Setup TP-Link Router as a Wireless Access Point [2 Methods]
HTML-код
- Опубликовано: 17 май 2023
- This tutorial will guide you to set up your TP-Link router as a wireless access point, which could transform your existing wired network into a wireless network and extend your network coverage.
Наука
One perfect video, especially for the workaround without operation mode 👌
Thank you so much for the explanation of the 2 methods.
Your video saved so much of my time and effort. Thank you so much for explaining everything properly.
Perfect video. no nonsense. straight to the point. Subscribed. worked like a charm. I had the operation mode in access point tplink, and once i set that, everything worked automatically after that.
bro how to make the range extender (repeater) without lan cable wirelessly ?
this is awesome thank you, I was confused when TP link said we can just connect the main router to second router through WAN , I thought method 2 was the only way. Now i know they have method 1 came in handy for some router
Thank you so much for this video... Direct to the point and was really helpful in setting up my extended wireless in 1st floor..
Superb explanation.. After so much of void videos finally got one meaningful
Very helpful. Thanks 🙏
Thank you. Worked like a charm
Worked great. Thanks foe this video!
Excellent video, thank you!
Hey! That worked great. Thank you
Thanks it worked for me I followed all of your steps
thanks worked fine in minutes
Best ever video !! Thank you so much bro !!
great video ...many thanks for sharing...
Thanks. Really work on mine without operation mode.😊
Really thanx Boss....its working
is usb of router archer a7 can be accessible remotely in AP mode as earlier accessible in main router mode?
perfect, thanks for helping
It works for me.. thanks bro
Great video.
Many thanks to you , bro
AP wifi is working perfectly in laptops, but not working in phone any reason why?
Essalam Alaykoum, Hello Bro, thank you very much for all these details, please tell me, could we use the same parameters to configure the Archer VR300 and VR600 routers? THANKS
Can we use different company routers? Example I have an D Link and TP Link... Will it work in that case..
I have a question… I don’t know much about extenders.. if I connect my router to the extender through Ethernet, can I use the “Ethernet internet” to create a new WiFi through the extender, while my routers wireless WiFi is turned off? I’ll appreciate every answer 🙏🏻
Dude, which router did you turn into access point? the main router or the other one or both? I'm talking about in-built AP mode
easyyy-peassyyyy🎉 make sure the power is on for every electronic box power has to connect to 😊
For those who are struggling, make sure you “reboot” after performing those steps.
Thank you very mouch!
Thank you ❤
Thank you for the video. How do I setup router with same SSID as main router?
My main router is downstairs and I am trying to use my tplink router as an extender. How do I got about this if I can't connect both routers with an internet cable
Thanks for this video, i've been looking for a solution for my home network. Coz my wifi is not reaching my room but there's a ethernet cable on the wall that i can use for access point. Question is if i connect my Pc to the access point through Lan cable, can i still use the wifi for my mobile phones and tablets? Thanks for the response.
Okey this might be a stupid question but if i connect the tp link router to a router with 2.4GHz does the 5GHz work on the tp link or is it not faster than the router its linhed to??
Any other option without lan cable?
The second option, point accès, is it set up with an RJ45 cable or without a cable
With the second method will I be able to connect wirelessly
Very nice
hello! I bought tp link td w 9970 v4 ,i want to do it access poin, its possible that?
I love indian from pgilippines so good at technology
Thank you
Thanks bro🙏👍
Wowww... Superb anna... Picha. Clarity ichav
Does this router have a mac clone feature ?
after rebooting in the second option, I cant access the router again with the new IP address or the previous one, it simply says nothing was found
Sir konse port mai ethernet cable dalna hai wan mai ya LAN mai
what if the ip address of the tplink access point router is by default different from main router, do we still need to change ip of access point router?
can we enable guest network with this mode?
Can the access point be connected to the modem wirelessly?
This work for me bro Using TP Link AX55 now connected to AP mode
For first time I found that the Router Mode was working when connecting to the main router. But later months it's had issues like dropping connection, terribly slowing down internet speed that unable to run the speed test etc. Only after changing to Access Point mode this problem was resolved. However, I didn't have have dynamic IP anymore when connecting to the internet in Access Point mode. In such mode only assigned static IP provided by the main router (inspite of DHCP enabled in this router). DHCP setting also greyed out in TP-link. Is there a means to have dynamic IP to all the devices connected to TP-link ? or any possibility to change back to Router Mode again ?
