Cheap and easy fix for GM Service Driver Assist System. Haptic system. DTC B172E or B172F

Поделиться
HTML-код
  • Опубликовано: 6 окт 2024
  • How to repair and reinstall the original Haptic Vibrator after getting the Service Driver Assist System indication on the DIC. This should be good for all 2014 to 2018 Sierra , Silverado , Yukon , Suburban. DTC B172E or B172F
    Dorman 926-368 Haptic motor actuator amzn.to/3bEenml
    Autel MS906TS amzn.to/3cKRtuS
    Autel MS906BT amzn.to/2ThGIIN
    Autel MS906 amzn.to/2ZhJ3Ht
    Autel products amzn.to/3dYDp1k
    737mechanic Amazon Store Front
    www.amazon.com...

Комментарии • 61

  • @737mechanic
    @737mechanic  3 месяца назад

    Dorman 926-368 Haptic motor actuator amzn.to/3bEenml
    Autel MS906TS amzn.to/3cKRtuS
    Autel MS906BT amzn.to/2ThGIIN
    Autel MS906 amzn.to/2ZhJ3Ht
    Autel products amzn.to/3dYDp1k
    737mechanic Amazon Store Front
    www.amazon.com/shop/737mechanic/list/CR3BU74FTDU1?ref_=cm_sw_r_cp_ud_aipsflist_aipsf737mechanic_W4QMHMJ1JD67FDBCQHRK

  • @danielosullivan1467
    @danielosullivan1467 Месяц назад +1

    Great video. I was able to do this yesterday in about 45 minutes. Just as this video shows, the wire was broken. Very cheap wire - probably 24 gauge. I was able to reconnect the haptic vibrator but I chose not to shove it back inside the seat. It is hanging harmlessly below the driver's seat. Warning light is off. Thank you for the video. I would not have attempted this otherwise.

  • @russellshirk8132
    @russellshirk8132 Год назад +5

    Thank you very much for this video. Had the exact same problem on a 2016 GMC Sierra I just bought. This explained it all and best of all, ZERO dollars to repair.

  • @scottmoody7413
    @scottmoody7413 2 месяца назад +1

    I had the same message. Took mine out to find broken wires. Soldered them and fixed it!

  • @surfcitygenecarrothersabec7634
    @surfcitygenecarrothersabec7634 Год назад +3

    WOW Even though there are a lot better camera operators,,, Yours is a superior video because you actually decided to try and fix it instead of just buying a new one and topped it off by opening it up to show how it works.. I gotta Subscribe!! Thanks

  • @chevbelair
    @chevbelair 3 года назад +2

    Just came across your video about how to repair the vibrator in the seat mine just went out today. And thanks to you I will not be heading to the dealership.

  • @dansadie8053
    @dansadie8053 4 года назад +6

    Thank you for the video, I've been dealing with the stupid alert for a year now and see how easy it is to fix it. Charles Taylor would be proud!

    • @737mechanic
      @737mechanic  4 года назад +1

      Not many people know who Charles Taylor is. I'm Impressed.

  • @WorkingWithWimberley
    @WorkingWithWimberley 3 года назад +6

    Thanks for this. I was going crazy trying to figure out why I had the “service driver assist” warning. Sure enough, it was that little actuator motor. Wire was snapped. I soldered it back together and now I’m all set!

  • @reezybreey
    @reezybreey 3 года назад +3

    This helps so much! I believe this is a common issue because I do have this issue right now! Service Driver Assist System is annoying!!

  • @soulcages01
    @soulcages01 3 года назад +4

    Excellent video and explanation of the issue! Thank you for helping us DIYers! Might be a good idea to put some sort of armored cable around it too but those splices you used are plenty strong.

  • @brianwagner7295
    @brianwagner7295 Год назад +1

    I had the same issue, and after finding this video, went out to my suburban and sure enough my left side seat vibrator wire was cut, so now I will have to do the same repair

  • @vichugo0514
    @vichugo0514 Год назад +1

    You just saved me a hunnit and fiddy buuuuuuucks 👊🏼👍🏼. Sidenote this really helped and fixed my problem you’re the real MVP!

