher. Having said that, I will have to reread some of the code written to follow along exactly how the commands make up a toggle switch. As you can probably deduce from that, I was NOT able to come up with the solution all by myself.
That took me a long time to wrap my head around. I tried numerous things with counters and switch values but need to see your example and then "draw it out" several times to see why it worked. Very elegant in the end. Thanks
After hours of banging my head against a wall I finally managed to get it working, with a bit of help from google i admit. I did it a bit differently, I made a counter and each time you press the button it adds 1. Then if the count is at an odd number the led is off, if its an even number it turns on
I couldn't figure out the coding on my own and had to see your code, then I had to watch the video 3 times to understand when the condition, "if(buttonOld ==0 && buttonNew==1)" became true, then the light literally turned on and I was able to understand. I am learning so much from you, keep up these most excellent tutorial videos.
Echoing the "great job" on this lesson. I had solved this on my own, but my solution was bit more complex. I detected the button press, then waited for the button release before toggling the LED. Your analysis and solution made me realize all I had to focus on is detecting when the button was released if it was already pressed.
Thanks for the tutorial! I was able to figure it out beforehand, however I used a slightly different approach. In my code, when digitalRead() detects a "0", I enter a while loop which continually performs more digitalReads() until it detects a "1". This indicates the button was released, so I proceed to do an LED state change which was quite similar to your implementation (though I used a boolean variable for LEDState rather than an integer).
If you use a while loop, your program will stuck in there until you release the button. It can't be used in programs with multiple things running simultaneously.
yes I do the lessons and the home work. I have been working on your lessons now for 3 months. I don't watch them like a Net flicks series. I move on to the next lesson after I understand the current lesson I am on, I play with the program to get a better understanding how it works and how to better apply the program under different conditions.
Hi, Paul🙂 Interesting tutorial, thank you very much as always) I did it like that before watching how you did it. const int redPin = 12; const int buttonPin = 10; int buttonRead; int redLEDState = LOW; void setup() { Serial.begin(9600); pinMode(redPin, OUTPUT); pinMode(buttonPin, INPUT); buttonRead = digitalRead(buttonPin); } void loop() { digitalWrite(redPin, redLEDState); int newRead = digitalRead(buttonPin); if (buttonRead != newRead && newRead == 1) { redLEDState = !redLEDState; } buttonRead = newRead; Serial.println(buttonRead); }
@@nahuel3256 It is, with one exception. He's declaring a new newRead variable with every loop. I don't think the Arduino does garbage collection, so he has a memory leak. Better to declare newRead as a global and just assign it a new value every pass through the loop. Other than that, it's definitely less code than my attempt :)
I don't think any other code has such ingenuity with fewer statements but works without any glitches and oscillation, especially at the release of the switch. Moreover, the way you explained with the dots on graph is amazing. No one can match you. Thanks Mr.Paul.
I got it myself by using 3 if statements and an On variable with 3 states 0, 1, & 2. If button = 0 & On = 0 turn led HIGH & On = 1 If button = 1 & On = 1 turn led HIGH & On = 2 If button = 0 & On = 2 turn led LOW & On = 0
I've looked up other arduino help before, and it's patchy at best. You lay it out and actually explain the content. You've answered questions I've long had that no one else has come close to answering. Thank you
man, all i had was "okay, when it goes from 0 to 1 it's gotta do somethin" but had no real idea how to make that 'somethin' happen til seeing it and now it's so obvious. Thanks for the great content!
This project was very difficult. Completed along with your explanation regarding the 2 variables and conditions associate with pushbutton and LED respectively. Thanks for your support.
I never thought that I'd learn so much from such a simple task! I figured it out my own way after a bit of head scratching but still thoroughly enjoyed how you broke it down and explained it. Love your videos and plan on using what I learn in my club, my future classes, and hopefully even one day on the job.
Another great video...my mother passed away a couple of years ago and she had this old flashlight that she always used. Her old flashlight will soon get an upgrade to an Arduino nano, as many LEDs as I can fit into the lens area and a variant of this toggle code. Also thanks to your Fusion 360 tutorials I'll be 3D printing and insert to fill the void of the battery compartment which will hold the nano and the batteries. Thanks for the inspiration!
This lesson kinda reminded me of working with rotary encoders, comparing a previous condition/state to a new one in order to determine the direction of rotation (clockwise or counterclockwise). Thanks for another great one, Semper Fidelis!
This one, took me more time than I am used to solving the assignments. But finally, with logic, I could achieve it. I AM A LEGEND AGAIN. Thank you, teacher, for bringing this type of enriching content
I'm loving the videos so far! for anyone watching this in the future, there are actually a few ways to code this. The most efficient I've found, was to just use while-loop-waits, much like waiting for user input.
I must admit.. this was the first asignment that i couldnt do by myself, i was trying for couple days and i watched video to see it done. Little demotivational but we are not giving up here!
Anyone else get preoccupied with code that they have written and never think of all the new things you're going to need for the new one? I'm going to start erasing all of what i've written before starting one of these "projects". Awesome job Paul!!! I'm trying to change my career path and these videos as well as this arduino are making learning to code SO much easier!!!!!
I did it by using a do-while loop nested inside an if-statement, if the buttonVal = 0, then do (digitalWrite High) while buttonVal = 1, and after the while loop finishes (when buttonVal = 0 again, when we press again), a digitalWrite(LOW) command comes. I have a brief previous C++ programming knowledge. Anyways, i am extremely thankful for your wonderful videos!
This one is a real step up in the coding, If i don't get it after a while I work through with Paul and then stop before boom to run the program myself and then train on the debugging which is just as important as the coding skill, after all we all make mistakes!
