Hello, the technician that build my pc go with below scenarios. 1. Tempered glass on top 2. Air exhaust AIO with3x120 mm fans at side. 3. Air exhaust with 2 x 120 mm at rear 4. Air intake with 3 x 120 mm at the bottom The difference from your suggestion is the air flow at side AIO.(you have suggested to have air intake.) Do you think should i change ? Or any advice, please…
Thanks! Well the thing is, their vertical GPU mount fits with bottom fans as well as the rear fans. BUT, for instance if you place an ASUS TUF, which is a bulky card, gets really close, almost touching the rubber part of the fans. Fans spin, but it is a tight fit. And of course, tubes can't run from the bottom part of the pump/block top. With one fan, 100% fit!
Thank you. Basically, I just went with orange in MSI Dragon Center and since you have the possibility to adjust the Red, Blue and Green, I removed the Green completely out of the equasion, placing zero on that color. ;) Hope it helps.
Is it possible to somehow get a list of all the things that are built in this pc ? Especially the exact type of msi rtx 4080 and what ram you used. I really like you build !
Yes of course. Here is the list: - AMD Ryzen 9 7900X3D - MSI MPG B650 CARBON WIFI - MSI GeForce RTX 4080 Super Gaming X Slim - Kingston FURY Renegade RGB DDR5 2x 16GB 6400MHz - Kingston FURY Renegade PCIe 4.0 4TB - Lian Li O11 VISION COMPACT - Lian Li GA II LCD 360 - Lian Li EDGE 1000 Platinum - Lian Li UNI FAN TL LCD 120 Regular Blade black (2x pieces) - Lian Li UNI FAN TL 120 Reverse Blade black (6x pieces) - Lian Li UNI FAN TL 120 Regular Blade black (3x pieces - only for the top MESH panel) That sums it all up. :)
@@PCCrazyDario btw what's your thoughts about putting an aircooler on this case? Im planning to buy the lian li 011 vision white, and putting a Deepcool ak500 white in it. I just love air coolers
@@Dakhanavar99 I will be honest with, it literally never crossed my mind. But if you have it already, shouldn’t be bad in MESH configuration. If you go with TG, you will see couple of degrees increase, but unfortunately, I don’t know exactly how much.
I might I have missed this in the video. How was the cpu thermals, if you had the two rear, three bottom fans as intake and have the cpu radiator placed vertically in the front for air discharge ? Ty
there doesn't look like a whole lot or room down the bottom for cables if using a full ATX board.. looks like the fans will make that very limited space indeed at the bottom. which the antec cosmos has the same issue.
And this is why people like me exist... Maybe I can't cover everything in the video, but I can always reply on a comment. So yes, you can. For proof, you simply go to their official website that is related to Lian Li O11 VISION COMPACT, you scroll a bit and the you see the first white build where they are showing HydroShift LCD 360 with UNI FAN TL and TL LCD at the back. Scrolling further, we have a black version of the mentioend case. We have a HydroShift LCD 360 placed at the top, but this time they are using UNI FAN SL and SL LCD WIRELESS. And finally, hope this clarifies things a bit. ;)
Insignificant and haven't had issues. After all, nothing to head up since the GPU is getting fresh air from the bottom fans and the CPU is already cooled from the AIO. Yes, 240 can fit...
It varies from region to region. So basically you have to search all the parts on your local store and for the Lian Li products you can check the links in the description.
It doesn’t have a reset button because, apparently, that’s what makes it "minimal"-as if one extra button would ruin the minimal aesthetic of the case -_-. Truly a tragic design choice by the manufacturers
@@toonnut1 Yeah, I get it haha. Woke up today with bad synuses because my kid wouldn’t sleep unless he was literally sleeping on me. 🤣 What a night… 😅 Thanks for the comments and glad you like the video.
The best thing is you can put 3 more fans behind the radiator to help the fans at the front of radiator
Push pull AIO on the side as intake is the best.
I was curious to see this case in depth. Thumbs up for great videos!
@@weirdodude1173 Thank you very much. Glad you like it 🤗
Love the color combo of the build 🤘😉
Cheers bro! 😎
Hello, the technician that build my pc go with below scenarios.