  • @edwardwebster9051
    @edwardwebster9051 5 месяцев назад +1

    I appreciate this I just bout my 2016 it just went out today

  • @Twistedleafrodshop
    @Twistedleafrodshop 6 месяцев назад

    Thank you for the video! This was the problem on mine, easy fix!

  • @dgick1980
    @dgick1980 Год назад

    This worked on my 2015 Yukon Denali!!

  • @ALEXAPATINOAFORALEXA
    @ALEXAPATINOAFORALEXA Год назад +1

    My yukon just started doing this

  • @Torqu3d
    @Torqu3d Год назад +1

    My left side just decided to stop working. At least now I've got some information as to what I'm looking for/dealing with.

  • @richierich24d26
    @richierich24d26 Год назад +1

    Real challenge is not laughing everytime you say vibrator 🤣😂😂

  • @ahmedalwarthan8515
    @ahmedalwarthan8515 Год назад +1

    Thanks man

  • @mechntechbeau
    @mechntechbeau Год назад +1

    My 16 LTZ Suburban just started throwing this alert and my left side vibrator is inoperative

  • @tedede
    @tedede 2 года назад +1

    Excellent detail on the repair video. Thanks! Can you share what scanner you are using that covers the Body Control Module B-codes?

  • @Glitch-nr9ct
    @Glitch-nr9ct 6 месяцев назад +2

    The real question is how do you disable this God forsakenly irritating haptic motor permenantly and *not have the warning light come on?
    (Edit, looks to me like I'll could just open up that little motor housing and snip the tiny little rod with the weight on the end of it. Motor can spin it's little heart out but no vibration)

    • @737mechanic
      @737mechanic  6 месяцев назад +1

      I have thought about hooking both the vibrators to a switch so I can turn them on while driving for a little massage action.
      A co-worker has an Audi that has seat massagers that can be turned on or off for comfort.

  • @mytran2135
    @mytran2135 2 года назад

    You r very good!! Thanks

  • @helmersolis2604
    @helmersolis2604 2 года назад

    "PROFESSIONAL "

  • @stevepryce6738
    @stevepryce6738 2 года назад +1

    Nice thanks for the video. Did you get the Service driver assist system when you started the truck or was it some other time. Thanks.

    • @737mechanic
      @737mechanic  2 года назад

      It would come on when the vibrators was supposed to activate.

  • @bobbywilliams1823
    @bobbywilliams1823 8 месяцев назад +1

    Mine vibrates but still comes up with the service driver assist. Idk

  • @vishwjammu1076
    @vishwjammu1076 13 дней назад

    hi, I have Chevrolet Malibu 2020 premier and I am facing two problems. First - Driver assist system notification that is also stopping Adaptive cruise and emergency brake system to stop and other is the carplay/ android auto not working although I can connect phone via usb and play songs but cannot open carplay.
    Will that vibrator thing fix the adaptive cruise problem as well ?

  • @pennykicks
    @pennykicks 3 года назад +1

    I get this Driver Assist System error on my 14 Buick Lacrosse but no codes are coming up on the scan

  • @youzen8606
    @youzen8606 6 месяцев назад +1

    Will that disable cruise control?

    • @737mechanic
      @737mechanic  6 месяцев назад

      It never disabled my cruise.

  • @frankbottiglieri8271
    @frankbottiglieri8271 2 года назад

    Thanks, great video. What crimper are you using for the solderless connectors?

  • @farmerjohn6917
    @farmerjohn6917 2 года назад +1

    Can you not turn the vibrator off?

    • @737mechanic
      @737mechanic  2 года назад

      You might be able to. I will look next time I get in the truck.

  • @henryguerra2008
    @henryguerra2008 7 месяцев назад +1

    I have problem with side detection system how I can fix

    • @737mechanic
      @737mechanic  7 месяцев назад

      Purchase this scan tool amzn.to/3T4z56y and run a scan and see what codes you have.

  • @dtowndano
    @dtowndano 2 года назад +1

    I have a 2019 Chevrolet Blazer RS. Has anyone tried to fix this same issue on a Blazer? Any idea what a dealership would charge to fix this issue? Appreciate any feedback.