It took me longer than I thought it would. I had to leave it alone for a while and come back to it. I remembered dealing with "lead edge" and "lag edge" signals when troubleshooting a different problem which led me to a similar solution, but as others have said, yours was more efficient. Awesome challenge! I was tempted to give up because it seemed like the solution should be so obvious. Glad I worked it out myself. Thanks for the great videos.
I was not successful on my own. I had the basic logic but the "bounce" in the circuit kept making me think I was totally wrong. Adding in a delay was the key. Thanks for the great lesson. Very practical.
It is not a simple project at all like you said, but it was very interesting. I'm kinda embarrassed to say this but I had to spend 2 hours trying to work it all out because I didn't wanna rely on the answer. I used the voltage measure at the LED as the bright stage so that's why I declared an extra readled as an input. Thank you for providing such helpful videos about Arduino like this. Wish you all the best! P/s: Btw here's the code that I did: int readPin=9; int led=7; int vol; int ledvol; int readled=6; int i=1; void setup(){ Serial.begin(2000000); pinMode(readPin,INPUT); pinMode(led,OUTPUT); pinMode(readled,INPUT); } void loop(){ vol=digitalRead(readPin); ledvol=digitalRead(readled); Serial.println(ledvol); if(vol==1){ i=1; } if(vol==0){ if(ledvol==1&&i==1){ digitalWrite(led,LOW); i++; } if(ledvol==0&&i==1){ digitalWrite(led,HIGH); i++; } } }
I'm back: It's been 4 months since I had been able to be for these wonderful classes and one of the reasons was because I had actually stuck in this example, this extra time I have dedicated to study a little math and take a look at one or another Arduino book while I fed my brain with other classes of the Incomparable Master Paul McWhorter, The result has been wonderful, you teacher really do magic in the heads of those who really want to learn. And even though the code had come out to me, I finally discovered that there is not only one way to do it, well like all code.
I learned a valuable lesson in this one....count your curly brackets. I followed along as you coded (I had tried it on my own and wasnt'y successful) so I was amazed when it didn't work. I checked my coding looking for my inevitable typos, I checked and rechecked my wiring, I even asked my software engineer son what I did wrong...but it wasn't until I had you in one window, and my code in another that I saw an extra bracket. BOOM...it worked!
I took a different approach. I tried to do something along the lines you did with multiple special variables to record button state, but couldn't figure it out. After two days, finally got it working by using four different while loops. The button press kicks the program from one while loop to the next. And the loops change the LED state. The advantage of mine is it turns the LED on or off immediately when the button is pressed without needing to release the button first. I'm really glad I figured it out before watching this! I was close to giving up.
I got my solution for this on my first try. I added an additional digital input to monitor the state of the LED. I then used 2 If statements to compare LED states when the switch was pressed. Whatever state the LED was in when the switch was pressed was toggled to the next. Other than some debounce issues with the switch it all worked great. Thanks for the challenge.
Nearly got it first time. I was trying to make it as concise as possible so was using a while loop to do nothing while the button was up and only act when it was down. It mostly worked, but was a bit clunky and relied on the timer to make it work. Great tutorial.
WOuld not have solved this problem. Did not think about the two-state concept.Had to follow on this lesson. And that made it much more clearer. A good one that made me think deeper.
Hi Paul, this is a great tutorial. Thanks very much. About this problem, I have to admit that it was the first really challenging one for me. It took me one full day after many attempts trying to find out the logic behind and drawing several flow charts unsuccessfully . Finally came up with a solution directly in the programming window, kind of similar to yours. I introduced a variable that changes to 0 or to 1 in case the actual reading value is 0 or 1, by comparison to that variable (I guess like the previous state). So here is my coding (starting with A=1): buttonRead=digitalRead(buttonPin) if (buttonRead==A) { A=1;} else { A=0;} if (A==0){ digitalWrite (LEDPin,HIGH); } if (A==1){ digitalWrite (LEDPin,LOW); } delay(d);
Completed the task. Prior programming novice level helps. Drank lots of HOT coffee with creamer and sweetener. Not to mention 23 years in the service as an electronic technician. I definitely need the refresher. Great job keep the tutorials coming.
finally got it to working after several hours. forgot the "==" sign, didn't connect the pin correctly, there are many things that can go wrong, but I am glad to have made it. thanks, Paul!
Год назад
Fantastic episode, thank you. We had to watch because we weren't able to figure out the delay due to the Button bouncing by ourselves. Thanks one more time.
I figured it out easily, not because I'm smart but because I'm a programmer and the first thing that came to my mind was to use an old_state variable and (not digitalRead(LED_pin)) to toggle the LED state. Thanks Paul.
I tried to think in different strategies to make a toggle switch, such as, if it was possible to count the number of pressing the button, then it was possible to switch between the even and odd numbers. However, at last I went through this excellent lecture and learned how to make toggle switch! Thank you!
Im going to be honest and say that the task you set i couldn't do but understood once you explained it and done the demo in the video and now fully understand.
Have been struggling to learn Arduino and am often left wandering what the presenter is saying. THANK YOU FOR SLOWING DOWN! Several key points regarding writing code that I have missed, suddenly became clear from watching you type them in real time rather than saying here's the code copy and paste it. I will be looking at more of your tutorials as I go.
Thank you Paul, for your wonderful lessons! Here's another way to derive the same results using fewer variables - the general idea is when someone pushes the button, change the inputs (signal) going to the LED, if it remains unpressed, then do not change the inputs (signal) going to the LED int buttonPin=12; int ledPin=22; int Signal=0; int readValue; void setup() { pinMode(buttonPin,INPUT); pinMode(ledPin,OUTPUT); } void loop() { readValue=digitalRead(buttonPin); if(readValue==0) { Signal=1-Signal; digitalWrite(ledPin,Signal); } if(readValue==1) { digitalWrite(ledPin,Signal); } }
This doesn't work if you hold the button down. If you do, you constantly change the Signal value, which will cause the LED to flicker on and off. It will happen very quickly though, so you may not see it, but it's happening.
u should rename this tutorial from learning Arduino to learning and see how proper problem solving, explanation, motivation learning, and draw a smile on our faces works, love u, watching u from Egypt
Paul, after some trial and error , I was able to perform this before watching your video . However I did this by putting a digital read onto the LED as well . So now I could keep track where the button was and what state the Led was constantly . I then set a couple IF statements and Boom!!