1. Tempered glass on top
2. Air exhaust AIO with3x120 mm fans at side.
3. Air exhaust with 2 x 120 mm at rear
4. Air intake with 3 x 120 mm at the bottom
The difference from your suggestion is the air flow at side AIO.(you have suggested to have air intake.)
Do you think should i change ? Or any advice, please…
He is correct. Leave it. How are your temps? What GPU? In summer, you can swap mesh if it gets hot.
Finally a black build, I have a question, can you mount the gpu vertically on this version?
I think you can yea
Thanks! Well the thing is, their vertical GPU mount fits with bottom fans as well as the rear fans. BUT, for instance if you place an ASUS TUF, which is a bulky card, gets really close, almost touching the rubber part of the fans. Fans spin, but it is a tight fit. And of course, tubes can't run from the bottom part of the pump/block top. With one fan, 100% fit!
PNY XLR8 VERTO EPIC-X 5mm of space from the rear fans, some strange shaped Gigabyte card, no problems at all... So I think you are good to go. :)
Beautiful!! Can you please share the RGB profile? That "gold" on black hue is looking is killing it!
Thank you. Basically, I just went with orange in MSI Dragon Center and since you have the possibility to adjust the Red, Blue and Green, I removed the Green completely out of the equasion, placing zero on that color. ;) Hope it helps.
@@PCCrazyDario Awesome! TY!
@@vonniccoli1190 You are welcome. :)
Is it possible to somehow get a list of all the things that are built in this pc ? Especially the exact type of msi rtx 4080 and what ram you used. I really like you build !
Yes of course. Here is the list:
- AMD Ryzen 9 7900X3D
- MSI MPG B650 CARBON WIFI
- MSI GeForce RTX 4080 Super Gaming X Slim
- Kingston FURY Renegade RGB DDR5 2x 16GB 6400MHz
- Kingston FURY Renegade PCIe 4.0 4TB
- Lian Li O11 VISION COMPACT
- Lian Li GA II LCD 360
- Lian Li EDGE 1000 Platinum
- Lian Li UNI FAN TL LCD 120 Regular Blade black (2x pieces)
- Lian Li UNI FAN TL 120 Reverse Blade black (6x pieces)
- Lian Li UNI FAN TL 120 Regular Blade black (3x pieces - only for the top MESH panel)
That sums it all up. :)
@@PCCrazyDario thank you so much for the quick reply !
@@Yukishdw Not a problem 🤗
Lian li has great cases like this one, wich i love, but paying for 3 lian li fans 70% for the price of the case its just not for me!
I do agree their cases are totally brilliant. I see a trend with the fan prices going up from all the vendors unfortunately.
@@PCCrazyDario btw what's your thoughts about putting an aircooler on this case? Im planning to buy the lian li 011 vision white, and putting a Deepcool ak500 white in it. I just love air coolers
@@Dakhanavar99 I will be honest with, it literally never crossed my mind. But if you have it already, shouldn’t be bad in MESH configuration. If you go with TG, you will see couple of degrees increase, but unfortunately, I don’t know exactly how much.
Yep spend 120 on case and 300+ on fans
The guy with 11 TL LCD fans: yes
Is the top mesh included or do you need to buy this as an extra option?
Actually, the case comes with the top bracket and top mesh installed. The TG is included in styrofoam also in the box.
I tried original evo, vision, and XL. I can't move from XL, it is still the best for me.
Well if you need space, then XL was a perfect choice. :)
@@PCCrazyDario Do you have recomendation for full mesh atx case, bro?
@@GanJosie Lancool 207 is an outstanding case.
Does the set include two top panels, glass and mesh?
Yes, both are included.
If I decide to use some othe company fans (say for instance cooler master) with individual wiring for each fan, will it pose an issue?
I might I have missed this in the video. How was the cpu thermals, if you had the two rear, three bottom fans as intake and have the cpu radiator placed vertically in the front for air discharge ? Ty
I did not test that. Side and bottom intake, top and rear exhaust - this was my configuration
@@PCCrazyDario thanks for getting back so quickly. . Please let me know if you ever do test it.
there doesn't look like a whole lot or room down the bottom for cables if using a full ATX board.. looks like the fans will make that very limited space indeed at the bottom.
which the antec cosmos has the same issue.
I have the same case and my CPU Temp is 28-30
Intel right?
With glass on top? What GPU and fan set up?
