At certain point the rock could had just simply pushed over and finished this dicking around, or as the Brits would say cocking about. It’s quite annoying to watch amateurs making something simple into something complicated.
I would install a different tip, more like a flat chisel with an inside curve and possibly a rough serration on the edge. It may not last as long as a pointed tip, but would be much faster to get the crusher up and running at capacity. The pointed tip tends to slip off too much.
There is a reason, why most of the set ups use hooks. Unless the bit placed vertically, it is inherently unstable & can not deliver the force. It is a slow process for such angled applications.
Reading all the comments some of you have no idea how technical it is to operate a rock breaker with breaking it or flicking the spider cap of the crusher
Hey 武馨, do you have an email address at which we could contact you regarding this video? We would be interested to discuss a license to use this video if this is generally possible? (i.e. via email) :) Cheers, Felix
Better solution: Fire the load foreman at the dig site for allowing skip loaders to be loaded with oversized tailings. These boulders should not make it to the trucks until they're first broken up.
The idea is to remove the obstruction...the operator is “breaker” fixated...the first smack got it where it needed to be then he could have just knocked it down in the hole...painful to watch...
At certain point the rock could had just simply pushed over and finished this dicking around, or as the Brits would say cocking about. It’s quite annoying to watch amateurs making something simple into something complicated.
Great idea needs a good operator instead of what is possibly just the manager having a quick go of a new toy
I would install a different tip, more like a flat chisel with an inside curve and possibly a rough serration on the edge. It may not last as long as a pointed tip, but would be much faster to get the crusher up and running at capacity. The pointed tip tends to slip off too much.
I was initially thinking this too , but he probably can’t see anything and relying on someone else’s direction ? Maybe , just a thought
@@nickmeier9356 And camera with dust wiper/washer on boom
like watching paint dry..
Is this the first time the operator used this piece of equipment?
now there would just have to be someone who can operate the thing properly ^^ : D
They will get better with experience. Crack the nut flip the nut, quick as. Better than the old hook idea, it could only flip the nut.
It look like a salesman running it trying to get them to pay for the hammer when all they need is a pick on that thing to push it down.
The sharp point is doing them no favors.
There is a reason, why most of the set ups use hooks. Unless the bit placed vertically, it is inherently unstable & can not deliver the force. It is a slow process for such angled applications.
It helps if you have a competent operator
Ilyen béna gépkezelővel még nem találkoztam!
Watching this was painful , is the operator on lunch ?
Better than a crude hook, but still suboptimal here regarding positional actuation.
Perhaps the operator was new?
Encore un doué !!!!
If the hammer had a camera on it, how much time could or would save?
Reading all the comments some of you have no idea how technical it is to operate a rock breaker with breaking it or flicking the spider cap of the crusher
Oh boy…
How does this perform with a blunt chisel instead of moil..
Must of been a learner operator
i wonder if this operators parents had any children that survived birth
I think that operator is paid hourly?
You need a better operator and this will work amazingly
Ba cái mũi nhọn hàng ngang là xong👍
About as efficient as the ol’ analog hook 🤷🏼♂️
The guy running that hammer is useless
I read your comment as I’m watching this video and took a sip of pop and almost spit it out laughing so hard 🤣🤣🤣👊🏽👊🏽👊🏽
Пока смотрел, чуть нервный срыв не получил 😡
操作師智商有帶加強 早早就給他撥一下就下去了 還一定要用打的 搞那麽久
So richtig viel Geschick hat der Mann am Specht nicht😢
👍☘️
Those types of hydraulic breakers/hammers always have weak lateral strength. Without straight-line impact they are less than desirable.
It took him 4 minutes to try dislodge the rock rather then break it.
Need a new set up !
Someone is stoned
Hey 武馨, do you have an email address at which we could contact you regarding this video? We would be interested to discuss a license to use this video if this is generally possible? (i.e. via email) :) Cheers, Felix
Were is the HOOK?
Haha operator belajar ini bro
Un poco torpe rompiendo la piedra
well there was 6 minutes of incomptence, rather than 30 seconds of work!
You have more intelligent than the rock🤯
Rammer hammer breaker..
Better solution: Fire the load foreman at the dig site for allowing skip loaders to be loaded with oversized tailings. These boulders should not make it to the trucks until they're first broken up.
هيه خلص مبدعا كل هل قد
This is almost as frustrating as the hook!
The idea is to remove the obstruction...the operator is “breaker” fixated...the first smack got it where it needed to be then he could have just knocked it down in the hole...painful to watch...
L'operatore non mi sembra molto capace.
Your fired.
เปลี่ยนคนเจาะ
Oida! A so deppert ogschdoin! Der braucht doch des Ding bloß rübadran dann foids aloa nei!
Tem bicho ruim.
What a bad operator
Ohh for Christ sake just spin it with the hammer and push it in jesus
complete failure. next time bring someone down who can operate the machine
Ha! Doesn't work! A rock crushing rotating jaw on an excavator arm could both retrieve and crush big rocks!
Я дал бы орден за тупость .
bisognerebbe mettere escavatoristi bravi non come questo
That operator did a great job👍👍👍👏🏻👏🏻👏🏻👏🏻
Cambia operatore che questo nn ce buono nulla
Poor operator skills.
Бездарь! Близко к установке пускать нельзя.
כבר אני סבל שעה3 עבוד 😬😬😡
אבן גדול גרם סבל
לילה עבוד סבל ☝בוכה זרק
Worst operator ever seen🤦♂️🤦♂️🤦♂️
This is frustrating to watch as an operator. No skill no vision
долго до тупого доходило, что его надо было сдвинуть