All the Videos and books on State concept I have watched and read, did not help my to get over the hump of grasping how to code it. But in this Tutorial Paul McWhorter explained it in simple terms that I could understand and grasp it.
Hi Paul, absolutly brilliant tutorials. I love the in depth, how things work stuff, so informative. I managed to get the result but in a completely different way. No outside help but I have done some java coding in the past which I think helps. int LEDPin = 12; int buttonRead = 10; int buttonVal; int dt = 150; int toggleBit = 0; void setup() { // put your setup code here, to run once: pinMode (LEDPin, OUTPUT); pinMode (buttonRead, INPUT); Serial.begin (9600); } void loop() { // put your main code here, to run repeatedly: buttonVal = digitalRead(buttonRead); delay(dt); //Button not pressed. Do nothing and wait till it is pressed. while (buttonVal == 1) { buttonVal = digitalRead(buttonRead); Serial.print("Toggle = "); Serial.println(toggleBit); } //It's pressed but still do nothing!!!!!!! while (buttonVal == 0) { buttonVal = digitalRead(buttonRead); Serial.println("Button Pressed..."); } // Now it's released check the tracking ToggleBit value. If it's a 1 change to 0, if 0 then change to 1. if (toggleBit == 1) { toggleBit = 0; } else { toggleBit = 1; } //If the button has been released and the toggleBit is 0, turn the LED off. if (buttonVal == 1 && toggleBit == 0) { digitalWrite(LEDPin, LOW); } //If the button has been released and the toggleBit is 1, turn the LED on. while (buttonVal == 1 && toggleBit == 1) { digitalWrite(LEDPin, HIGH); Serial.print("Toggle = "); Serial.println(toggleBit); buttonVal = digitalRead(buttonRead); } } Hope putting my sketch is ok?
I was not able to figure out myself before to watch the video, my approach was far away and I become crazy :). Honestly, I had to watch the video a few time to understand the approach and finally I got it. Thank you very much!
Hi Paul! I managed to do the task on my own and in another way. What I did different is that I did 2 digitalReads with a little delay in between ( buttonVal1=digitalRead(buttonPin) ; delay(20) ; buttonVal2=digitalRead(buttonPin) ). Then I pretty much did as you did, only that I used a digitalRead for the LEDstate as well (yellowVal in my code). Thanks for the lesson!
![Tee Grizzley - Robbery 8 [Official Video]](http://i.ytimg.com/vi/34_vkNV6wrU/mqdefault.jpg)
please don't stop after lesson 68! this is so awesome! You are a very good teacher, and there is no one out there like you :D
North Adventure on video away from greatness
Are there videos till 68? I see those videos are as Private (from 43 to 68) and cannot watch them. Please confirm.
Yeah
He hearted the comment. must mean he just might.
I agree
Loving the series. Drinking beer though, kids and wife are asleep and I'm geeking out in the garage.
Sounds like a nice life
You sir, are the Organic Chemistry Tutor of Arduino. I always go to your videos if I want to continue in learning arduino. Great teacher, love to see more of your videos.
lmao this is so accurate
As a professional programmer, I thought I could do this on my 1st trial. I finally got it to work (after trying hundreds of times, with sips of coffee, and believing holding my breath will help) when I found out that delaying the loop was my only solution. I had doubts that what I did wasn't the best way of doing it. And then I saw it at 18:42 that explained what I was missing. And now I can't sleep because of the coffee :) Nevertheless, I finally felt the true satisfaction of saying "BOOOOOM!"
I've finished 28 lessons in 4 days and have completed all the homework and lessons including this one. I retired from teaching jr high coding and robotics. We never got into programming Arduino and I always wanted to, so I bought an Ellego and Vilros kit and when they arrived, I started on your lessons and I am having a blast.
Wow how 😮😮
I started out wanting to get a Technicians license for Ham Radio. Flash forward two years later and I have an extra class license, I went back to school to become certified in IoT, just so I could build my own SDR radio. I now teach Arduino and and Raspberry Pi classes to teenagers. I built an electronics lab in my house as well. I decided to work through all your videos because I recommend them to anyone wishing to learn this type of material. My teaching has greatly improved due to your videos. I am so glad that you explain the math and get students to try things on their own. I came up with a similar sketch (although I prefer to call it code) when trying to do it on my own. I'm currently working on a self driving robot car based on the Arduino platform. I could do this stuff all day and night! Thanks for the great lessons!
Have to admit, this one stumped me. Thanks for walking us through it.
I have been watching the series (old as well as the new and improved) repeatedly. Here is the thing for me. If you listen once, you heard it...if you follow along...you copied it...if you do it on your own after the previous, you remembered it...but, if you can create from what you have done previously, you have gained experience and knowledge, therefore...you have learned. I have LEARNED things by reviewing and practicing via your lessons. The things I have taken from your lessons is far more than I learned from dozens of books. For this I thank you, and ask that you continue to keep it simple and speak in "English" vs. speaking in trueNerd (bumpy text used there just for you). Keep up the good work!
I attempted this on my own, and got as far as assigning an independent tracker - in my case I used a boolean. What I did not think of was using && , so I kept falling down, cycling through random states. I also did not think of placing a small delay in the loop to make things a little cleaner; that was a very useful lesson. I then watched through and, although I wasn't able to work through it alone, the lesson afterwards made a lot more sense for having at least tried! Thanks Paul!
