DIY// Rustic Faux Beam Mantel for Under $30
HTML-код
- Опубликовано: 6 сен 2024
- So my wife wanted me to build her a Mantel. So I decided on this easy DIY version of a Rustic Faux Beam Mantel and i was able to purchase all the materials for under $30 You can easily scale this down and make a set of shelves with the same process. It will really set off your dull fireplace and add an attractive focal point in the room.
I made a set of plans available here: dimensionswoodw...
#mantle #mantel #diy #woodworking
Check out my other projects on Instagram here: / dimensions_woodworks
Best video explaining what you are actually doing! Thanks!
Hope it helps!
Awesome video and explanation - hope to have something like this in my home soon! Thank you!
That was made a few years ago (pre-Covid) so it may be a little more than $30 now but it’s still a great affordable project! Hope the video helps you tackle it!
You made this look so simple!! Much more than the other videos I've seen. Thanks for sharing your talent.
Hope it helps you with your project!
Thanks for posting this... you inspired me to make a beautiful 5’x9”x5” mantle and it came out amazing. I used my miter saw for the side pieces, but big mistake... I found out my miter saw is off and ended up using putty to fill in gaps, but somehow, you can’t notice... but next piece, I will ONLY USE ONE TOOL for consistency purposes.
Glad you were able to get it done! I wouldn’t say to do away with the miter saw , but you definitely want to dial it in. Pretty much any decent saw can be adjusted and there are several videos on just how to do it 😃 Merry Christmas 🎄
Nicely done dude 👊🏽 it turned out good
Thanks brother! Not bad for a 1 day project. I usually take a LOT longer to get a build done.
Thanks brother! Not bad for a 1 day project. I usually take a LOT longer to get a build done.
Nothing wrong with a good one day build
What grit sandpaper did you use? and did you apply any coat to seal the stain?
What grit sandpaper did you use to finish the edges? Did you start with 120 and go up from there?
On anything i stain, i typically only go up to 120. Too fine and the pigment won’t adhere to the fibers in the wood correctly
What size are the pin nails being used? I currently have 1”
It’s a 23ga 1” pin. That’s all you need. The glue is holding it, not the pin nails. And you can probably get away with no pins and just use tape as clamps....
I'm doing this! Could you please tell me the wood piece dimensions? Like the french clete, did you get a 2x4 or a 1x2? What was it? And your beam looks square all the way around with the same thickness on all three sides. Is it possible to have the two and bottom be 12 inches and the one facing out, 8 inches?
I think i actually used a 1x4 for the cleat. Dimensions of each side don’t matter as long as your miters are good. Thanks for watching.
@@dimensionswoodworks what type of wood glue did you use?
Brand doesn’t matter, but i prefer gorilla glue. No need for water resistance in this application
Do you remember the actual color of the stain you used?
It’s a varathane color called Kona
@@dimensionswoodworks Thank you!
@@craftedbykvg4649 no problem!
What type of wood did you use?
Pine. Douglas Fir to be exact. Sold at Lowe’s in the select pine section.
didn't you mean new 23 gauge nailer?
Yeah what did i say?
@@dimensionswoodworks you didn't say "new". You mentioned that on IG.
yeah try getting that for under $30 now. more like $60
Yeah it was posted 4 years ago, pre Covid prices will never return….
Make it wooden with woodprix.