Best Video
Thanks.
I have madearcher a6 5ghz wds bridge with airtel xstreme fiber router.I think it is CG nated but ip is in 122. range.I have one synology nas to lan network.Not able to port forward or DMZ is not working i think.Can you help me out pls❤
1 problem on your connection though, you not supposed to connect the cable to the WAN port on the AP. Must be the LAN port
How do I keep one single WiFi name or connection with multiple access points. Here it is having separate WiFi name to connect either using access point or router mode.
what if I dont want to connect ETH from main to Extender, and I just want to range extend via WDS bridging?
Can you use this as a satellite router?
bro, the default security of the router is incorrect, i cant connect to it, i'd try to reset it, but still cant get into it, do you know the solution? thanks in advance!
I tried. the AP router connected with internet. but the internet access is limited. i can watch youtube. but i could not use internet banking, ebay. and some web could not connected. why this happened?
Please share if you got some solution.. I am also facing the same issue
I have followed your instruction to a "T" and I still get no Internet.
Have you found a solution to this? I tried both method and couldn’t get any internet access. Thanks.
@@vincekhoo3278any updates?
Try resetting the router again. Using the reset hole
Try to pay ur internet bills first or find an isp if u don't have one yet
@@andikaputra4761 hahah😂😂😂
any idea how to setup diynamic
How about as a Repeater Mode??
Excellent, most directions miss which port to use.
You said it's wireless... but in the last the wire shows connected to each other router.. I need wireless connectivity for extended router. Pls tell the method. Thanks
You should try to read up and get a better understanding of Wi-Fi and connections. I don't mean that in a bad way I just mean it's rather confusing unless you have a little more knowledge. however it can all easily be found online. in order to extend or boost the Wi-Fi you have to have Wi-Fi. so if you were talking about extending it with a router you need an ethernet cable or you need to get one with a Poe switch so you don't have to plug it in but you're still going to need the ethernet cord. otherwise you're talking about a range extender or something that just plugs in. not a router. look into Wi-Fi range extenders and mesh systems
After i get kicked from admin menu i cant get back after i reload. But the internet is online. Any info?
Please make a new video as all the options have been changed in the new format and I am unable to find these options now
same
How can I connect tp link router wirelessly to main router's network
I too need this, please anyone help
Repeater mode on second router
@@saivineethgaddam9194wds bridging router that is simple just look for wds or something similar
Router mode interrupts with you main router. It's advisable to use it as access point mode ir range extender because it won't interrupt with the main modem or router.
Hi. Could you explain a little bit more?
@@rsorez329 sorry my explanation was kinda confusing. Don't use it as router mode because it can interrupt with your main modem. I use it as Access point or Range Extender and I had no problem at all with those settings.
@@eddyjayarsinahon8433Hi, I have a question. How can I make my main router focus only on (prioritize) my PC, and the router that works as an access point (for my guests) doesn't interfere with the performance of the main router? Because I notice every time many people use the internet, the connected devices cause my internet to experience packet loss and it bothers me a bit.
After reboot wifi saying unable to get ip
why do you use wan port on the first scenario but lan port on the second?
The WAN port in a router is used to connect the router to the internet or a modem. It is used to receive data from the internet and distribute it to the devices connected to the router. On the other hand, LAN ports are used to connect devices within a local network. They are used to transfer data between devices connected to the router.
In the Access Point mode, the WAN port is not used. Instead, the router is connected to the internet via a LAN port. This is because the router is not responsible for routing traffic in this mode. It is only responsible for providing wireless access to devices connected to it.
In the LAN settings, the WAN port is also not used. Instead, the router is connected to the internet via a modem. The modem is connected to the WAN port of the router. The LAN ports are used to connect devices within the local network
@@thinkdeeperdeeper3147 thanks for the explanation but you didn't understand either my question or the video. you said "In the Access Point mode, the WAN port is not used" but the video clearly shows the WAN port being used. i'm talking about the tp-link router, not the main router.
@@joegame4576the video is not accurate when making the router an access point (AP) connect the two routers lan to lan not lan to wan. So the Ethernet cable would be connected to main router lan port and to second routers lan port (not the second routers wan port). Hope this clears ur doubt.
I'ts not posible use ther rotuer as full bridge switch, have the full potentiality of the wifi and the 4lan disponibly for connect multiples devises in all in the same network as the main router?