Hi, Paul...got to be honest with you, I couldn't work this one out by myself! The problemo was a tad confusing to solve, Old Bean, and after many cups of tea and a whole lotta head scratching and coding errors, I gave up and admitted defeat. The answer to the problem was even harder than I had imagined, so it was a good job that you went on to explain how to overcome this particular problem. Thanks again from across the pond....hope all's well over there with you and family, what with all this Coronavirus malarky. Stay in...stay safe...and stay "switched on".....pardon the pun. Regards....the Grumpy Limey.
I've been looking at the code over and over again and it's amazing how efficient the code is. It's quite confusing at first but I am starting to understand why it works. Many thanks for showing how to use a pushbutton as a toggle switch!
i forgot to mention in my previous comment, that your code is simple, elegant and clever and very important, validated. You kept the button pressed on to ensure it will not change, simple but effective validation.. WELL DONE!!!!
I appreciate that!
I was lost. You had to 'baby step' me through this one and that's okay.
I'm here to learn. And you sir, are a teacher.
Just wanted to share how I made a toggle switch, minimal code:
int swPin=8;
int LEDPin=10;
int LEDstate=0;
int j;
void setup() {
// put your setup code here, to run once:
pinMode(8,INPUT);
pinMode(10, OUTPUT);
Serial.begin(9600);
}
void loop() {
// put your main code here, to run repeatedly:
int swVal;
swVal=digitalRead(8);
if (swVal==HIGH){
LEDstate=abs(LEDstate-1);
digitalWrite(10,LEDstate);
Serial.println(LEDstate);
delay(500);
}
}
Using the ABS function returns either 1 or 0, opposite of the previous state. Thanks for all the great lessons.
This is fine, but it has a bug. Keep your hand on the button to see what is the issue :)
int isOn = 0;
void setup() {
// put your setup code here, to run once:
Serial.begin(9600);
pinMode(8,OUTPUT);
pinMode(13, INPUT);
}
void loop() {
while(digitalRead(13) == 1);
while (digitalRead(13) == 0);
if (isOn == 1) isOn = 0; else isOn = 1;
if (isOn) digitalWrite(8, HIGH);
else digitalWrite(8, LOW);
}
I was able to use your tutorial to turn an ultrasonic sensor into a switch whenever it read a value under a certain number. Thank you so much for making the tutorials you do, you explain them very well and cover a lot of very useful things!
I was not able to do it by myself, but I saw the light when you mentioned that we should consider the previous logic state and the actual logic state of the button!!! That was a great insight!!
Your videos are fabulous!!!
Honestly, toggle switches are the bane of my existence as I have always had issues with making them in both programs and videogames, and it's really annoying too because I have made very complex logic systems and made flight control chips using logic gates in games like Scrap Mechanic but I couldn't make a toggle switch, but now I finally found a way that works for all scenarios thanks to this video. Amazing teaching Paul!
Many thanks again Paul. I am just loving these awesome lessons! ❤️
I made an addition to the task for myself. Led will be on on every 3rd release of push button. Codes below:
Variables
int ledPin=2;
int buttonPin=4;
int buttonOld=1;
int buttonNew;
int ledState=0;
int dt=500;
Void setup(){
Serial.begin(9600);
pinMode(ledPin,OUTPUT);
pinMode(buttonPin, INPUT);
// I AM POWERING THE BUTTONPIN USING A 5V VOLTAGE OUTPUT SLOT IN ARDUINO.
void loop(){
buttonNew=digitalRead(buttonPin);
Serial.println(buttonNew);
if(buttonOld==1 && buttonNew==0){
if(ledState==0){
digitalWrite(ledPin,LOW);
ledState=1;
buttonOld=buttonNew;
}
}
if(buttonOld==0 && buttonNew==1){
if(ledState==1){
digitalWrite(ledPin,LOW);
ledState=2;
buttonOld=buttonNew;
}
}
if(buttonOld==1 && buttonNew==0){
if(ledState==2){
digitalWrite(ledPin,LOW);
ledState=3;
buttonOld=buttonNew;
}
}
if(buttonOld==0 && buttonNew==1){
if(ledState==3){
digitalWrite(ledPin,LOW);
ledState=4;
buttonOld=buttonNew;
}
}
if(buttonOld==1 && buttonNew==0){
if(ledState==4){
digitalWrite(ledPin,LOW);
ledState=5;
buttonOld=buttonNew;
}
}
if(buttonOld==0 && buttonNew==1){
if(ledState==5){
digitalWrite(ledPin, HIGH);
delay(dt);
ledState=0;
}
buttonOld=buttonNew;
}
Hi Paul! Your Arduino tutorials are amazing. Your teaching approach is "most excellent" and inspirational! I tried this tutorial and solved it with a while loop and two if statements. It was a great feeling to achieve this on my own. Keep up the good work, sir! Thanks again!
My new friend Gemini and I made the toggle switch slightly differently. Your excellent tutorials make it a lot easier to understand, and correct, the AI suggestions.
Hey Paul, I'm really enjoying your new Arduino series. Please keep the lessons coming. I can tell you are a great teacher and wished you had been my high school science teacher many years ago. I often feel like I am back in high school science class during the sessions.
This was the most challenging exercise to date. Took me a couple of tries to dust off enough brain cells to reach a solution. I always try to complete the lesson before watching your solution. BTW, I am using parts of your series as inspiration in teaching my six year old grandson about electronics. He loves working with the Arduino.
