your work is very commendable and you have my gratitude1 as I am new to cnc and of course eggbot. I am having difficulty in acquiring the guide circles and line through the centre can you please Help,thanks
GrblGru Thanks for the explanation. I have been wanting to build an eggbot since I read an article on the original many years ago, you have rekindled my interest!
@@grblgru Hello. Please help. I would like to use the rc servo has the lifting of the pen. What you need to edit in the program GRBLGRU (GRBL) Edit RC servo please settings tutoriál? Do not forget to set the RC servo slowly lifting and laying the pen otherwise the pen tip will be destroyed Thank answer
''Inkscape has received additional data from the script executed. The script did not return an error, but this may indicate the results will not be as expecte'' how do I solve this problem inkspace.
Please have a look at the macro file GRBL.dat. My settings are stored there. If you activate the macros you can download the settings directly into your controller.
Please download the program from goo.gl/quFpdZ After installation you will find the files in the folder ProgramData/GrblGru/ExampleData/DXF Please note that I used metric units. (mm)
Very cool project! *liked*
Wery nice !!! I like it !!
your work is very commendable and you have my gratitude1 as I am new to cnc and of course eggbot. I am having difficulty in acquiring the guide circles and line through the centre can you please Help,thanks
Sorry, but there was no interest in the Eggbot model, so I stopped maintaining it.
How is the y stepper connected to the z servo? It almost looks like a single motor but has too many wires for that.
That's two steppers.
One is for the swivel arm (Y) and the other for the pin lift (Z)
They're just stick together (backside to backside)
GrblGru Thanks for the explanation. I have been wanting to build an eggbot since I read an article on the original many years ago, you have rekindled my interest!
@@grblgru Hello.
Please help.
I would like to use the rc servo has the lifting of the pen.
What you need to edit in the program GRBLGRU (GRBL) Edit RC servo please settings tutoriál?
Do not forget to set the RC servo slowly lifting and laying the pen otherwise the pen tip will be destroyed
Thank answer
''Inkscape has received additional data from the script executed. The script did not return an error, but this may indicate the results will not be as expecte''
how do I solve this problem inkspace.
Can u tell about controller and firware used in this eggbot.???
I use a normal Arduino Uno with GRBL V1.1 and a CNC shield
How to flash Arduino with grbl...can u tell me???
See ruclips.net/video/d9fIIRBER1w/видео.html
GrblGru please give ur email I'd...so I can directly contact u...
can I see you your Grbl setting please?
Please have a look at the macro file GRBL.dat. My settings are stored there.
If you activate the macros you can download the settings directly into your controller.
Please reply as soon as possible
please give me your extended files, thanks
Please download the program from goo.gl/quFpdZ
After installation you will find the files in the folder ProgramData/GrblGru/ExampleData/DXF
Please note that I used metric units. (mm)
@@grblgru Hello
No found download delete files no found download :(
Please new link
Thank