    • @737mechanic
      @737mechanic  2 года назад

      Probably going to be the same problem, even if you can't repair your old one new aftermarket ones are cheap. A dealer is going to mark up the price of the part and charge at least an hour of labor and their labor rate is probably around $120.00 or more. So my guess would maybe a total of $220.00 or more.

  • @jamesrondini4321
    @jamesrondini4321 2 года назад +1

    I been getting this in my 2016 Malibu Premier would this be under my seat?

    • @737mechanic
      @737mechanic  2 года назад +1

      Yes if you have the vibrators in you seat and one or the other doesn't work this could be the problem.

    • @jamesrondini4321
      @jamesrondini4321 2 года назад

      @@737mechanic okay I will check

  • @randy9886
    @randy9886 3 года назад +2

    This is an obvious manufacturer defect. I repaired mine twice, and it’s the same thing. Usually one wire broken. Second time it broke at the flexible plastic where it went into the motor. Had to re-solder the tabs where it connects at the motor. POS

  • @bigjoe2458
    @bigjoe2458 2 года назад

    On my GMC Serria, that same light comes on. It vibrates sometimes and sometimes it doesn't. When the light goes off it vibrates. Is there a way you can bypass the seat vibrator and make the light go OFF? I don't care if the seat vibrates or not. Does it hurt the computer or engine in any way?

    • @737mechanic
      @737mechanic  2 года назад

      You would probably have to replace the motor with a resister of a similar value to the motor windings so the computer thinks the motor is there.

  • @7genvirginia110
    @7genvirginia110 4 года назад +1

    Hey 737 - do you have any experience with the adaptive cruise control not working on GMC products?

  • @cluke50
    @cluke50 2 года назад

    Once the sensor is repaired do the codes need to be cleared? My service drivers assist system message is on in my 15 Escalade. It’s driving me nuts. I ordered two new sensors and plugged them in to check to see if the message cleared and it didn’t.
    What all components make this message pop up? Is it just the seat vibrators?

    • @737mechanic
      @737mechanic  2 года назад

      Both the right and left Haptic Motors share a ground and both power feeds run directly to the Memory Seat module. About the only thing it can be is the haptic motors or a bad module if the wring is good. I would clear the codes and keep them plugged in and see what happens.

  • @cwsosby
    @cwsosby 3 года назад

    I replaced the left vibrator in the drivers seat because I had an error message. Sure enough the wire was broke. My error message is gone, but it won’t vibrate. Thoughts?

    • @737mechanic
      @737mechanic  3 года назад

      New vibrator could be seized up.

    • @cwsosby
      @cwsosby 3 года назад +1

      Disconnected the battery for a few minutes and that did the trick. Thanks

  • @dellajackson4107
    @dellajackson4107 3 года назад

    curious mines do not vibrate when i come close to a object but does when I'm changing lanes. Would this work with that issue or is it a whole different problem I am having?

    • @737mechanic
      @737mechanic  3 года назад

      Different problem I would think.

  • @cherylhandmadewithlove338
    @cherylhandmadewithlove338 Год назад

    My 2016 Yukon does this. Annoying. 😱

  • @vishwjammu1076
    @vishwjammu1076 13 дней назад

    hi, I have Chevrolet Malibu 2020 premier and I am facing two problems. First - Driver assist system notification that is also stopping Adaptive cruise and emergency brake system to stop and other is the carplay/ android auto not working although I can connect phone via usb and play songs but cannot open carplay.
    Will that vibrator thing fix the adaptive cruise problem as well ?

    • @737mechanic
      @737mechanic  13 дней назад

      No, I don't think that will fix the cruise.

    • @vishwjammu1076
      @vishwjammu1076 13 дней назад

      @@737mechanic i got the diagnostics done hu chevrolet and they said everything is working fine, the camera and the sensors. Any idea why the adaptive cruise is not working ? My lane change assist works fine and the manual cruise also works. Vehicle also detects the pedestrians or vehicles in front but the emergency brake and the adaptive cruise doesn't work.

    • @737mechanic
      @737mechanic  13 дней назад

      @@vishwjammu1076 Without connecting a scan tool and seeing if there are any codes, and doing a test of the switches and buttons to see if they are working I can't say what the problem is.