Hello Mr. Paul, I am a student in middle school but I have to really admit ur lessons are superb & the best thing I have seen that you are also teaching the lessons of raspberry pi & raspberry pi pico. but the main motive of commenting you now is that I've already figured out how to make the pushbutton a toggle one, you just have to write this code :-
if (digitalRead(buttonPin)==0){
while (digitalRead(buttonPin)==0){}
digitalWrite(LEDPin, HIGH);
}
else if (digitalRead(buttonPin)==1){
while (digitalRead(buttonPin)==1){}
digitalWrite(LEDPin, LOW);
}
This code will definately work.
I don't think this code will work for a Toggle Switch, let me explain why. When you press the button the Arduino terminator will go into the if statement "if (digitalRead(buttonPin)==0)" and then the Arduino terminator goes into the while loop "while (digitalRead(buttonPin)==0)" and stays in there until we stop pressing the button, after we are done with pressing the button the Arduino terminator goes to the following line of code which is turning on the LED and then the Arduino terminator gets out of the if statement and then it goes into the else if statement because we are not pressing the button, and then the Arduino terminator goes into the while loop and stays in there until we press the button and then it gets out of the while loop, and the Arduino terminator turns off the LED and then it gets out of the if else statement, and this is where the problem is, sins we are pressing the button now the Arduino terminator will go into if (digitalRead(buttonPin)==0) again and goes into the while loop and after we stop pressing the button we will turn on the LED again. I hope now you can see what the problem is. The problem is that the LED will always be on when you are not pressing the button, which to me is not a Toggle Switch. I hope that makes sense to you.
Samuel
Great video series, thanks very much Paul.
I came at this problem in a slightly different way: since the LED modes are binary (at least in this scenario), if you do a button counter (i++ [or j++]), you can then write an "if" statement to check if it is an even number - LOW if even, HIGH if odd. This also gives an advantage of being able to count the number of times the LED has been on & times button has been pressed (if you add a Serial.print!).
That's pretty much how mine worked too, but instead, I made 'x += 1;'. When x == 1, the light turns on, then after the next iteration when 'x==2', the light turns off and in the same block I put 'x = 0;' to reset it. It was a pretty simple way to code it.
I didn't figure this one out on my own, and when I saw your code, I still had to sit and work through it a while to understand what's going on, but I eventually got it! Thanks so much!
I've been binge-watching these tutorials lately, ever since 2015, I've been trying to figure language out but couldn't at least until now,
You made this very easy, and I'm finally understanding how it works, most importantly remembering it, it's hard to remember some things when you have a learning disability, so tysm for making this easy.
Only did it with help from the internet! I managed to fathom out a toggle variable, button didn't track the button state. Not many of us would have realised that an 'Else' was required, as youv'e not shown this before.
Made me think though. Keep up the good work.
18:04 is the funniest part on this series yet! Thanks Paul!
I did it! Used a while loop white the button is pressed, and changed a boolean inside the while loop with an if, else if statement!!
Thank you so much for your lessons Sir!
As always- excellent, practical explanation - including debouncing the switch. My solution used logical not (!) on LEDState in the if statements.
Love how you instruct!
Repetitive programming is the best way to learn. I've replayed and re-programmed many of your lectures! Thanks!
I tried many ways but never succeeded ..after watching this video i am feeling confident.. thanks so much
the line if(buttonOld==0 && buttonNew==1) made me so confused, I rewatch the video 3 times and started analyze the logic of the code,
since if(buttonOld==1 && buttonNew==0) made way more sense to me! What made it more confusing is the program works both ways.
Then i studied with 100% concentration, serial printed all values to analyze if i missed something....BOOM!
the code works both ways, however the trigger time is different!
It has been so long I lost the joy of studying and figuring stuff by myself.
Thanks Mr. McWhorter, your lesson is way too good to be free on internet.
Got this exercise suprisingly quick tbh but did it in a different way, I read the value of the buttonPin and when it's pressed I use a while loop to wait until the button is released again to then switch the state of the LED. This uses less variables (no old/new) and makes it a bit easier to understand in my opinion. Still very interesting to see how you did it! Discovering multiple ways to solve a problem is the best way to learn and really get a solid understanding of solving problems on your own.
I only recently got a kit and even though I have some programming experience in Python I'm quite new to electronics and racing through the vids right now.
I'm similar to you. Programming experience with little to no electronics experience.
I also solved it the same way as you did.
Check it button pushed, if it is, set the LED on, then wait for it to be released.
When released, wait for it to be pushed again, when its pushed a second time, set the LED off and wait for it to be released again.
when its released, let the program end so you start at the top again.
I'm enjoying the combination of electronics and programming.
Thanks, this worked for me too.
Your comment has everything I was going to say 😊
I was definitely mistaken by the appeared simplicity of the homework. I then fell into my bad habit trap of overthinking the absolute hell out the problem. Gave up and felt quite silly when I came and saw the answer. I'm happy you gave us this assignment, it seems to have gotten most people thinking quite critically! You are truly one of the most amazing teachers I've ever had the pleasure of studying under (even though not in a typical sense).
These lessons are great! You are such an amazing teacher. Having said that, I will have to reread some of the code written to follow along exactly how the commands make up a toggle switch. As you can probably deduce from that, I was NOT able to come up with the solution all by myself.
That took me a long time to wrap my head around. I tried numerous things with counters and switch values but need to see your example and then "draw it out" several times to see why it worked. Very elegant in the end. Thanks
Thank you very much. Great. I've learned to do it with millis(), not delay()
IT WORKED! THANKS A LOT SIR!
