Confirming this worked on my Mini 2 that already had 01.07.0200 fw, got rid of the Error Code 40011 after replacing the gimbal. Now its good as new! Thank you tons and tons. Great content , keep it up as always.
I got it on my DJI Mini 2 ! Starting firmware 01.03.0009 (ARB 1), flashed 20.06.0200 (ARB 1), calibration done and 40011 error gone, then succesfully reflashed 01.03.009 and all worked fine. Thanks very much for your video
You sir just brought my first Mini 2 back to life. It was bricked a couple of years ago after I replaced the entire body but just kept it with me somehow. Tried every method like Python but failed halfway in bringing it back so I had to admit I was a bit skeptical until I saw the gimbal straighten up during the first Flash using the Calibration Firmware, right then and there I know this is going to be good. Thank you so much!
Many thanks - your solution also worked on my Mini 2. My gimble was slightly tilted after bouncing off my amateur radio antenna wire. I forgot it was directly above me - when 2 hobbies collide :) It hit the deck. I replaced the front right arm and assessed there to be no visible damage to the gimble that I could see. I reassembled the drone and the horizon was straight again but the gimble alignment fault message persisted. Anyhow, thanks to you system it's fixed now. Good as new, apart from a couple of chassis screws that won't tighten into the top of the drone, nothing glue couldn't fix :)
Awesome ! I just replaced broken front right arm and gimbal......... all seemed to be working fine except for the annoying 40011 error which was constantly displayed on screen......... I followed your instructions and it worked perfectly.............. error GONE ! Cheers
service firmware works on many, not mini 4 pro yet (hopefully soon), thanks for the video. helped me not make a mistake . no up facing needed on some models
Hi i just noticed that f]drone hacks have a new pp that will unlock the Mavic 3 do you know if this can be installed on the rc pro controller or will it need to go on a phone .Thanks .
If I get a copy of the repair firmware, (not by spending) will I be able to flash it? Or should I really purchase it? Will it work for several drones to repair their gimbals?
Thank you for the detailed explanation. Unfortunately, my trial on mini 2 wasn't successful in fixing error code 40011. I got this error after running the python tool on the gimbal calibration. Anyway, after flashing the downloaded firmware, the gimbal calibration keeps failing at 90% of completion. I'm still looking for other hacks.
Wow, I just missed exactly your last step, which was not part of "normal" calibration. Now I have re-done all the steps as you showed in the clip. The error 40011 is cleared. It's been a long way since I started fixing the gimbal issues from my last crash. It works like a charm again. Thank you for sharing your experience. It's very much appreciated!
Рекомендую тем у кого похожая ошибка с подвесом.Сделал всё как в описании и помогло ,ошибка ищезла.Системная прошивка была по цене 2 фунта, это намного дешевле чем платить за туже процедуру в сервисе.
hello. very interesting video. I tried to follow the steps to do the same on my DJI mini 3 but I was unsuccessful. It loads the firmware but stays at 0%. any solution? thank you.
Apparently the camera had water damage, so sorted the problem by replacing it, and then used this guide, all worked well! Thanks to the video creator/uploader!
I did a lot of research and found out that my other code you mentioned is on it. A forum mentioned that on later firmware they written the motherboard serial to the gimble Imu and camera to prevent owners repair. If parts are replaced, there’ll be a mix match serial and the other code you mentioned will not erase by your method. I just bought a broken mini2 and didn’t know this.
Hi mate, my gimbal needs replacing. My main camera is fine. Can i just put my camera in a used gimbal housing? Keep my original camera and the original back to the camera. Will i get errors, Can all errors be removed? Mine is an air 2
vc nao pode disponibiliza o arquivo nao e nem pelo valo e sim pela dificuldade de pagar vc can not provide the file not and not by the valum and yes for the difficulty of paying
vc não consegue fornecer o arquivo não e nem pelo valor e sim pela dificuldade de fazer o pagamento com paypal aqui no brasil vc can not provide the file not and not for the amount but for the difficulty of making the payment with paypal here in brazil
![Felix "Unfair" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/Oswujxm2Ag0/mqdefault.jpg)
Confirming this worked on my Mini 2 that already had 01.07.0200 fw, got rid of the Error Code 40011 after replacing the gimbal. Now its good as new! Thank you tons and tons. Great content , keep it up as always.
How did you get the error file?
I got it on my DJI Mini 2 ! Starting firmware 01.03.0009 (ARB 1), flashed 20.06.0200 (ARB 1), calibration done and 40011 error gone, then succesfully reflashed 01.03.009 and all worked fine. Thanks very much for your video
Thanks for confirming that it works
You sir just brought my first Mini 2 back to life. It was bricked a couple of years ago after I replaced the entire body but just kept it with me somehow. Tried every method like Python but failed halfway in bringing it back so I had to admit I was a bit skeptical until I saw the gimbal straighten up during the first Flash using the Calibration Firmware, right then and there I know this is going to be good. Thank you so much!
If the video helps one person it was worth doing glad to help
Many thanks - your solution also worked on my Mini 2. My gimble was slightly tilted after bouncing off my amateur radio antenna wire. I forgot it was directly above me - when 2 hobbies collide :) It hit the deck. I replaced the front right arm and assessed there to be no visible damage to the gimble that I could see. I reassembled the drone and the horizon was straight again but the gimble alignment fault message persisted. Anyhow, thanks to you system it's fixed now. Good as new, apart from a couple of chassis screws that won't tighten into the top of the drone, nothing glue couldn't fix :)
Absolutely spot on thank you for uploading this, we successfully removed the error message following your video.
Glad it helped
@@FlymyPhantomabsolutely thank you.