@@MOAB-UT GPU setup, regular... Fans are intake bottom and side, exhaust rear...
@@PCCrazyDario Thanks. I think side exhaust is cooler.
I wanna know if I can put a 360 aio on top with the two rear exhaust fans god that’s all I wanna know can someone tell me pls?!
And this is why people like me exist... Maybe I can't cover everything in the video, but I can always reply on a comment. So yes, you can. For proof, you simply go to their official website that is related to Lian Li O11 VISION COMPACT, you scroll a bit and the you see the first white build where they are showing HydroShift LCD 360 with UNI FAN TL and TL LCD at the back. Scrolling further, we have a black version of the mentioend case. We have a HydroShift LCD 360 placed at the top, but this time they are using UNI FAN SL and SL LCD WIRELESS. And finally, hope this clarifies things a bit. ;)
You linked the Galahad AIO. Looks like maybe you replaced the fans with the TL LCD Reverse fans?
@@kevinp_25 Yes, the fans are UNI FAN TL 120
@@PCCrazyDario Very cool (pun intended). The Hydroshift 360 won't fit on the side?
@@kevinp_25 It can fit but on top with the mesh panel.
Can i fit a 240 mm aio at the back ... I more question if the air from the 360 mm radiator coming inside will it not increase the inner temperature ??
Insignificant and haven't had issues. After all, nothing to head up since the GPU is getting fresh air from the bottom fans and the CPU is already cooled from the AIO. Yes, 240 can fit...
does the both "mesh" and "glass" panel comes in the box ?
Yes, both panels come with the box.
@@PCCrazyDario thank you for the reply really in the need of it ❤
Hi, will this case accommodate the corsair rm750x psu?
May I know the components?
Mind if I copy and paste this build?
@@KayKashi Be my guest. I don’t mind of course. 🤗
how thick can the radiator be to not collide with the gpu?
what brand of cable sleeve you are using?
@@eduardmc Actually, these come with Lian Li EDGE 1000 Platinum PSU
@@PCCrazyDario thanx didnt know
@@eduardmc No problem man 😉👌
sorry i didnt undestund clearly...my english are not perfect....!! i have the o11 vision with glass on top!!! can i replice it with panel or?
No you can’t because it doesn’t exist for O11 VISION. O11 VISION COMPACT has different dimensions and MESH panel comes inside the box of it.
@@PCCrazyDario thanks for the replice sir!!!
Hi, can you review darkflash TH285m and invasion genesis-m airflow comparison too? thank you..
Hi, unfortunately I doubt it. I have a really tight schedule in videos, plus I don't have those products. Sorry
Do you know if I can fit the Hydroshift 360 Aio on the side??
Fits at the top with MESH top. :)
Hi.
Is it possible to install a top bracket for fans or radiators in the o11 vision "chrome" too? 🙏🙏🙏
No
for the back you can ou can't go with 140 mm ?
no 120
its perfect
Beautiful pc how much it cost please ?
It varies from region to region. So basically you have to search all the parts on your local store and for the Lian Li products you can check the links in the description.
If your ever gona bless up a viewer with this pc. I pray it’s me 💅🏻
Im waiting for the DarkFlash DY470
Unfortunately, I don’t think you’ll have the chance seeing it on my channel. Sorry. :/
It doesn’t have a reset button because, apparently, that’s what makes it "minimal"-as if one extra button would ruin the minimal aesthetic of the case -_-. Truly a tragic design choice by the manufacturers
.
@@Ryhillchibulls 😅
7:26 🐽
Thanks for letting me know and apologies. Cutting it out, just waiting for YT to process it.
@PCCrazyDario don't apologise it was funny bro 😂 thanks and I appreciate your video
@@toonnut1 Yeah, I get it haha. Woke up today with bad synuses because my kid wouldn’t sleep unless he was literally sleeping on me. 🤣 What a night… 😅 Thanks for the comments and glad you like the video.
@@PCCrazyDario 😂👍
AIR FLOW should be mandatory and a standard for cages in 2025.
No air flow, product by law can not be sold.
True and agree, but in this case it is a small difference which I show in the becnhmarks. 😉
@@PCCrazyDario sure. Not saying about trusted brands 🤣
@@napoficial7123 Ah yes, now I understand completely. 😅