// PULL DOWN RESISTOR
int readPin = 2;
int outPin = 3;
int delayTime = 500;
int signal = 0;
void setup()
{
pinMode(readPin, INPUT);
pinMode(outPin, OUTPUT);
Serial.begin(9600);
}
void loop()
{
while (digitalRead(readPin) == 0)
{
digitalWrite(outPin, signal);
}
while (digitalRead(readPin) == 1)
{
digitalWrite(outPin, signal);
}
signal = !signal;
digitalWrite(outPin, signal);
delay(delayTime);
}
After hours of banging my head against a wall I finally managed to get it working, with a bit of help from google i admit. I did it a bit differently, I made a counter and each time you press the button it adds 1. Then if the count is at an odd number the led is off, if its an even number it turns on
I did this, but it made it flash whenever you held the button down.
I couldn't figure out the coding on my own and had to see your code, then I had to watch the video 3 times to understand when the condition, "if(buttonOld ==0 && buttonNew==1)" became true, then the light literally turned on and I was able to understand. I am learning so much from you, keep up these most excellent tutorial videos.
After banging my head against a wall for a microsecond, I got my version running before watching the video. (my secret: I did hold my breath)
Echoing the "great job" on this lesson. I had solved this on my own, but my solution was bit more complex. I detected the button press, then waited for the button release before toggling the LED. Your analysis and solution made me realize all I had to focus on is detecting when the button was released if it was already pressed.
Thanks for the tutorial!
I was able to figure it out beforehand, however I used a slightly different approach. In my code, when digitalRead() detects a "0", I enter a while loop which continually performs more digitalReads() until it detects a "1". This indicates the button was released, so I proceed to do an LED state change which was quite similar to your implementation (though I used a boolean variable for LEDState rather than an integer).
I too did the same way
SAME
If you use a while loop, your program will stuck in there until you release the button. It can't be used in programs with multiple things running simultaneously.
Did u do this without delay ?
yes I do the lessons and the home work.
I have been working on your lessons now for 3 months.
I don't watch them like a Net flicks series.
I move on to the next lesson after I understand the current lesson I am on, I play with the program to get a better understanding how it works and how to better apply the program under different conditions.
Hi, Paul🙂
Interesting tutorial, thank you very much as always)
I did it like that before watching how you did it.
const int redPin = 12;
const int buttonPin = 10;
int buttonRead;
int redLEDState = LOW;
void setup() {
Serial.begin(9600);
pinMode(redPin, OUTPUT);
pinMode(buttonPin, INPUT);
buttonRead = digitalRead(buttonPin);
}
void loop() {
digitalWrite(redPin, redLEDState);
int newRead = digitalRead(buttonPin);
if (buttonRead != newRead && newRead == 1) {
redLEDState = !redLEDState;
}
buttonRead = newRead;
Serial.println(buttonRead);
}
this is very elegant
@@nahuel3256 It is, with one exception. He's declaring a new newRead variable with every loop. I don't think the Arduino does garbage collection, so he has a memory leak. Better to declare newRead as a global and just assign it a new value every pass through the loop. Other than that, it's definitely less code than my attempt :)
I don't think any other code has such ingenuity with fewer
statements but works without any glitches and oscillation, especially
at the release of the switch. Moreover, the way you explained with the
dots on graph is amazing. No one can match you. Thanks Mr.Paul.
I got it myself by using 3 if statements and an On variable with 3 states 0, 1, & 2.
If button = 0 & On = 0 turn led HIGH & On = 1
If button = 1 & On = 1 turn led HIGH & On = 2
If button = 0 & On = 2 turn led LOW & On = 0
Yes. I did it after I checked the strategy drawing.
It is the most important part before the coding.
Thanks for this great lesson!
Sir please make lesson on SPI interface. .
Thanks in advance..
I've looked up other arduino help before, and it's patchy at best. You lay it out and actually explain the content. You've answered questions I've long had that no one else has come close to answering. Thank you
My sentiments exactly!
Damn this pushbutton toggle is logic intensive. I need more brainpower lol
man, all i had was "okay, when it goes from 0 to 1 it's gotta do somethin" but had no real idea how to make that 'somethin' happen til seeing it and now it's so obvious. Thanks for the great content!
cant do it by myself! :(
Same!
This project was very difficult. Completed along with your explanation regarding the 2 variables and conditions associate with pushbutton and LED respectively. Thanks for your support.
This one stumped me. I tried to get the program to look at LEDPin and ButtonPin. I got it to come in and stay on but not turn off
I had the same problem. Turned out to be the wiring. I only had pin12 going to the switch, but you also need the 5V.
I have the same problem with yours. Push buttom, it is on; push button again, it still on.
I never thought that I'd learn so much from such a simple task! I figured it out my own way after a bit of head scratching but still thoroughly enjoyed how you broke it down and explained it.
Love your videos and plan on using what I learn in my club, my future classes, and hopefully even one day on the job.
Fantastic!
Another great video...my mother passed away a couple of years ago and she had this old flashlight that she always used. Her old flashlight will soon get an upgrade to an Arduino nano, as many LEDs as I can fit into the lens area and a variant of this toggle code. Also thanks to your Fusion 360 tutorials I'll be 3D printing and insert to fill the void of the battery compartment which will hold the nano and the batteries. Thanks for the inspiration!
This lesson kinda reminded me of working with rotary encoders, comparing a previous condition/state to a new one in order to determine the direction of rotation (clockwise or counterclockwise). Thanks for another great one, Semper Fidelis!
This one, took me more time than I am used to solving the assignments. But finally, with logic, I could achieve it. I AM A LEGEND AGAIN. Thank you, teacher, for bringing this type of enriching content
LEGEND!
I'm loving the videos so far! for anyone watching this in the future, there are actually a few ways to code this. The most efficient I've found, was to just use while-loop-waits, much like waiting for user input.
I must admit.. this was the first asignment that i couldnt do by myself, i was trying for couple days and i watched video to see it done. Little demotivational but we are not giving up here!
this one was really hard but finally i got it using 5 while loop, thank you paul for making the concepts very clear with examples.