Awesome ! I just replaced broken front right arm and gimbal......... all seemed to be working fine except for the annoying 40011 error which was constantly displayed on screen......... I followed your instructions and it worked perfectly.............. error GONE ! Cheers
Hi, can you share with me this firmware for calibration?
@@_VladIsLove_ watch the video........ he shows where to get it
service firmware works on many, not mini 4 pro yet (hopefully soon), thanks for the video. helped me not make a mistake . no up facing needed on some models
How to calibrate a DJI Neo gimbal after replacing a set of gimbals?
dji mini2 rc disconect dual band problems and menual 2.4gh ok.... fixd??
This worked like magic! thank you for this vid
Please could you tell me if this hack will work on my mini 2se, am struggling to actually find out if it does, thank you.
本月發現，DJI 已經能夠在連網後把航拍機的某些特別參數修改還原(reset)
Hi Dji mavic air2s full gimbal change all ok but camera calibrate error any firmware
y dont load the fireware into dronehacks?
Hi i just noticed that f]drone hacks have a new pp that will unlock the Mavic 3 do you know if this can be installed on the rc pro controller or will it need to go on a phone .Thanks .
How to clear error code 40021 mini 2?
It's appears when changing camera sensor thanks
If you are in the UK email me at flymyphantom@outlook.com
@@FlymyPhantom I can't email you
@@nieltech7386 oops flymyphantom@outlook.com
thanks brother, very helpful
friend. Your videos are very good. Do you have any idea or have you eliminated error 40011 on a DJI Mini 3?
If I get a copy of the repair firmware, (not by spending) will I be able to flash it? Or should I really purchase it? Will it work for several drones to repair their gimbals?
Dude it's. 1.50 buy it but yes if you get a copy it will work fine
@@FlymyPhantom I don't know how to pay that Unless they accept cash 🤣
Can't remember off the top of my head but paypal is an option
não entendi e 1,50 mais em que moeda euro ,dolar ?
I did not understand
1,50 in what? euro or dolar ?
Please help me, how to downgrade mine DJI mini 2 SE downgrade firmware from 01.00.0410 to 01.00.0360 ?
Thank you for the detailed explanation. Unfortunately, my trial on mini 2 wasn't successful in fixing error code 40011. I got this error after running the python tool on the gimbal calibration. Anyway, after flashing the downloaded firmware, the gimbal calibration keeps failing at 90% of completion. I'm still looking for other hacks.
Did you stand the mini on its end as shown
Wow, I just missed exactly your last step, which was not part of "normal" calibration. Now I have re-done all the steps as you showed in the clip. The error 40011 is cleared. It's been a long way since I started fixing the gimbal issues from my last crash. It works like a charm again. Thank you for sharing your experience. It's very much appreciated!
Wielkie dzięki👍, to działa😎!!!
Moja Stara wrsja frimware to 1.03.0000. Czy może ktoś mi powiedzieć czy to ARB1 czy ARB 2 jakie są różnice?
You're awesome, thanks.
Рекомендую тем у кого похожая ошибка с подвесом.Сделал всё как в описании и помогло ,ошибка ищезла.Системная прошивка была по цене 2 фунта, это намного дешевле чем платить за туже процедуру в сервисе.
hello. very interesting video. I tried to follow the steps to do the same on my DJI mini 3 but I was unsuccessful. It loads the firmware but stays at 0%. any solution? thank you.
Sorry I have no idea
Unfortunately doesn't work, always ends up with an error, now trying to get my drone working again...
Works for everyone else, what's the issue
Apparently the camera had water damage, so sorted the problem by replacing it, and then used this guide, all worked well! Thanks to the video creator/uploader!
Hi, what firmware is for calibrating Dji mini 1 with ARB2?
Should be listed on Ddd which one it is
Co to jest ten arb 1 arb2. Mam mini 2 firmware 1.03.0000.?którym to plik
Where can i buy the firmware?
Google dankdronedownloader
Awesome!
need lisence?
Not for drone hacks to flash quad
Mine crashed at 20% now it cant be seen on any com ports oh joy
Don’t work for me. I have the same firmware as yours.
Are you following all the steps carefully
I did a lot of research and found out that my other code you mentioned is on it. A forum mentioned that on later firmware they written the motherboard serial to the gimble Imu and camera to prevent owners repair. If parts are replaced, there’ll be a mix match serial and the other code you mentioned will not erase by your method. I just bought a broken mini2 and didn’t know this.
@@ramb0r0kr888 I can remove this error if you live in the UK email me at flymyphantom@outlook.com
@@ramb0r0kr888 I can remove the 40021 error if you live in the UK
Hi mate, my gimbal needs replacing. My main camera is fine. Can i just put my camera in a used gimbal housing? Keep my original camera and the original back to the camera. Will i get errors, Can all errors be removed?
Mine is an air 2
I thought I was in the promise land but gimbal calibration keeps failing on 0%
Is it just the 40011 error you have
vc nao pode disponibiliza o arquivo nao e nem pelo valo e sim pela dificuldade de pagar
vc can not provide the file not and not by the valum and yes for the difficulty of paying
vc não consegue fornecer o arquivo não e nem pelo valor e sim pela dificuldade de fazer o pagamento com paypal aqui no brasil
vc can not provide the file not and not for the amount but for the difficulty of making the payment with paypal here in brazil
Email me with firmware number please flymyphantom@outlook.com
please help me, my country not support to donate😢
how to free bro
Learn how to code then learn how it all works then build a tool that can do it for free 😊
hi bro, is free?
The firmware costs £1.50
@@FlymyPhantom Now it's impossible to download, the app not working.
email or password plz
@@Bilalhusainlaghari for what
@@FlymyPhantom 70.00.0200_wm161_dji_system.bin this file free download plz