TP-Link provides "Operation Mode" menu and enables the WAN port to work similar to LAN-LAN in "AP mode" and still provide 4 LAN ports to be used. In regular router which doesn't have that menu, you have to use the second method because WAN port is still WAN port and you need LAN port to connect both routers so that leaves you 3 LAN ports to use.
fun fact, you don't need to select it as access point.
switch to wifi mesh will greatly improve wifi coverage without losing speed or latency.
In the second option, you disabled changed Lan address to 192.168.0.2 and disabled DHCP server. Conected via lan port to lan port to main router rather lan port to wan port. Will wifi work with this config? If yes then ip address will be issued by the main router DHCP.... right?
Yes, devices can be connected to the WiFi of the secondary router even when there is no wire in the WAN port of the secondary router. In this setup, the secondary router is connected to the main router via a LAN port. The WAN port of the secondary router is not used.
When the secondary router is connected to the main router via a LAN port, it acts as an access point. The access point provides wireless access to devices connected to it. The devices connected to the secondary router will be able to communicate with devices connected to the main router, as long as they are on the same network.
It’s important to note that the secondary router should be configured to operate in Access Point mode. This mode disables the router functionality of the secondary router and allows it to function as an access point. You can configure the secondary router to operate in Access Point mode by disabling DHCP and NAT
How to control secondary router
quick question which method is better 1st or 2nd?
2nd
1st
How to access tp link 841N router other network
Same here. I have an archer 7 and a 841n and I can't get either one to work with my new router.
hello, can i connect 4 access point on my main router? example I connect 1 AX23 to my Main Router and then I connect another AX23 on my first AX23 and so on its like I bridge 4 access point but only on is connected to the Main Router.
Main Router > AX23 > AX23 > AX23 > AX23?
Yes, you definitely can.
I have a question. What is the password he's using in the very first step? I am trying to use the password on the device itself and its not working
If it's brand new TP-Link router, the first time you're on that page is to enter the new password.
After access point we can access internet in with 5 wireless devices
I have a "TP link archer c6 router"
My main router with Internet has its DHCP turned on... And when I change the LAN ip address of the secondary router (tp link) and then disable DHCP in tp link router (2nd router) and then connect a cable from main router to a lan port of the tp link router... There is no Internet....
Idk why it's not working
Just connect them already and try to disable dhcp after that step
I have connected my routers this same way changing ip and disable dhcp on second one
I think the method 2 is to change the router becone switch mode
I cannot log in to the management page.. It tells me that the log on is not the same as the router password. I have tried to reset the router but nothing happens it still will not let me in. I have tried admin, but now it tells me i have 4 attempts left or it will lock me out. Any ideas.. the unit was second hand.
Tell me without lan port
Please, how can i change the password of tp-link router while it is in access point mode
Your 2nd method, there is no wifi on the access point?
Yes it will be wifi, you need to go to wireless settings and put SSID name & password.. Save.
Then search wifi in your moble/laptop & connect
How can I do it wirelessly
lookup mesh networks for that
Repeater mode on second router
My TP-link routers interface looks very different (all green) and I can't for the life of me find any mention of access point :(
hello, I am using method 2. but the wifi connection has no internet. please help
I also have the same problem
Not working by wireless
There is any way that two routers can be connected wirelssly? Here we need to connect it through cable. If I want main router in room 1 and the extender router in room 3 then I need to connect these two routers through cable. I want to connect these two routers without wire and I want to use my second router as a wifi extender
For tat your router should have Range extender option in it den u can connect two routers wirelessly...i did the same thing at my home...
If you have a TPLink router, set up WDS on it and it will work as a wireless repeater
use mesh network. Last menu on left hand side.
TP link c5 ko bina wired ko kaise configured kare pls suggest me
How to connect it wirelessly?
That's a repeater an access point is for wired connection
If I do this (first method), the wifi network created by the main router stops working (no internet)
same issue
Did you connect it via wire. That worked for me. I ran a cable from main router to the archer to make it access point. I just labeled it different
connect Lan port to Lan port not wan port
Use second method
When set up as an access point, can the access point WiFi system connect multiple devices through the access point to the main router?
Absolutely. Access point is created to provide internet via wifi as well as other network ports.
Do you know what is wireless accesspoint😞
Please mention routers with range extension mode under 4,000 rupees
Boss ... don't we have to use ip routing in this ... and how can i use it .. please make a video explaining how to use ip routing ❤
In method 2- it acts like a Wireless switch.