Anyone else get preoccupied with code that they have written and never think of all the new things you're going to need for the new one? I'm going to start erasing all of what i've written before starting one of these "projects". Awesome job Paul!!! I'm trying to change my career path and these videos as well as this arduino are making learning to code SO much easier!!!!!
I didn't get it without you. The answer was harder than I thought! I did give it multiple tries before watching you. I got close using a while loop.
I did this on my own, but the explanation on graph paper was incredibly insightful.
I did it by using a do-while loop nested inside an if-statement, if the buttonVal = 0, then do (digitalWrite High) while buttonVal = 1, and after the while loop finishes (when buttonVal = 0 again, when we press again), a digitalWrite(LOW) command comes. I have a brief previous C++ programming knowledge. Anyways, i am extremely thankful for your wonderful videos!
This one is a real step up in the coding, If i don't get it after a while I work through with Paul and then stop before boom to run the program myself and then train on the debugging which is just as important as the coding skill, after all we all make mistakes!
It took me longer than I thought it would. I had to leave it alone for a while and come back to it. I remembered dealing with "lead edge" and "lag edge" signals when troubleshooting a different problem which led me to a similar solution, but as others have said, yours was more efficient. Awesome challenge! I was tempted to give up because it seemed like the solution should be so obvious. Glad I worked it out myself. Thanks for the great videos.
This is a classic programming problem, and one much harder than you would expect. Glad you understand it now
I was not successful on my own. I had the basic logic but the "bounce" in the circuit kept making me think I was totally wrong. Adding in a delay was the key. Thanks for the great lesson. Very practical.
Didn't get this one going by myself. Knew I needed state variables but couldn't finish it. Thanks Paul for the clear instructions!
It is not a simple project at all like you said, but it was very interesting. I'm kinda embarrassed to say this but I had to spend 2 hours trying to work it all out because I didn't wanna rely on the answer. I used the voltage measure at the LED as the bright stage so that's why I declared an extra readled as an input. Thank you for providing such helpful videos about Arduino like this. Wish you all the best!
P/s: Btw here's the code that I did:
int readPin=9;
int led=7;
int vol;
int ledvol;
int readled=6;
int i=1;
void setup(){
Serial.begin(2000000);
pinMode(readPin,INPUT);
pinMode(led,OUTPUT);
pinMode(readled,INPUT);
}
void loop(){
vol=digitalRead(readPin);
ledvol=digitalRead(readled);
Serial.println(ledvol);
if(vol==1){
i=1;
}
if(vol==0){
if(ledvol==1&&i==1){
digitalWrite(led,LOW);
i++;
}
if(ledvol==0&&i==1){
digitalWrite(led,HIGH);
i++;
}
}
}
pressing the button will reset the buttonOld=0, releasing it will set buttonNew=1. enjoying the series. tqvm Paul.
I'm back:
It's been 4 months since I had been able to be for these wonderful classes and one of the reasons was because I had actually stuck in this example, this extra time I have dedicated to study a little math and take a look at one or another Arduino book while I fed my brain with other classes of the Incomparable Master Paul McWhorter, The result has been wonderful, you teacher really do magic in the heads of those who really want to learn. And even though the code had come out to me, I finally discovered that there is not only one way to do it, well like all code.
Welcome back!
I learned a valuable lesson in this one....count your curly brackets. I followed along as you coded (I had tried it on my own and wasnt'y successful) so I was amazed when it didn't work. I checked my coding looking for my inevitable typos, I checked and rechecked my wiring, I even asked my software engineer son what I did wrong...but it wasn't until I had you in one window, and my code in another that I saw an extra bracket. BOOM...it worked!
Excellent!
I took a different approach. I tried to do something along the lines you did with multiple special variables to record button state, but couldn't figure it out. After two days, finally got it working by using four different while loops. The button press kicks the program from one while loop to the next. And the loops change the LED state. The advantage of mine is it turns the LED on or off immediately when the button is pressed without needing to release the button first.
I'm really glad I figured it out before watching this! I was close to giving up.
I got my solution for this on my first try. I added an additional digital input to monitor the state of the LED. I then used 2 If statements to compare LED states when the switch was pressed. Whatever state the LED was in when the switch was pressed was toggled to the next. Other than some debounce issues with the switch it all worked great. Thanks for the challenge.
Nearly got it first time. I was trying to make it as concise as possible so was using a while loop to do nothing while the button was up and only act when it was down. It mostly worked, but was a bit clunky and relied on the timer to make it work. Great tutorial.
I will admit, it took all day tinkering with it, but I got it to work this evening!! Now, my reward it watching this video before I go to bed...
WOuld not have solved this problem. Did not think about the two-state concept.Had to follow on this lesson. And that made it much more clearer. A good one that made me think deeper.
I have to admit that this one completely kicked my butt. I completely overthought it.
Mr mcWhorter i just maid a robotic hand with a pushbutton and a servo just by watching your tutorials thankyou so much sir
Hi Paul, this is a great tutorial. Thanks very much. About this problem, I have to admit that it was the first really challenging one for me. It took me one full day after many attempts trying to find out the logic behind and drawing several flow charts unsuccessfully . Finally came up with a solution directly in the programming window, kind of similar to yours. I introduced a variable that changes to 0 or to 1 in case the actual reading value is 0 or 1, by comparison to that variable (I guess like the previous state). So here is my coding (starting with A=1): buttonRead=digitalRead(buttonPin)
if (buttonRead==A) {
A=1;} else {
A=0;}
if (A==0){
digitalWrite (LEDPin,HIGH); }
if (A==1){
digitalWrite (LEDPin,LOW); }
delay(d);
Completed the task. Prior programming novice level helps. Drank lots of HOT coffee with creamer and sweetener. Not to mention 23 years in the service as an electronic technician. I definitely need the refresher. Great job keep the tutorials coming.
finally got it to working after several hours. forgot the "==" sign, didn't connect the pin correctly, there are many things that can go wrong, but I am glad to have made it. thanks, Paul!
Fantastic episode, thank you. We had to watch because we weren't able to figure out the delay due to the Button bouncing by ourselves. Thanks one more time.
I figured it out easily, not because I'm smart but because I'm a programmer and the first thing that came to my mind was to use an old_state variable and (not digitalRead(LED_pin)) to toggle the LED state. Thanks Paul.
Had to go back to this just to marvel at how powerful yet simple, brilliant!
I tried to think in different strategies to make a toggle switch, such as, if it was possible to count the number of pressing the button, then it was possible to switch between the even and odd numbers. However, at last I went through this excellent lecture and learned how to make toggle switch! Thank you!
int buttonPin=2;
int LEDPin=4;
int dt=300;
int buttonState=1;
int j=0;
void setup()
{
pinMode(buttonPin,INPUT);
pinMode(LEDPin,OUTPUT);
}
void loop()
{
buttonState=digitalRead(buttonPin);
if(buttonState==0)
{
j=j+1;
}
if(j==1)
{
delay(dt);
digitalWrite(LEDPin,HIGH);
}
if(j==2)
{
delay(dt);
digitalWrite(LEDPin,LOW);
j=0;
}
}
al'hamdulillāh it's working!
Im going to be honest and say that the task you set i couldn't do but understood once you explained it and done the demo in the video and now fully understand.
Have been struggling to learn Arduino and am often left wandering what the presenter is saying. THANK YOU FOR SLOWING DOWN! Several key points regarding writing code that I have missed, suddenly became clear from watching you type them in real time rather than saying here's the code copy and paste it. I will be looking at more of your tutorials as I go.
Thank you Paul, for your wonderful lessons!
Here's another way to derive the same results using fewer variables - the general idea is when someone pushes the button, change the inputs (signal) going to the LED, if it remains unpressed, then do not change the inputs (signal) going to the LED
int buttonPin=12;
int ledPin=22;
int Signal=0;
int readValue;
void setup()
{
pinMode(buttonPin,INPUT);
pinMode(ledPin,OUTPUT);
}
void loop()
{
readValue=digitalRead(buttonPin);
if(readValue==0)
{
Signal=1-Signal;
digitalWrite(ledPin,Signal);
}
if(readValue==1)
{
digitalWrite(ledPin,Signal);
}
}
This doesn't work if you hold the button down. If you do, you constantly change the Signal value, which will cause the LED to flicker on and off. It will happen very quickly though, so you may not see it, but it's happening.
I missed the initial test but your explanations were so clear that it seemed almost easy... Wonderful!
u should rename this tutorial from learning Arduino to learning and see how proper problem solving, explanation, motivation learning, and draw a smile on our faces works, love u, watching u from Egypt
Paul, after some trial and error , I was able to perform this before watching your video . However I did this by putting a digital read onto the LED as well . So now I could keep track where the button was and what state the Led was constantly . I then set a couple IF statements and Boom!!
All the Videos and books on State concept I have watched and read, did not help my to get over the hump of grasping how to code it. But in this Tutorial Paul McWhorter explained it in simple terms that I could understand and grasp it.
Hi Paul, absolutly brilliant tutorials. I love the in depth, how things work stuff, so informative. I managed to get the result but in a completely different way. No outside help but I have done some java coding in the past which I think helps.
int LEDPin = 12;
int buttonRead = 10;
int buttonVal;
int dt = 150;
int toggleBit = 0;
void setup() {
// put your setup code here, to run once:
pinMode (LEDPin, OUTPUT);
pinMode (buttonRead, INPUT);
Serial.begin (9600);
}
void loop() {
// put your main code here, to run repeatedly:
buttonVal = digitalRead(buttonRead);
delay(dt);
//Button not pressed. Do nothing and wait till it is pressed.
while (buttonVal == 1) {
buttonVal = digitalRead(buttonRead);
Serial.print("Toggle = ");
Serial.println(toggleBit);
}
//It's pressed but still do nothing!!!!!!!
while (buttonVal == 0) {
buttonVal = digitalRead(buttonRead);
Serial.println("Button Pressed...");
}
// Now it's released check the tracking ToggleBit value. If it's a 1 change to 0, if 0 then change to 1.
if (toggleBit == 1) {
toggleBit = 0;
}
else {
toggleBit = 1;
}
//If the button has been released and the toggleBit is 0, turn the LED off.
if (buttonVal == 1 && toggleBit == 0) {
digitalWrite(LEDPin, LOW);
}
//If the button has been released and the toggleBit is 1, turn the LED on.
while (buttonVal == 1 && toggleBit == 1) {
digitalWrite(LEDPin, HIGH);
Serial.print("Toggle = ");
Serial.println(toggleBit);
buttonVal = digitalRead(buttonRead);
}
}
Hope putting my sketch is ok?
I was not able to figure out myself before to watch the video, my approach was far away and I become crazy :). Honestly, I had to watch the video a few time to understand the approach and finally I got it. Thank you very much!
Excellent!
with a lot of thinking I couldn't build the code to make the toggle at the beginning, but with your help i Did it.
Thank you M.r paul.
I tried myself, it is working. It's great on your part to insist on writing the code by myself.
Hi Paul! I managed to do the task on my own and in another way. What I did different is that I did 2 digitalReads with a little delay in between ( buttonVal1=digitalRead(buttonPin) ; delay(20) ; buttonVal2=digitalRead(buttonPin) ). Then I pretty much did as you did, only that I used a digitalRead for the LEDstate as well (yellowVal in my code). Thanks for the lesson!